Author
J.D. Embury
Other affiliations: University of Cambridge, University of Queensland, University of British Columbia ...read more
Bio: J.D. Embury is an academic researcher from McMaster University. The author has contributed to research in topics: Deformation (engineering) & Strain hardening exponent. The author has an hindex of 54, co-authored 258 publications receiving 10556 citations. Previous affiliations of J.D. Embury include University of Cambridge & University of Queensland.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this paper, the nucleation and growth of voids during tensile straining has been studied in spheroidized carbon-steels, and the results from the literature are compared with a simple theory of void nucleation.
747 citations
TL;DR: In this article, an empirical model has been developed to relate the flow stress of the drawn wire to the spacing of substructural barriers in terms of the drafting strain, which indicates that this type of strengthening mechanism is operative in the case of drawn iron wire of commercial purity.
510 citations
TL;DR: In this article, the hardness of the multilayers for layer thicknesses (h) > 50 nm is explained by Hall-Petch model with grain boundaries and interfaces as barriers.
348 citations
TL;DR: In this article, a semiquantitative theory has been developed for the formation of precipitate free zones at grain boundaries and the results have been used to develop a model of nucleation by vacancy/solute atom clusters.
323 citations
TL;DR: In this article, the internal stresses in tension and compression in an extruded and artificially aged Mg-7.7at.% Al alloy have been determined by in-situ neutron diffraction.
Abstract: Internal stresses in tension and compression in an extruded and artificially aged Mg-7.7at.% Al alloy have been determined by in-situ neutron diffraction. Measurements were made on grains having the c axis normal to, parallel to and at 62° from the stress axis, and on the reinforcing phase. The results are consistent with basal slip and {1012} twinning. The second-phase particles of Mg17Al12 bear much higher stresses than the magnesium matrix does. A simple mean stress model proposed by Brown and Clarke is shown to describe adequately the strengthening due to the particles. Twinning manifests itself clearly through variations in the integrated intensity of diffraction peaks during loading. Most of the observed variations in scattered peak intensity can be explained by referring to the lattice reorientation produced by {1012} twinning. The calculated stress tensors corresponding to these intensity variations have been used to show that a critical resolved shear stress criterion is applicable for {...
294 citations
Cited by
More filters
[...]
TL;DR: In this paper, a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) is presented.
Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These
9,929 citations
TL;DR: The mechanical properties of nanocrystalline materials are reviewed in this paper, with emphasis on their constitutive response and on the fundamental physical mechanisms, including the deviation from the Hall-Petch slope and possible negative slope, the effect of porosity, the difference between tensile and compressive strength, the limited ductility, the tendency for shear localization, fatigue and creep responses.
3,828 citations
TL;DR: The possibilities for manufacturing metal foams or other porous metallic structures are reviewed in this article, where various manufacturing processes are classified according to the state of matter in which the metal is processed, such as solid, liquid, gaseous or ionised.
3,294 citations
TL;DR: In this article, the effects of particle size, particle/matrix interface adhesion and particle loading on the stiffness, strength and toughness of such particulate polymer composites are reviewed.
Abstract: There have been a number of review papers on layered silicate and carbon nanotube reinforced polymer nanocomposites, in which the fillers have high aspect ratios. Particulate–polymer nanocomposites containing fillers with small aspect ratios are also an important class of polymer composites. However, they have been apparently overlooked. Thus, in this paper, detailed discussions on the effects of particle size, particle/matrix interface adhesion and particle loading on the stiffness, strength and toughness of such particulate–polymer composites are reviewed. To develop high performance particulate composites, it is necessary to have some basic understanding of the stiffening, strengthening and toughening mechanisms of these composites. A critical evaluation of published experimental results in comparison with theoretical models is given.
2,767 citations
TL;DR: In this article, the authors report measurements of the oxide scale thickness and oxide grain size as a function of time during the oxidation of high-purity nickel in the temperature range 500-800°C.
Abstract: Below 1000°C the oxidation of nickel cannot be controlled by the diffusion of ions through the bulk crystal lattice of the pure oxide, because the measured oxidation rates are several orders of magnitude faster than would be predicted on this basis. Short-circuit diffusion through oxide grain boundaries or dislocations has usually been held responsible, but there has hitherto been no proper quantitative confirmation of this mechanism. We report measurements of the oxide scale thickness and oxide grain size as a function of time during the oxidation of high-purity nickel in the temperature range 500–800°C. All the oxidation experiments were carried out in pure oxygen at a pressure of one atmosphere. The measured parabolic oxidation rate constants have been compared with those calculated from grain boundary diffusion data obtained in our previous work, using a grain boundary diffusion model for the oxidation process. The quantitative agreement between measured and calculated oxidation rates shows c...
2,579 citations