Istvan Siró

Bio: Istvan Siró is an academic researcher from Technical University of Denmark. The author has contributed to research in topics: Cellulose & Surface roughness. The author has an hindex of 7, co-authored 8 publications receiving 2693 citations.

Microfibrillated cellulose and new nanocomposite materials: a review

Abstract: Due to their abundance, high strength and stiffness, low weight and biodegradability, nano-scale cellulose fiber materials (e.g., microfibrillated cellulose and bacterial cellulose) serve as promising candidates for bio-nanocomposite production. Such new high-value materials are the subject of continuing research and are commercially interesting in terms of new products from the pulp and paper industry and the agricultural sector. Cellulose nanofibers can be extracted from various plant sources and, although the mechanical separation of plant fibers into smaller elementary constituents has typically required high energy input, chemical and/or enzymatic fiber pre-treatments have been developed to overcome this problem. A challenge associated with using nanocellulose in composites is the lack of compatibility with hydrophobic polymers and various chemical modification methods have been explored in order to address this hurdle. This review summarizes progress in nanocellulose preparation with a particular focus on microfibrillated cellulose and also discusses recent developments in bio-nanocomposite fabrication based on nanocellulose.

Highly transparent films from carboxymethylated microfibrillated cellulose : The effect of multiple homogenization steps on key properties

Abstract: We produced microfibrillated cellulose by passing carboxymethylated sulfite-softwood-dissolving pulp with a relatively low hemicellulose content (4.5%) through a high-shear homogenizer. The resulti ...

Physical properties and morphology of films prepared from microfibrillated cellulose and microfibrillated cellulose in combination with amylopectin

Abstract: Two types of microfibrillated cellulose (MFC) were prepared using either a sulfite pulp containing a high amount of hemicellulose (MFC 1) or a carboxymethylated dissolving pulp (MFC 2). MFC gels were then combined with amylopectin solutions to produce solvent-cast MFC-reinforced amylopectin films. Tensile testing revealed that MFC 2-reinforced films exhibited a more ductile behavior and that MFC 1-reinforced films had higher modulus of elasticity (E-modulus) at MFC loadings of 50 wt % or higher. Pure MFC films had relatively low oxygen permeability values when data were compared with those for a variety of other polymer films. MFC 1 and MFC 2 films had similar opacity but differences in appearance which were attributed to the presence of some larger fibers and nanofiber agglomerates in MFC 2. Field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM) were used to illustrate the morphology of MFC nanofibers in pure films and in an amylopectin matrix.

Polyhydroxyalkanoates (PHAs) for food packaging

Abstract: This chapter addresses the basic and applied characteristics of polyhydroxyalkanoates (PHAs) in the context of their potential future development for food packaging applications. The introduction provides a brief overview of the chemistry and synthesis of PHAs. This is followed by an outline of commercial developments to date and a main section in which the properties of PHAs and PHA-based nanocomposites of greatest relevance to food packaging are discussed. Past research on PHA foams and coatings is outlined and the chapter concludes with a summary as well as possible future trends and suggestions for further reading.

Cellulose nanomaterials review: structure, properties and nanocomposites

Abstract: This critical review provides a processing-structure-property perspective on recent advances in cellulose nanoparticles and composites produced from them. It summarizes cellulose nanoparticles in terms of particle morphology, crystal structure, and properties. Also described are the self-assembly and rheological properties of cellulose nanoparticle suspensions. The methodology of composite processing and resulting properties are fully covered, with an emphasis on neat and high fraction cellulose composites. Additionally, advances in predictive modeling from molecular dynamic simulations of crystalline cellulose to the continuum modeling of composites made with such particles are reviewed (392 references).

Key advances in the chemical modification of nanocelluloses

Abstract: Nanocelluloses, including nanocrystalline cellulose, nanofibrillated cellulose and bacterial cellulose nanofibers, have become fascinating building blocks for the design of new biomaterials. Derived from the must abundant and renewable biopolymer, they are drawing a tremendous level of attention, which certainly will continue to grow in the future driven by the sustainability trend. This growing interest is related to their unsurpassed quintessential physical and chemical properties. Yet, owing to their hydrophilic nature, their utilization is restricted to applications involving hydrophilic or polar media, which limits their exploitation. With the presence of a large number of chemical functionalities within their structure, these building blocks provide a unique platform for significant surface modification through various chemistries. These chemical modifications are prerequisite, sometimes unavoidable, to adapt the interfacial properties of nanocellulose substrates or adjust their hydrophilic–hydrophobic balance. Therefore, various chemistries have been developed aiming to surface-modify these nano-sized substrates in order to confer to them specific properties, extending therefore their use to highly sophisticated applications. This review collocates current knowledge in the research and development of nanocelluloses and emphasizes more particularly on the chemical modification routes developed so far for their functionalization.