Isabelle Czernichowski-Lauriol

Bio: Isabelle Czernichowski-Lauriol is an academic researcher. The author has contributed to research in topics: Carbonate & Aquifer. The author has an hindex of 10, co-authored 13 publications receiving 1074 citations.

Two-dimensional reactive transport modeling of CO2 injection in a saline aquifer at the Sleipner site, North Sea

Abstract: This paper presents a 2D reactive transport model of long-term geological storage of carbon dioxide. A data set from the Utsira formation in Sleipner (North Sea) is utilized for geochemical simulation, while the aquifer is approximated as a 2D cylindrically symmetric system. Using the reactive transport code TOUGHREACT, a 25 year injection scenario followed by a 10,000 year storage period are simulated. Supercritical CO2 migration, dissolution of the CO2 in the brine, and geochemical reactions with the host rock are considered in the model. Two mineralogical assemblages are considered in the Utsira formation, a sand formation that is highly permeable and a shale formation representing four semi-permeable layers in the system that reduce the upward migration of the supercritical CO2. The impacts of mineral dissolution and precipitation on porosity are calculated. Furthermore, the 2D cylindrical geometry of the mesh allows simulating both the upward migration of the supercritical gas bubble as well as the downward migration of the brine containing dissolved CO2. A mass balance of the CO2 stored in, respectively, the supercritical phase, dissolved in the aqueous phase, and sequestered in solid mineral phases (carbonate precipitation) is calculated over time. Simulations with lower residual gas saturation and with different mesh refinement are also performed to test the sensitivity on mass balance estimates.

CO2 Sequestration in Deep Sedimentary Formations

Abstract: Carbon dioxide capture and sequestration (CCS) in deep geological formations has recently emerged as an important option for reducing greenhouse emissions. If CCS is implemented on the scale needed to make noticeable reductions in atmospheric CO2, a billion metric tons or more must be sequestered annually—a 250 fold increase over the amount sequestered today. Securing such a large volume will require a solid scientific foundation defining the coupled hydrologic-geochemical-geomechanical processes that govern the long-term fate of CO2 in the subsurface. Also needed are methods to characterize and select sequestration sites, subsurface engineering to optimize performance and cost, approaches to ensure safe operation, monitoring technology, remediation methods, regulatory overview, and an institutional approach for managing long-term liability.

Separation and Capture of CO2 from Large Stationary Sources and Sequestration in Geological Formations—Coalbeds and Deep Saline Aquifers

Abstract: The topic of global warming as a result of increased atmospheric CO2 concentration is arguably the most important environmental issue that the world faces today. It is a global problem that will need to be solved on a global level. The link between anthropogenic emissions of CO2 with increased atmospheric CO2 levels and, in turn, with increased global temperatures has been well established and accepted by the world. International organizations such as the United Nations Framework Convention on Climate Change (UNFCCC) and the Intergovernmental Panel on Climate Change (IPCC) have been formed to address this issue. Three options are being explored to stabilize atmospheric levels of greenhouse gases (GHGs) and global temperatures without severely and negatively impacting standard of living: (1) increasing energy efficiency, (2) switching to less carbon-intensive sources of energy, and (3) carbon sequestration. To be successful, all three options must be used in concert. The third option is the subject of this review. Specifically, this review will cover the capture and geologic sequestration of CO2 generated from large point sources, namely fossil-fuel-fired power gasification plants. Sequestration of CO2 in geological formations is necessary to meet the President's Global Climate Change Initiative target of an 18% reduction in GHG intensity by 2012. Further, the best strategy to stabilize the atmospheric concentration of CO2 results from a multifaceted approach where sequestration of CO2 into geological formations is combined with increased efficiency in electric power generation and utilization, increased conservation, increased use of lower carbon-intensity fuels, and increased use of nuclear energy and renewables. This review covers the separation and capture of CO2 from both flue gas and fuel gas using wet scrubbing technologies, dry regenerable sorbents, membranes, cryogenics, pressure and temperature swing adsorption, and other advanced concepts. Existing commercial CO2 capture facilities at electric power-generating stations based on the use of monoethanolamine are described, as is the Rectisol process used by Dakota Gasification to separate and capture CO2 from a coal gasifier. Two technologies for storage of the captured CO2 are reviewed--sequestration in deep unmineable coalbeds with concomitant recovery of CH4 and sequestration in deep saline aquifers. Key issues for both of these techniques include estimating the potential storage capacity, the storage integrity, and the physical and chemical processes that are initiated by injecting CO2 underground. Recent studies using computer modeling as well as laboratory and field experimentation are presented here. In addition, several projects have been initiated in which CO2 is injected into a deep coal seam or saline aquifer. The current status of several such projects is discussed. Included is a commercial-scale project in which a million tons of CO2 are injected annually into an aquifer under the North Sea in Norway. The review makes the case that this can all be accomplished safely with off-the-shelf technologies. However, substantial research and development must be performed to reduce the cost, decrease the risks, and increase the safety of sequestration technologies. This review also includes discussion of possible problems related to deep injection of CO2. There are safety concerns that need to be addressed because of the possibilities of leakage to the surface and induced seismic activity. These issues are presented along with a case study of a similar incident in the past. It is clear that monitoring and verification of storage will be a crucial part of all geological sequestration practices so that such problems may be avoided. Available techniques include direct measurement of CO2 and CH4 surface soil fluxes, the use of chemical tracers, and underground 4-D seismic monitoring. Ten new hypotheses were formulated to describe what happens when CO2 is pumped into a coal seam. These hypotheses provide significant insight into the fundamental chemical, physical, and thermodynamic phenomena that occur during coal seam sequestration of CO2.

Recent developments on carbon capture and storage: An overview

Abstract: The Intergovernmental Panel on Climate Change assumes the warming of the climate system, associating the increase of global average temperature to the observed increase of the anthropogenic greenhouse gas (GHG) concentrations in the atmosphere. Carbon dioxide (CO 2 ) is considered the most important GHG, due to the dependence of world economies on fossil fuels, since their combustion processes are the most important sources of this gas. CO 2 concentrations are increasing in the last decades mainly due to the increase of anthropogenic emissions. The processes involving CO 2 capture and storage is gaining attention on the scientific community as an alternative for decreasing CO 2 emission, reducing its concentration in ambient air. However, several technological, economical and environmental issues as well as safety problems remain to be solved, such as the following needs: increase of CO 2 capture efficiency, reduction of process costs, and verification of environmental sustainability of CO 2 storage. This paper aims to review the recent developments (from 2006 until now) on the carbon capture and storage (CCS) methodologies. Special attention was focused on the basic findings achieved in CCS operational projects.