J. Hilsenbeck

Bio: J. Hilsenbeck is an academic researcher from Ferdinand-Braun-Institut. The author has contributed to research in topics: Wurtzite crystal structure & Wide-bandgap semiconductor. The author has an hindex of 2, co-authored 2 publications receiving 2408 citations.

Two-dimensional electron gases induced by spontaneous and piezoelectric polarization charges in N- and Ga-face AlGaN/GaN heterostructures

Abstract: Carrier concentration profiles of two-dimensional electron gases are investigated in wurtzite, Ga-face AlxGa1−xN/GaN/AlxGa1−xN and N-face GaN/AlxGa1−xN/GaN heterostructures used for the fabrication of field effect transistors. Analysis of the measured electron distributions in heterostructures with AlGaN barrier layers of different Al concentrations (0.15

Comparison of N-face and Ga-face AlGaN/GaN-Based High Electron Mobility Transistors Grown by Plasma-Induced Molecular Beam Epitaxy

Abstract: Nominally undoped GaN/AlxGa1-xN/GaN high electron mobility transistors were grown by plasma-induced molecular beam epitaxy in order to study the formation and electric transport properties of two-dimensional electron gases. By depositing an AlN nucleation layer on sapphire substrates before the growth of the GaN buffer layer, we were able to change the polarity of the wurtzite films from N- to Ga-face. The change in polarity causes a change in the sign of the spontaneous and piezoelectric polarization directed along the c-axis of the strained AlGaN barrier. The sign and the gradient in polarization at one of the GaN/AlGaN interfaces is mainly responsible for the generation and confinement of the two-dimensional electron gas. Ga- and N-face heterostructures with mobilities up to 1050 and 1200 cm2/Vs, respectively, and sheet carrier concentrations of up to 1.2×1013 cm-2 at room temperature were realized. Transistors processed from heterostructures with both polarities show maximum source-drain currents between 800 and 850 mA/mm and a transconductance of up to 250 mS/mm.

Band parameters for III–V compound semiconductors and their alloys

Abstract: We present a comprehensive, up-to-date compilation of band parameters for the technologically important III–V zinc blende and wurtzite compound semiconductors: GaAs, GaSb, GaP, GaN, AlAs, AlSb, AlP, AlN, InAs, InSb, InP, and InN, along with their ternary and quaternary alloys. Based on a review of the existing literature, complete and consistent parameter sets are given for all materials. Emphasizing the quantities required for band structure calculations, we tabulate the direct and indirect energy gaps, spin-orbit, and crystal-field splittings, alloy bowing parameters, effective masses for electrons, heavy, light, and split-off holes, Luttinger parameters, interband momentum matrix elements, and deformation potentials, including temperature and alloy-composition dependences where available. Heterostructure band offsets are also given, on an absolute scale that allows any material to be aligned relative to any other.

AlGaN/GaN HEMTs-an overview of device operation and applications

Abstract: Wide bandgap semiconductors are extremely attractive for the gamut of power electronics applications from power conditioning to microwave transmitters for communications and radar. Of the various materials and device technologies, the AlGaN/GaN high-electron mobility transistor seems the most promising. This paper attempts to present the status of the technology and the market with a view of highlighting both the progress and the remaining problems.

Alternative Plasmonic Materials: Beyond Gold and Silver

Abstract: Materials research plays a vital role in transforming breakthrough scientific ideas into next-generation technology. Similar to the way silicon revolutionized the microelectronics industry, the proper materials can greatly impact the field of plasmonics and metamaterials. Currently, research in plasmonics and metamaterials lacks good material building blocks in order to realize useful devices. Such devices suffer from many drawbacks arising from the undesirable properties of their material building blocks, especially metals. There are many materials, other than conventional metallic components such as gold and silver, that exhibit metallic properties and provide advantages in device performance, design flexibility, fabrication, integration, and tunability. This review explores different material classes for plasmonic and metamaterial applications, such as conventional semiconductors, transparent conducting oxides, perovskite oxides, metal nitrides, silicides, germanides, and 2D materials such as graphene. This review provides a summary of the recent developments in the search for better plasmonic materials and an outlook of further research directions.

Two dimensional electron gases induced by spontaneous and piezoelectric polarization in undoped and doped AlGaN/GaN heterostructures

Abstract: Two dimensional electron gases in Al x Ga 12x N/GaN based heterostructures, suitable for high electron mobility transistors, are induced by strong polarization effects. The sheet carrier concentration and the confinement of the two dimensional electron gases located close to the AlGaN/GaN interface are sensitive to a large number of different physical properties such as polarity, alloy composition, strain, thickness, and doping of the AlGaN barrier. We have investigated these physical properties for undoped and silicon doped transistor structures by a combination of high resolution x-ray diffraction, atomic force microscopy, Hall effect, and capacitance‐voltage profiling measurements. The polarization induced sheet charge bound at the AlGaN/GaN interfaces was calculated from different sets of piezoelectric constants available in the literature. The sheet carrier concentration induced by polarization charges was determined

The impact of surface states on the DC and RF characteristics of AlGaN/GaN HFETs

Abstract: GaN based HFETs are of tremendous interest in applications requiring high power at microwave frequencies. Although excellent current-voltage (I-V) characteristics and record high output power densities at microwave frequencies have been achieved, the origin of the 2DEG and the factors limiting the output power and reliability of the devices under high power operation remain uncertain. Drain current collapse has been the major obstacle in the development of reliable high power devices. We show that the cause of current collapse is a charging up of a second virtual gate, physically located in the gate drain access region. Due to the large bias voltages present on the device during a microwave power measurement, surface states in the vicinity of the gate trap electrons, thus acting as a negatively charged virtual gate. The maximum current available from a device during a microwave power measurement is limited by the discharging of this virtual gate. Passivated devices located adjacent to unpassivated devices on the same wafer show almost no current collapse, thus demonstrating that proper surface passivation prevents the formation of the virtual gate. The possible mechanisms by which a surface passivant reduces current collapse and the factors affecting reliability and stability of such a passivant are discussed.