Fabrication and characterisation of Al–7Si–0.35Mg/fly ash metal matrix composites processed by different stir casting routes

A356 Al–fly ash particle composites were fabricated using stir-cast technique and hot extrusion. Composites containing 6 and 12 vol.% fly ash particles were processed. Narrow size range (53–106 μm) and wide size range (0.5–400 μm) fly ash particles were used. Hardness, tensile strength, compressive strength and damping characteristics of the unreinforced alloy and composites have been measured. Bulk hardness, matrix microhardness, 0.2% proof stress of A356 Al–fly ash composites are higher compared to that of the unreinforced alloy. Additions of fly ash lead to increase in hardness, elastic modulus and 0.2% proof stress. Composites reinforced with narrow size range fly ash particle exhibit superior mechanical properties compared to composites with wide size range particles. A356 Al–fly ash MMCs were found to exhibit improved damping capacity when compared to unreinforced alloy at ambient temperature.

Synthesis of fly ash particle reinforced A356 Al composites and their characterization

A functionally graded syntactic foam material for high energy absorption under compression

Recent progress in aluminum metal matrix composites: A review on processing, mechanical and wear properties

In this contribution, authors present a review on the state-of-the-art in the utilization of industrial and agricultural waste materials for the development of metal–matrix composites (MMCs), providing, through the judicious analysis of an ample and varied references source – from the oldest to the newest ones – an insight into the challenges and opportunities for the exploitation to their full potential. In addition to its topicality, the novelty of this contribution lies in the presentation of key statistical, technical, and property-related information of a comprehensive variety of waste materials classed into two main groups, namely, fly ash reinforced MMCs and MMCs derived from other waste materials. Although fly ash has been exploited in a broad range of applications, the attention paid for its use in the development of MMCs seems to be insufficient. A purposely designed chart helped to pinpoint the more demanding and profitable applications of fly ash, and establish strategic opportunity ar...

Development of metal-matrix composites from industrial/agricultural waste materials and their derivatives

Loose beds of hollow fly ash particles (cenospheres) were pressure infiltrated with A356 alloy melt to fabricate metal-matrix syntactic foam, using applied pressure up to 275 kPa. The volume fractions of cenospheres in the composites were in the range of 20–65%. The processing variables included melt temperature, gas pressure and particles size of fly ash. The effect of these processing variables on the microstructure and compressive properties of the synthesized composites is characterized. Compressive tests performed on these metal-matrix composites containing different volume fractions of hollow fly ash particles showed that their yield stress, Young's modulus, and plateau stress increase with an increase in the density. Variations in the compressive properties of the composites in the present study were compared with other foam materials.

J.K. Kim

Papers

Compressive characteristics of A356/fly ash cenosphere composites synthesized by pressure infiltration technique