J. Naveen

Bio: J. Naveen is an academic researcher from VIT University. The author has contributed to research in topics: Materials science & Ultimate tensile strength. The author has an hindex of 14, co-authored 33 publications receiving 842 citations. Previous affiliations of J. Naveen include Universiti Putra Malaysia & Kongu Engineering College.

Ballistic performance of natural fiber based soft and hard body armour- A mini Review

Abstract: Increase in awareness towards utilization of eco-friendly materials, encouraged the researchers to find a sustainable alternative to synthetic fibers for different engineering applications. High performance Kevlar fabrics are widely used in ballistic applications such as bullet proof helmets, vest, and other armour systems. Ballistic impact produces shock waves which may cause severe trauma injuries to the soldiers. Kevlar fabric based armour system provides acceptable range of protection to the soldiers. However, disposal of Kevlar affects the eco system and pollutes the environment. Replacing Kevlar fabric in the protective structures with an eco-friendly light weight material, together with an improved kinetic energy absorption and dissipation has become an interesting approach to enhance the ballistic performance of the composite panels. This mini review addresses the effect of adding different natural fibers on the ballistic performance of soft and multilayered hard body armour systems. Many researchers explored the possibility of utilizing eco-friendly natural fibers (Kenaf, Cocos nucifera sheath, Malva, rami, curaua, bagasse, jute, bamboo) as an alternate material to Kevlar fabric in the armour system and reported that natural fibers can act as a potential reinforcement in the ballistic structures

Mechanical properties of laminated kenaf woven fabric composites for below-knee prosthesis socket application

Abstract: Prosthesis is a process of creating artificial human body part. The primary function of below-knee prosthesis is controlling the leg during static and dynamic conditions. The aim of this study is to develop a prosthetic socket made from kenaf-glass fiber composite. The development of prosthetic socket with kenaf-glass fiber was carried out as an attempt to substitute prosthetic socket made from fiberglass polyester composites. Lamination method was adopted to fabricate the prosthetic socket. The laminates contain woven kenaf, glass silk knitted fabric and nylon knitted fabric. The effect of kenaf fabric layering sequence on the volumetric and mechanical properties were evaluated. The flexural and impact strength of 2 layers of kenaf fiber-based laminates are 7.11 MPa and 16.7 kJ/m2 respectively which is higher than the single layer kenaf fabric-based composites. From the results woven kenaf fabric composites has the potential to replace the existing glass fabric-based polymer composites. It is a great initiative to fabricate a prosthetic socket which biodegradable, environmental friendly, locally available, lightweight, comfortable and psychosocially acceptable.

Effects of layering sequence and gamma radiation on mechanical properties and morphology of Kevlar/oil palm EFB/epoxy hybrid composites

Abstract: The present study evaluates the tensile and flexural properties, including the morphological features of gamma radiated Kevlar/oil palm empty fruit bunch (EFB)/epoxy hybrid composites fabricated using hand lay-up method with different layering sequences. The fabricated hybrid composites were exposed to different gamma radiation doses: 25 kGy, 50 kGy and 150 kGy. Mechanical (tensile and flexural) and morphological properties were evaluated by using universal testing machine and scanning electron microscopy, respectively. Results obtained indicated that tensile strength of hybrid composites were effected by layering sequence. The layering sequence involving the use of EFB as core material yielded better mechanical performance compared to the layering pattern when Kevlar served as the core material. The tensile and flexural properties of hybrid composites showed an improvement for irradiated samples at a low radiation level. Hybrid composites displayed decrease in tensile strength at 50 kGy whereas flexural strength still showed an improvement. However, at 150 kGy, the tensile and flexural properties exhibited significant degradation. FESEM of tensile fracture composites showed the exist of fibre pull out and voids. However, at 150 kV bigger and ruptured voids were observed. It can be concluded from this finding that mechanical performance of Kevlar/EFB/Kevlar hybrid composites after Gamma radiation, has made it as promising material for automotive, aerospace and construction applications.

Characterization of New Cellulosic Cyrtostachys renda and Ptychosperma macarthurii Fibers from Landscaping Plants

Abstract: Cyrtostachys renda (CR) and Ptychosperma macarthurii (PM) fibers, as new cellulosic fibers were studied. The objective of this research is to evaluate the fibers from stem, leaf stalk, and frond of...

