J. Friso van der Veen

Bio: J. Friso van der Veen is an academic researcher from Paul Scherrer Institute. The author has contributed to research in topics: Diffraction & Fresnel zone. The author has an hindex of 5, co-authored 9 publications receiving 270 citations.

Diffraction-limited storage rings - a window to the science of tomorrow.

Abstract: This article summarizes the contributions in this special issue on Diffraction-Limited Storage Rings. It analyses the progress in accelerator technology enabling a significant increase in brightness and coherent fraction of the X-ray light provided by storage rings. With MAX IV and Sirius there are two facilities under construction that already exploit these advantages. Several other projects are in the design stage and these will probably enhance the performance further. To translate the progress in light source quality into new science requires similar progress in aspects such as optics, beamline technology, detectors and data analysis. The quality of new science will be limited by the weakest component in this value chain. Breakthroughs can be expected in high-resolution imaging, microscopy and spectroscopy. These techniques are relevant for many fields of science; for example, for the fundamental understanding of the properties of correlated electron materials, the development and characterization of materials for data and energy storage, environmental applications and bio-medicine.

Confinement-induced liquid ordering investigated by x-ray phase retrieval

Abstract: Using synchrotron x-ray diffraction, we have determined the ensemble-averaged density profile of colloidal fluids within confining channels of different widths. We observe an oscillatory ordering-disordering behavior of the colloidal particles as a function of the channel width, while the colloidal solution remains in the liquid state. This phenomenon has been suggested by surface force studies of hard-sphere fluids and also theoretically predicted, but here we see it by direct measurements of the structure for comparable systems.

X-ray reflectivity theory for determining the density profile of a liquid under nanometre confinement

Abstract: An X-ray reflectivity theory on the determination of the density profile of a molecular liquid under nanometre confinement is presented. The confinement geometry acts like an X-ray interferometer, which consists of two opposing atomically flat single-crystal mica membranes with an intervening thin liquid film of variable thickness. The X-rays reflected from the parallel crystal planes (of known structure) and the layered liquid in between them (of unknown structure) interfere with one another, making X-ray reflectivity highly sensitive to the liquid's density profile along the confinement direction. An expression for the reflected intensity as a function of momentum transfer is given. The total structure factor intensity for the liquid-filled confinement device is derived as a sum of contributions from the inner and outer crystal terminations. The method presented readily distinguishes the confined liquid from the liquid adsorbed on the outer mica surfaces. It is illustrated for the molecular liquid tetrakis(trimethyl)siloxysilane, confined by two mica surfaces at a distance of 8.6 nm.

High-resolution Fresnel zone plate fabrication by achromatic spatial frequency multiplication with extreme ultraviolet radiation.

Abstract: We used an approach based on the self-imaging property of gratings to fabricate high-resolution Fresnel zone plates (FZPs). Under certain conditions, the illumination of a parent ZP with a wideband EUV beam produces a radially oscillating intensity distribution with double the spatial frequency of the ZP. This intensity distribution is observed in a certain distance range, given by the local zone width, the focal length of the ZP, and the spectral bandwidth of the illuminating beam. This phenomenon has been used to lithographically record daughter ZPs that have approximately half the zone width, thus twice the resolution, of the parent ZP. FZPs with zone widths as low as 30 nm have been fabricated in this way. Use of this technique in the extreme ultraviolet (EUV) region has the potential for high throughput production of FZPs and similar high-resolution diffraction optics with variable spatial frequency for the EUV and x-ray regions.

X-Rays and Extreme Ultraviolet Radiation: Principles and Applications

Abstract: This self-contained, comprehensive book describes the fundamental properties of soft x-rays and extreme ultraviolet (EUV) radiation and discusses their applications in a wide variety of fields, including EUV lithography for semiconductor chip manufacture and soft x-ray biomicroscopy. The author begins by presenting the relevant basic principles such as radiation and scattering, wave propagation, diffraction, and coherence. He then goes on to examine a broad range of phenomena and applications. The topics covered include EUV lithography, biomicroscopy, spectromicroscopy, EUV astronomy, synchrotron radiation, and soft x-ray lasers. He also provides a great deal of useful reference material such as electron binding energies, characteristic emission lines and photo-absorption cross-sections. The book will be of great interest to graduate students and researchers in engineering, physics, chemistry, and the life sciences. It will also appeal to practicing engineers involved in semiconductor fabrication and materials science.

Directed self-assembly of block copolymers for use in bit patterned media fabrication

Abstract: Reduction of the bit size in conventional magnetic recording media is becoming increasingly difficult due to the superparamagnetic limit. Bit patterned media (BPM) has been proposed as a replacement technology as it will enable hard disk areal densities to increase past 1 Tb in−2. Block copolymer directed self-assembly (BCP DSA) is the leading candidate for forming BPM due to its ability to create uniform patterns over macroscopic areas. Here we review the latest research into two different BCP DSA techniques: graphoepitaxy and chemoepitaxy (or chemical prepatterning). In addition to assessing their potential for forming high density bit patterns, we also review current approaches using these techniques for forming servo patterns, which are required for hard disk drive (HDD) operation. Finally, we review the current state of UV nanoimprint lithography, which is the favoured technique for enabling mass production of BPM HDDs.

Synchrotron X-ray Analytical Techniques for Studying Materials Electrochemistry in Rechargeable Batteries

Abstract: Rechargeable battery technologies have ignited major breakthroughs in contemporary society, including but not limited to revolutions in transportation, electronics, and grid energy storage The remarkable development of rechargeable batteries is largely attributed to in-depth efforts to improve battery electrode and electrolyte materials There are, however, still intimidating challenges of lower cost, longer cycle and calendar life, higher energy density, and better safety for large scale energy storage and vehicular applications Further progress with rechargeable batteries may require new chemistries (lithium ion batteries and beyond) and better understanding of materials electrochemistry in the various battery technologies In the past decade, advancement of battery materials has been complemented by new analytical techniques that are capable of probing battery chemistries at various length and time scales Synchrotron X-ray techniques stand out as one of the most effective methods that allow for near

Angle-Resolved Photoemission Studies of Quantum Materials

Abstract: Angle-resolved photoemission spectroscopy (ARPES) has emerged as a leading experimental probe for studying the complex phenomena in quantum materials, a subject of increasing importance The power of this technique stems from the directness and the richness of the momentum-resolved information it can provide, such as band dispersion, Fermi surface topology, and electron self-energy Over the past decade, the significantly improved energy and momentum resolution and carefully matched experiments have turned this technique into a sophisticated tool in characterizing the electronic structure of complex materials This revolution is mostly evident in the study of cuprate high-temperature superconductors More recently, this technique has played a critical role in advancing our understanding of the newly discovered iron-based superconductors and topological insulators In this paper we review some of the recent ARPES results and discuss the future perspective in this rapidly developing field