J. M. Lauerhaas

Bio: J. M. Lauerhaas is an academic researcher from Northwestern University. The author has contributed to research in topics: Carbon nanotube & Pyrene. The author has an hindex of 6, co-authored 7 publications receiving 901 citations.

A nanotube-based field-emission flat panel display

Abstract: A matrix addressable diode flat panel display has been fabricated using a carbon nanotube–epoxy composite as the electron emission source. Field-emission uniformity has been confirmed by measuring the I–V curves of pixels across the panel. This prototype display demonstrates well-lit pixels under ±150 V biasing signals. The “on” and “off” of the pixels are well controlled by the half voltage “off-pixel” method. Further improvement of this technology may lead to easy-to-make and inexpensive flat panel displays.

A method for synthesizing large quantities of carbon nanotubes and encapsulated copper nanowires

Abstract: A method using a hydrogen arc for synthesizing large quantities of carbon nanotubes filled with pure copper is reported. The interaction of small copper clusters with polycyclic aromatic hydrocarbons (PAHs) is shown to form carbon nanotubes and encapsulated copper nanowires. The effectiveness of this model is demonstrated by showing that no copper filled nanotubes are formed in a helium arc that does not generate PAHs. A direct proof of this model is demonstrated by using pyrene, a PAH molecule, to grow carbon nanotubes and encapsulated copper nanowires.

The effect of arc parameters on the growth of carbon nanotubes

Abstract: The influence of starting carbon material on the generation of carbon nanotubes is investigated. Comparisons are made between oriented graphite, randomly oriented graphite, carbon black, and a polycyclic aromatic hydrocarbon as carbon sources in helium and hydrogen arcs. Transmission electron microscopy investigation of the redeposited rod formed on the cathode and the soot from the chamber walls provides evidence for the building blocks that lead to the nanostructures formed. It is postulated that polycyclic aromatic hydrocarbons are precursors for carbon nanotube growth in a hydrogen arc. While, in the case of helium, low molecular weight carbon ions and molecules have been previously hypothesized by others to be the building blocks for nanotube growth.

Synthesis of Large Arrays of Well-Aligned Carbon Nanotubes on Glass

Abstract: Free-standing aligned carbon nanotubes have previously been grown above 700°C on mesoporous silica embedded with iron nanoparticles. Here, carbon nanotubes aligned over areas up to several square centimeters were grown on nickel-coated glass below 666°C by plasma-enhanced hot filament chemical vapor deposition. Acetylene gas was used as the carbon source and ammonia gas was used as a catalyst and dilution gas. Nanotubes with controllable diameters from 20 to 400 nanometers and lengths from 0.1 to 50 micrometers were obtained. Using this method, large panels of aligned carbon nanotubes can be made under conditions that are suitable for device fabrication.

Fully sealed, high-brightness carbon-nanotube field-emission display

Abstract: A fully sealed field-emission display 4.5 in. in size has been fabricated using single-wall carbon nanotube (CNT)-organic binders. The fabricated displays were fully scalable at low temperature, below 415 °C, and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1 V/μm and field emission current of 1.5 mA at 3 V/μm (J=90 μA/cm2) were observed. Brightness of 1800 cd/m2 at 3.7 V/μm was observed on the entire area of a 4.5 in. panel from the green phosphor-indium–tin–oxide glass. The fluctuation of the current was found to be about 7% over a 4.5 in. cathode area.

Effect of Chemical Oxidation on the Structure of Single-Walled Carbon Nanotubes

Abstract: In the present study, we report the systematic investigation of the effect of chemical oxidation on the structure of single-walled carbon nanotubes (SWNTs) by using different oxidants. The oxidation procedure was characterized by using infrared spectroscopy and transmission electron microscopy (TEM). The SWNTs were produced by chemical vapor deposition (CVD) and oxidized with three kinds of oxidants: (1) nitric acid (2.6 M), (2) a mixture of concentrated sulfuric acid (98 wt %) and concentrated nitric acid (16 M) (v/v = 3/1) and (3) KMnO4. The results reveal that the different functional groups can be introduced when the SWNTs are treated with different oxidants. Refluxing in dilute nitric acid can be considered as a mild oxidation for SWNTs, introducing the carboxylic acid groups only at those initial defects that already exist. The abundance of the carboxylic acid groups generated with this oxidant remained constant along with the treating time. In contrast, sonication of SWNTs in H2SO4/HNO3 increased ...

Large Scale CVD Synthesis of Single-Walled Carbon Nanotubes

Abstract: The synthesis of bulk amounts of high quality single-walled carbon nanotubes (SWNTs) is accomplished by optimizing the chemical compositions and textural properties of the catalyst material used in the chemical vapor deposition (CVD) of methane A series of catalysts are derived by systematically varying the catalytic metal compounds and support materials The optimized catalysts consist of Fe/Mo bimetallic species supported on a novel silica−alumina multicomponent material The high SWNT yielding catalyst exhibits high surface-area and large mesopore volume at elevated temperatures Gram quantities of SWNT materials have been synthesized in ∼05 h using the optimized catalyst material The nanotube material consists of individual and bundled SWNTs that are free of defects and amorphous carbon coating This work represents a step forward toward obtaining kilogram scale perfect SWNT materials via simple CVD routes