J.-J. Werner

Bio: J.-J. Werner is an academic researcher from Bell Labs. The author has contributed to research in topics: Blind equalization & Single-pair high-speed digital subscriber line. The author has an hindex of 4, co-authored 4 publications receiving 773 citations.

The multimodulus blind equalization and its generalized algorithms

Abstract: This paper presents a new blind equalization algorithm called multimodulus algorithm (MMA). This algorithm combines the benefits of the well-known reduced constellation algorithm (RCA) and constant modulus algorithm (CMA). In addition, MMA provides more flexibility than RCA and CMA, and is better suited to take advantage of the symbol statistics of certain types of signal constellations, such as nonsquare constellations, very dense constellations, and some wrong solutions.

The HDSL environment (high bit rate digital subscriber line)

Abstract: The author presents a tutorial on the physical environment in which high bit rate digital subscriber line (HDSL) transceivers will have to evolve and succeed. Special attention is given to the most damaging impairments that are encountered in subscriber lines, such as propagation loss, linear distortion, crosstalk, bridged taps, and impulse noise. Somewhat less important impairments, such as change of gauge, temperature variation, and thermal noise, are also briefly described. The author concludes with a discussion of the capacity of a twisted-pair channel in a crosstalk-dominated environment. >

51.84 Mb/s 16-CAP ATM LAN standard

Abstract: The paper describes the characteristics and performance of the 16-CAP transmission scheme that has been chosen by the Technical Committee of the ATM Forum as the ATM LAN physical layer interface standard at 51.84 Mb/s for category 3 unshielded-twisted-pair (UTP) wiring. The two most attractive features of the 16-CAP transceiver are its capability of operating in the presence of multiple users in a voice-grade UTP cable and the straightforward way in which it can provide scalability to lower speeds. It is also shown in the paper how the carrierless AM/PM (CAP) modulation scheme used for the ATM LAN standard can be utilized to provide substantially higher data rates than 51 Mb/s when there is only one user in a cable. Under this condition, data rates up to 155 Mb/s can be achieved over category 3 wiring and significantly higher rates can be achieved over high-performance category 5 wiring. >

The multimodulus blind equalization algorithm

Abstract: This paper presents a new blind equalization algorithm called the multimodulus algorithm (MMA). This algorithm is particularly well suited to applications using two-dimensional transmission schemes such as carrierless AM/PM (CAP) and quadrature amplitude modulation (QAM). The paper also discusses some of the advantages provided by MMA when compared to traditional blind equalization algorithms, such as the reduced constellation algorithm (RCA) and the constant modulus algorithm (CMA).

Capacity Limits of Optical Fiber Networks

Abstract: We describe a method to estimate the capacity limit of fiber-optic communication systems (or ?fiber channels?) based on information theory. This paper is divided into two parts. Part 1 reviews fundamental concepts of digital communications and information theory. We treat digitization and modulation followed by information theory for channels both without and with memory. We provide explicit relationships between the commonly used signal-to-noise ratio and the optical signal-to-noise ratio. We further evaluate the performance of modulation constellations such as quadrature-amplitude modulation, combinations of amplitude-shift keying and phase-shift keying, exotic constellations, and concentric rings for an additive white Gaussian noise channel using coherent detection. Part 2 is devoted specifically to the "fiber channel.'' We review the physical phenomena present in transmission over optical fiber networks, including sources of noise, the need for optical filtering in optically-routed networks, and, most critically, the presence of fiber Kerr nonlinearity. We describe various transmission scenarios and impairment mitigation techniques, and define a fiber channel deemed to be the most relevant for communication over optically-routed networks. We proceed to evaluate a capacity limit estimate for this fiber channel using ring constellations. Several scenarios are considered, including uniform and optimized ring constellations, different fiber dispersion maps, and varying transmission distances. We further present evidences that point to the physical origin of the fiber capacity limitations and provide a comparison of recent record experiments with our capacity limit estimation.

