J. K. Surprenant

Bio: J. K. Surprenant is an academic researcher. The author has contributed to research in topics: Battery (electricity) & Electrolytic cell. The author has an hindex of 2, co-authored 2 publications receiving 560 citations.

A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte

Abstract: Prototype cells of the configuration Li/~5M S as , THF, have been characterized with regard to capacity, rate, and rechargeability. Virtually 100% of the theoretical capacity could be realized at 50°C at rates below 1.0 mA/cm2. In high rate cell configurations, 75% cathode utilization is possible at ~4 mA/cm2 (C/3–C/4 rate). The capacities at high rate are enhanced by Lewis acids, although the ultimate cause of rate limitation is passivation of the current collector by discharge products. The self‐discharge rates of Li in contact with 4–5M S (as ) solutions reveal capacity losses of 0.5%/day at 25°C to 4.4%/day at 71°C. Based on the experimental results, a practical energy density of ~300 W‐hr kg−1 is possible using a standard cell design. Results on the battery's rechargeability are briefly reviewed.

A lithium/dissolved sulfur battery with an organic electrolyte

Abstract: Prototype cells of the configuration Li/~5M S as , THF, have been characterized with regard to capacity, rate, and rechargeability. Virtually 100% of the theoretical capacity could be realized at 50°C at rates below 1.0 mA/cm2. In high rate cell configurations, 75% cathode utilization is possible at ~4 mA/cm2 (C/3–C/4 rate). The capacities at high rate are enhanced by Lewis acids, although the ultimate cause of rate limitation is passivation of the current collector by discharge products. The self‐discharge rates of Li in contact with 4–5M S (as ) solutions reveal capacity losses of 0.5%/day at 25°C to 4.4%/day at 71°C. Based on the experimental results, a practical energy density of ~300 W‐hr kg−1 is possible using a standard cell design. Results on the battery's rechargeability are briefly reviewed.

Li-O2 and Li-S batteries with high energy storage.

Abstract: Li-ion batteries have transformed portable electronics and will play a key role in the electrification of transport. However, the highest energy storage possible for Li-ion batteries is insufficient for the long-term needs of society, for example, extended-range electric vehicles. To go beyond the horizon of Li-ion batteries is a formidable challenge; there are few options. Here we consider two: Li-air (O(2)) and Li-S. The energy that can be stored in Li-air (based on aqueous or non-aqueous electrolytes) and Li-S cells is compared with Li-ion; the operation of the cells is discussed, as are the significant hurdles that will have to be overcome if such batteries are to succeed. Fundamental scientific advances in understanding the reactions occurring in the cells as well as new materials are key to overcoming these obstacles. The potential benefits of Li-air and Li-S justify the continued research effort that will be needed.

The Li-ion rechargeable battery: a perspective.

Abstract: Each cell of a battery stores electrical energy as chemical energy in two electrodes, a reductant (anode) and an oxidant (cathode), separated by an electrolyte that transfers the ionic component of the chemical reaction inside the cell and forces the electronic component outside the battery. The output on discharge is an external electronic current I at a voltage V for a time Δt. The chemical reaction of a rechargeable battery must be reversible on the application of a charging I and V. Critical parameters of a rechargeable battery are safety, density of energy that can be stored at a specific power input and retrieved at a specific power output, cycle and shelf life, storage efficiency, and cost of fabrication. Conventional ambient-temperature rechargeable batteries have solid electrodes and a liquid electrolyte. The positive electrode (cathode) consists of a host framework into which the mobile (working) cation is inserted reversibly over a finite solid–solution range. The solid–solution range, which is...

Challenges in the development of advanced Li-ion batteries: a review

Abstract: Li-ion battery technology has become very important in recent years as these batteries show great promise as power sources that can lead us to the electric vehicle (EV) revolution. The development of new materials for Li-ion batteries is the focus of research in prominent groups in the field of materials science throughout the world. Li-ion batteries can be considered to be the most impressive success story of modern electrochemistry in the last two decades. They power most of today's portable devices, and seem to overcome the psychological barriers against the use of such high energy density devices on a larger scale for more demanding applications, such as EV. Since this field is advancing rapidly and attracting an increasing number of researchers, it is important to provide current and timely updates of this constantly changing technology. In this review, we describe the key aspects of Li-ion batteries: the basic science behind their operation, the most relevant components, anodes, cathodes, electrolyte solutions, as well as important future directions for R&D of advanced Li-ion batteries for demanding use, such as EV and load-leveling applications.

A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries

Abstract: The Li-S battery has been under intense scrutiny for over two decades, as it offers the possibility of high gravimetric capacities and theoretical energy densities ranging up to a factor of five beyond conventional Li-ion systems. Herein, we report the feasibility to approach such capacities by creating highly ordered interwoven composites. The conductive mesoporous carbon framework precisely constrains sulphur nanofiller growth within its channels and generates essential electrical contact to the insulating sulphur. The structure provides access to Li+ ingress/egress for reactivity with the sulphur, and we speculate that the kinetic inhibition to diffusion within the framework and the sorption properties of the carbon aid in trapping the polysulphides formed during redox. Polymer modification of the carbon surface further provides a chemical gradient that retards diffusion of these large anions out of the electrode, thus facilitating more complete reaction. Reversible capacities up to 1,320 mA h g(-1) are attained. The assembly process is simple and broadly applicable, conceptually providing new opportunities for materials scientists for tailored design that can be extended to many different electrode materials.