J. Newbury

Bio: J. Newbury is an academic researcher from IBM. The author has contributed to research in topics: MOSFET & Gate dielectric. The author has an hindex of 19, co-authored 39 publications receiving 1936 citations.

High performance and highly uniform gate-all-around silicon nanowire MOSFETs with wire size dependent scaling

Abstract: We demonstrate undoped-body, gate-all-around (GAA) Si nanowire (NW) MOSFETs with excellent electrostatic scaling. These NW devices, with a TaN/Hf-based gate stack, have high drive-current performance with NFET/PFET I DSAT = 825/950 µA/µm (circumference-normalized) or 2592/2985 µA/µm (diameter-normalized) at supply voltage V DD = 1 V and off-current I OFF = 15 nA/µm. Superior NW uniformity is obtained through the use of a combined hydrogen annealing and oxidation process. Clear scaling of short-channel effects versus NW size is observed.

Characteristics and device design of sub-100 nm strained Si N- and PMOSFETs

Abstract: Current drive enhancements were demonstrated in the strained-Si PMOSFETs with sub-100 nm physical gate lengths for the first time, as well as in the NMOSFETs with well-controlled threshold voltage V/sub T/ and overlap capacitance C/sub OV/ characteristics for L/sub poly/ and L/sub eff/ below 80 nm and 60 nm. A 110% enhancement in the electron mobility was observed in the strained Si devices with 1.2% tensile strain (28% Ge content in the relaxed SiGe buffer), along with a 45% increase in the peak hole mobility.

Metal-gate FinFET and fully-depleted SOI devices using total gate silicidation

Abstract: Metal-gate FinFET and FDSOI devices were fabricated using total gate silicidation. Devices satisfy the following metal-gate technology requirements: ideal mobility, low gate leakage, high transconductance, competitive I/sub on//I/sub off/, and adjustable V/sub t/. Six silicide gate materials are presented, as well as two silicide workfunction engineering methods.

High-performance symmetric-gate and CMOS-compatible V/sub t/ asymmetric-gate FinFET devices

Abstract: Double-gate FinFET devices with asymmetric and symmetric polysilicon gates have been fabricated. Symmetric gate devices show drain currents competitive with fully optimized bulk silicon technologies. Asymmetric-gate devices show |V/sub t/|/spl sim/0.1 V, with off-currents less than 100 nA/um at V/sub gs/=0.

Interfacial oxidation process for high-k gate dielectric process integration

Abstract: A method for integrating a high-k material into CMOS processing schemes is provided. The method includes forming an interfacial oxide, oxynitride and/or nitride layer on a device region of a semiconductor substrate, said interfacial layer having a thickness of less than 10 Å; and (b) forming a high-k dielectric material on said interfacial oxide, oxynitride and/or, nitride layer, said high-k dielectric having a dielectric constant, k, of greater than 8.

Semiconductor device, and manufacturing method thereof

Abstract: An object is to provide a semiconductor device of which a manufacturing process is not complicated and by which cost can be suppressed, by forming a thin film transistor using an oxide semiconductor film typified by zinc oxide, and a manufacturing method thereof. For the semiconductor device, a gate electrode is formed over a substrate; a gate insulating film is formed covering the gate electrode; an oxide semiconductor film is formed over the gate insulating film; and a first conductive film and a second conductive film are formed over the oxide semiconductor film. The oxide semiconductor film has at least a crystallized region in a channel region.

Multigate transistors as the future of classical metal–oxide–semiconductor field-effect transistors

Abstract: For more than four decades, transistors have been shrinking exponentially in size, and therefore the number of transistors in a single microelectronic chip has been increasing exponentially. Such an increase in packing density was made possible by continually shrinking the metal–oxide–semiconductor field-effect transistor (MOSFET). In the current generation of transistors, the transistor dimensions have shrunk to such an extent that the electrical characteristics of the device can be markedly degraded, making it unlikely that the exponential decrease in transistor size can continue. Recently, however, a new generation of MOSFETs, called multigate transistors, has emerged, and this multigate geometry will allow the continuing enhancement of computer performance into the next decade.

Three-dimensional integrated circuits

Abstract: Three-dimensional (3D) integrated circuits (ICs), which contain multiple layers of active devices, have the potential to dramatically enhance chip performance, functionality, and device packing density. They also provide for microchip architecture and may facilitate the integration of heterogeneous materials, devices, and signals. However, before these advantages can be realized, key technology challenges of 3D ICs must be addressed. More specifically, the processes required to build circuits with multiple layers of active devices must be compatible with current state-of-the-art silicon processing technology. These processes must also show manufacturability, i.e., reliability, good yield, maturity, and reasonable cost. To meet these requirements, IBM has introduced a scheme for building 3D ICs based on the layer transfer of functional circuits, and many process and design innovations have been implemented. This paper reviews the process steps and design aspects that were developed at IBM to enable the formation of stacked device layers. Details regarding an optimized layer transfer process are presented, including the descriptions of 1) a glass substrate process to enable through-wafer alignment; 2) oxide fusion bonding and wafer bow compensation methods for improved alignment tolerance during bonding; 3) and a single-damascene patterning and metallization method for the creation of high-aspect-ratio (6:1 108 vias/cm2), and extremely aggressive wafer-to-wafer alignment (submicron) capability.

A 90-nm logic technology featuring strained-silicon

Abstract: A leading-edge 90-nm technology with 1.2-nm physical gate oxide, 45-nm gate length, strained silicon, NiSi, seven layers of Cu interconnects, and low-/spl kappa/ CDO for high-performance dense logic is presented. Strained silicon is used to increase saturated n-type and p-type metal-oxide-semiconductor field-effect transistors (MOSFETs) drive currents by 10% and 25%, respectively. Using selective epitaxial Si/sub 1-x/Ge/sub x/ in the source and drain regions, longitudinal uniaxial compressive stress is introduced into the p-type MOSEFT to increase hole mobility by >50%. A tensile silicon nitride-capping layer is used to introduce tensile strain into the n-type MOSFET and enhance electron mobility by 20%. Unlike all past strained-Si work, the hole mobility enhancement in this paper is present at large vertical electric fields in nanoscale transistors making this strain technique useful for advanced logic technologies. Furthermore, using piezoresistance coefficients it is shown that significantly less strain (/spl sim/5 /spl times/) is needed for a given PMOS mobility enhancement when applied via longitudinal uniaxial compression versus in-plane biaxial tension using the conventional Si/sub 1-x/Ge/sub x/ substrate approach.

Beyond the conventional transistor

Abstract: This paper focuses on approaches to continuing CMOS scaling by introducing new device structures and new materials. Starting from an analysis of the sources of improvements in device performance, we present technology options for achieving these performance enhancements. These options include high-dielectric-constant (high-k) gate dielectric, metal gate electrode, double-gate FET, and strained-silicon FET. Nanotechnology is examined in the context of continuing the progress in electronic systems enabled by silicon microelectronics technology. The carbon nanotube field-effect transistor is examined as an example of the evaluation process required to identify suitable nanotechnologies for such purposes.