A practical discrete multitone transceiver loading algorithm for data transmission over spectrally shaped channels

Abstract: In this paper, we present a finite-granularity, loading algorithm for a discrete multitone (DMT) modulation system. The proposed algorithm offers significant implementational advantages over the well-known water-pouring method and the earlier Hughes-Hartogs algorithm, while typically suffering only negligible performance degradation relative to the optimal solution. We also present simulation results of this loading algorithm applied to the newly proposed asymmetric digital subscriber lines (ADSL) service. >

Capacity Trends and Limits of Optical Communication Networks Discussed in this paper are: optical communication network traffic evolution trends, required capacity and challenges to reaching it, and basic limits to capacity.

Abstract: Since the first deployments of fiber-optic com- munication systems three decades ago, the capacity carried by a single-mode optical fiber has increased by a staggering 10 000 times. Most of the growth occurred in the first two decades with growth slowing to ten times in the last decade. Over the same three decades, network traffic has increased by a much smaller factor of 100, but with most of the growth occurring in the last few years, when data started dominating network traffic. At the current growth rate, the next factor of 100 in network traffic growth will occur within a decade. The large difference in growth rates between the delivered fiber capacity and the traffic demand is expected to create a capacity shortage within a decade. The first part of the paper recounts the history of traffic and capacity growth and extrapolations for the future. The second part looks into the technological chal- lenges of growing the capacity of single-mode fibers by pre- senting a capacity limit estimate of standard and advanced single-mode optical fibers. The third part presents elementary capacity considerations for transmission over multiple trans- mission modes and how it compares to a single-mode trans- mission. Finally, the last part of the paper discusses fibers supporting multiple spatial modes, including multimode and multicore fibers, and the role of digital processing techniques. Spatial multiplexing in fibers is expected to enable system capacity growth to match traffic growth in the next decades.

Capacity Trends and Limits of Optical Communication Networks

Abstract: Since the first deployments of fiber-optic communication systems three decades ago, the capacity carried by a single-mode optical fiber has increased by a staggering 10 000 times. Most of the growth occurred in the first two decades with growth slowing to ten times in the last decade. Over the same three decades, network traffic has increased by a much smaller factor of 100, but with most of the growth occurring in the last few years, when data started dominating network traffic. At the current growth rate, the next factor of 100 in network traffic growth will occur within a decade. The large difference in growth rates between the delivered fiber capacity and the traffic demand is expected to create a capacity shortage within a decade. The first part of the paper recounts the history of traffic and capacity growth and extrapolations for the future. The second part looks into the technological challenges of growing the capacity of single-mode fibers by presenting a capacity limit estimate of standard and advanced single-mode optical fibers. The third part presents elementary capacity considerations for transmission over multiple transmission modes and how it compares to a single-mode transmission. Finally, the last part of the paper discusses fibers supporting multiple spatial modes, including multimode and multicore fibers, and the role of digital processing techniques. Spatial multiplexing in fibers is expected to enable system capacity growth to match traffic growth in the next decades.

Spectrally Efficient Long-Haul Optical Networking Using 112-Gb/s Polarization-Multiplexed 16-QAM

Abstract: We discuss the generation, wavelength-division-multiplexed (WDM) long-haul transmission, and coherent detection of 112-Gb/s polarization-division-multiplexed (PDM) 16-ary quadrature amplitude modulation (16-QAM) at a line rate of 14 Gbaud and spectral efficiencies beyond 4 b/s/Hz. We describe the (off-line) digital signal processing and blind filter adaptation algorithms used in our intradyne receiver and characterize its performance using both simulated and measured 16-QAM waveforms. We measure a required optical signal-to-noise ratio of 20.2 dB (0.1-nm reference bandwidth; 10-3 bit-error ratio), 3.2-dB off the theoretical limit. We study the effects of finite analog-to-digital converter resolution, laser frequency offset, laser phase noise, and narrowband optical filtering. Our experiments on a 25-GHz WDM grid (4.1-b/s/Hz spectral efficiency) reveal a 1-dB penalty after 7 passes though reconfigurable optical add/drop multiplexers (ROADMs) and an achievable transmission reach of 1022 km of uncompensated standard single-mode fiber. At a spectral efficiency of 6.2 b/s/Hz (16.67-GHz WDM channel spacing) a transmission reach of 630 km is attained.