Characterization of Hybrid Oil Palm Empty Fruit Bunch/Woven Kenaf Fabric-Reinforced Epoxy Composites.

Abstract: In this research, the physical, mechanical and morphological properties of oil palm empty fruit bunch (EFB) mat/woven kenaf fabric-reinforced epoxy composites have been investigated. The oil palm EFB/woven kenaf fabrics were varied, with weight ratios of 50/0 (T1), 35/15 (T2), 25/25 (T3), 15/35 (T4) and 0/50 (T5). The composites were fabricated using a simple hand lay-up technique followed by hot pressing. The result obtained shows that an increase in kenaf fiber content exhibited higher tensile and flexural properties. On the other hand, the opposite trend was observed in the impact strength of hybrid composites, where an increase in kenaf fiber content reduced the impact strength. This can be corroborated with the physical properties analysis, where a higher void content, water absorption and thickness swelling were observed for pure oil palm EFB (T1) composites compared to other samples. The scanning electron microscopy analysis results clearly show the different failure modes of the tensile fractured samples. Statistical analysis was performed using one-way ANOVA and shows significant differences between the obtained results.

Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications.

Abstract: Composites have been found to be the most promising and discerning material available in this century. Presently, composites reinforced with fibers of synthetic or natural materials are gaining more importance as demands for lightweight materials with high strength for specific applications are growing in the market. Fiber-reinforced polymer composite offers not only high strength to weight ratio, but also reveals exceptional properties such as high durability; stiffness; damping property; flexural strength; and resistance to corrosion, wear, impact, and fire. These wide ranges of diverse features have led composite materials to find applications in mechanical, construction, aerospace, automobile, biomedical, marine, and many other manufacturing industries. Performance of composite materials predominantly depends on their constituent elements and manufacturing techniques, therefore, functional properties of various fibers available worldwide, their classifications, and the manufacturing techniques used to fabricate the composite materials need to be studied in order to figure out the optimized characteristic of the material for the desired application. An overview of a diverse range of fibers, their properties, functionality, classification, and various fiber composite manufacturing techniques is presented to discover the optimized fiber-reinforced composite material for significant applications. Their exceptional performance in the numerous fields of applications have made fiber-reinforced composite materials a promising alternative over solitary metals or alloys.

A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites

Abstract: The increasing demand for greener and biodegradable materials leading to the satisfaction of society requires a compelling towards the advancement of nano-materials science. The polymeric matrix materials with suitable and proper filler, better filler/matrix interaction together with advanced and new methods or approaches are able to develop polymeric composites which shows great prospective applications in constructions and buildings, automotive, aerospace and packaging industries. The biodegradability of the natural fibers is considered as the most important and interesting aspects of their utilization in polymeric materials. Nanocomposite shows considerable applications in different fields because of larger surface area, and greater aspect ratio, with fascinating properties. Being environmentally friendly, applications of nanocomposites offer new technology and business opportunities for several sectors, such as aerospace, automotive, electronics, and biotechnology industries. Hybrid bio-based composites that exploit the synergy between natural fibers in a nano-reinforced bio-based polymer can lead to improved properties along with maintaining environmental appeal. This review article intended to present information about diverse classes of natural fibers, nanofiller, cellulosic fiber based composite, nanocomposite, and natural fiber/nanofiller-based hybrid composite with specific concern to their applications. It will also provide summary of the emerging new aspects of nanotechnology for development of hybrid composites for the sustainable and greener environment.

Natural Fibers as Sustainable and Renewable Resource for Development of Eco-friendly Composites: A Comprehensive Review

Abstract: The increase in awareness of the damage caused by synthetic materials on the environment has led to the development of eco-friendly materials. The researchers have shown a lot of interest in developing such materials which can replace the synthetic materials. As a result, there is an increase in demand for commercial use of the natural fiber-based composites in recent years for various industrial sectors. Natural fibers are sustainable materials which are easily available in nature and have advantages like low-cost, lightweight, renewability, biodegradability and high specific properties. The sustainability of the natural fiber-based composite materials has led to upsurge its applications in various manufacturing sectors. In this paper, we have reviewed the different sources of natural fibers, their properties, modification of natural fibers, the effect of treatments on natural fibers, etc. We also summarize the major applications of natural fibers and their effective use as reinforcement for polymer composite materials.