J.J. Hassan

Bio: J.J. Hassan is an academic researcher from University of Basrah. The author has contributed to research in topics: Nanorod & Chemical bath deposition. The author has an hindex of 16, co-authored 31 publications receiving 925 citations. Previous affiliations of J.J. Hassan include Universiti Sains Malaysia.

A high-sensitivity room-temperature hydrogen gas sensor based on oblique and vertical ZnO nanorod arrays

Abstract: The high surface area to volume ratio, the networks connections of vertically and oblique nanorod arrays, and the absence of seed layer, were the key factors responsible for the high sensitivity of ZnO nanorod arrays based hydrogen sensor at room temperature. Arrays of vertical and oblique zinc oxide nanorods were grown on a c -plane sapphire substrate by microwave-assisted chemical bath deposition. Polyvinyl alcohol (PVA)–Zn(OH) 2 nanocomposites were used as a novel seed material to seed the sapphire substrate prior to the growth of the ZnO nanorods. The hydrogen sensing capabilities of the ZnO nanorod arrays, without the use of a metal catalyst, were investigated at room temperature. The rods exhibited excellent sensitivity, of 500%, in the presence of 1000 ppm of H 2 while consuming an ultralow level of power ( 2 gas. Hysteresis was noticed in the sensor for different concentrations of H 2 at different temperatures. It can be surmised that this hydrogen gas sensor has potential for use as a portable room-temperature gas sensor.

High sensitivity and fast response and recovery times in a ZnO nanorod array/p-Si self-powered ultraviolet detector

Abstract: High quality, vertically aligned ZnO nanorods were grown on a silicon substrate, using microwave-assisted chemical bath deposition with poly (vinyl alcohol)-Zn(OH)2 nanocomposites as seed layer. The structure and surface morphology of the prepared ZnO nanorod arrays were characterized using X-ray diffraction and scanning electron microscopy. The optical properties were assessed using photoluminescence measurements; the results showed a high-intensity UV peak, and a lower intensity, broader visible peak. Upon exposure to 395 nm light at a zero-bias voltage, the UV detector showed a high sensitivity of 8000% and fast response and recovery times of 25 and 22 ms, respectively.

Room-temperature gas sensing of ZnO-based gas sensor: A review

Abstract: Novel gas sensors with high sensing properties, simultaneously operating at room temperature are considerably more attractive owing to their low power consumption, high security and long-term stability. Till date, zinc oxide (ZnO) as semiconducting metal oxide is considered as the promising resistive-type gas sensing material, but elevated operating temperature becomes the bottleneck of its extensive applications in the field of real-time gas monitoring, especially in flammable and explosive gas atmosphere. In this respect, worldwide efforts have been devoted to reducing the operating temperature by means of multiple methods In this communication, room-temperature gas sensing properties of ZnO based gas sensors are comprehensively reviewed. Much more attention is particularly paid to the effective strategies that create room-temperature gas sensing of ZnO based gas sensors, mainly including surface modification, additive doping and light activation. Finally, some perspectives for future investigation on room-temperature gas-sensing materials are discussed as well.

Synthesis, characterization, and applications of ZnO nanowires

Abstract: ZnO nanowires (or nanorods) have been widely studied due to their unique material properties and remarkable performance in electronics, optics, and photonics. Recently, photocatalytic applications of ZnO nanowires are of increased interest in environmental protection applications. This paper presents a review of the current research of ZnO nanowires (or nanorods) with special focus on photocatalysis. We have reviewed the semiconducting photocatalysts and discussed a variety of synthesis methods of ZnO nanowires and their corresponding effectiveness in photocatalysis. We have also presented the characterization of ZnO nanowires from the literature and from our own measurements. Finally, a wide range of uses of ZnO nanowires in various applications is highlighted in this paper.

Advances in designs and mechanisms of semiconducting metal oxide nanostructures for high-precision gas sensors operated at room temperature

Abstract: High-precision gas sensors operated at room temperature are attractive for various real-time gas monitoring applications, with advantages including low energy consumption, cost effectiveness and device miniaturization/flexibility. Studies on sensing materials, which play a key role in good gas sensing performance, are currently focused extensively on semiconducting metal oxide nanostructures (SMONs) used in the conventional resistance type gas sensors. This topical review highlights the designs and mechanisms of different SMONs with various patterns (e.g. nanoparticles, nanowires, nanosheets, nanorods, nanotubes, nanofilms, etc.) for gas sensors to detect various hazardous gases at room temperature. The key topics include (1) single phase SMONs including both n-type and p-type ones; (2) noble metal nanoparticle and metal ion modified SMONs; (3) composite oxides of SMONs; (4) composites of SMONs with carbon nanomaterials. Enhancement of the sensing performance of SMONs at room temperature can also be realized using a photo-activation effect such as ultraviolet light. SMON based mechanically flexible and wearable room temperature gas sensors are also discussed. Various mechanisms have been discussed for the enhanced sensing performance, which include redox reactions, heterojunction generation, formation of metal sulfides and the spillover effect. Finally, major challenges and prospects for the SMON based room temperature gas sensors are highlighted.

Recent Developments in One-Dimensional Inorganic Nanostructures for Photodetectors

Abstract: With large surface-to-volume ratios and Debye length comparable to their small sizes, one-dimensional inorganic nanostructures have extensively been investigated and widely used to fabricate high-performance nanoscale electronic and optoelectronic devices This feature article reviews the state-of-the-art research activities that focus on the one-dimensional inorganic nanostructures and their photodetector applications It begins with a survey of one-dimensional inorganic nanostructures and the fundamentals of photodetectors Some remarkable photoresponse characteristics are then presented, which are organized into sections covering several kinds of important nanostructures, such as ZnO, V 2 O 5 , ZnS, In 2 Se 3 , InSe, CdS, CdSe, ZnSe, Sb 2 Se 3 , ZrS 2 , Ag 2 S, and Zn x Cd 1-x Se Each section describes the corresponding photodetective properties in detail Finally, the article concludes with some perspectives and outlook on the future developments in the field

Nanowires for Electrochemical Energy Storage.

Abstract: Nanomaterials provide many desirable properties for electrochemical energy storage devices due to their nanoscale size effect, which could be significantly different from bulk or micron-sized materials. Particularly, confined dimensions play important roles in determining the properties of nanomaterials, such as the kinetics of ion diffusion, the magnitude of strain/stress, and the utilization of active materials. Nanowires, as one of the representative one-dimensional nanomaterials, have great capability for realizing a variety of applications in the fields of energy storage since they could maintain electron transport along the long axis and have a confinement effect across the diameter. In this review, we give a systematic overview of the state-of-the-art research progress on nanowires for electrochemical energy storage, from rational design and synthesis, in situ structural characterizations, to several important applications in energy storage including lithium-ion batteries, lithium-sulfur batteries, sodium-ion batteries, and supercapacitors. The problems and limitations in electrochemical energy storage and the advantages in utilizing nanowires to address the issues and improve the device performance are pointed out. At the end, we also discuss the challenges and demonstrate the prospective for the future development of advanced nanowire-based energy storage devices.