Author
J.S.J. van Deventer
Bio: J.S.J. van Deventer is an academic researcher from University of Melbourne. The author has contributed to research in topics: Geopolymer & Fly ash. The author has an hindex of 29, co-authored 32 publications receiving 10910 citations.
Topics: Geopolymer, Fly ash, Compressive strength, Aluminosilicate, Silicate
Papers
More filters
TL;DR: A brief history and review of geopolymer technology is presented with the aim of introducing the technology and the vast categories of materials that may be synthesized by alkali activation of aluminosilicates as mentioned in this paper.
Abstract: A brief history and review of geopolymer technology is presented with the aim of introducing the technology and the vast categories of materials that may be synthesized by alkali-activation of aluminosilicates. The fundamental chemical and structural characteristics of geopolymers derived from metakaolin, fly ash and slag are explored in terms of the effects of raw material selection on the properties of geopolymer composites. It is shown that the raw materials and processing conditions are critical in determining the setting behavior, workability and chemical and physical properties of geopolymeric products. The structural and chemical characteristics that are common to all geopolymeric materials are presented, as well as those that are determined by the specific interactions occurring in different systems, providing the ability for tailored design of geopolymers to specific applications in terms of both technical and commercial requirements.
3,302 citations
TL;DR: In this paper, the effect of mineral properties on the compressive strength of the synthesized geopolymer was investigated, and it was shown that a wide range of natural Al-Si minerals could serve as potential source materials for the synthesis of geopolymers.
1,424 citations
TL;DR: In this paper, the effects of ground granulated blast furnace slag (GGBFS) on the microstructure and mechanical properties of metakaolin (MK) based geopolymers were studied.
922 citations
TL;DR: In this paper, the relationship between composition and temperature on the final chemical and physical properties of a geopolymer derived from waste materials is investigated and it is shown that the differences in reactivity of source materials, used during the synthesis of waste-based geopolymers, significantly affect the final properties of the material.
781 citations
TL;DR: In this article, the development of Young's modulus of geopolymers between 7 and 28 days was observed to be dependent on alkali, with the Youngs moduli of Na-specimens decreasing at low Si/Al ratio, but increasing at high Si /Al ratio.
674 citations
Cited by
More filters
TL;DR: A brief history and review of geopolymer technology is presented with the aim of introducing the technology and the vast categories of materials that may be synthesized by alkali activation of aluminosilicates as mentioned in this paper.
Abstract: A brief history and review of geopolymer technology is presented with the aim of introducing the technology and the vast categories of materials that may be synthesized by alkali-activation of aluminosilicates. The fundamental chemical and structural characteristics of geopolymers derived from metakaolin, fly ash and slag are explored in terms of the effects of raw material selection on the properties of geopolymer composites. It is shown that the raw materials and processing conditions are critical in determining the setting behavior, workability and chemical and physical properties of geopolymeric products. The structural and chemical characteristics that are common to all geopolymeric materials are presented, as well as those that are determined by the specific interactions occurring in different systems, providing the ability for tailored design of geopolymers to specific applications in terms of both technical and commercial requirements.
3,302 citations
TL;DR: In this article, the utilization of fly ash in construction, as a low-cost adsorbent for the removal of organic compounds, flue gas and metals, light weight aggregate, mine back fill, road sub-base, and zeolite synthesis is discussed.
2,117 citations
TL;DR: In this paper, the potential position of and drivers for inorganic polymers (“geopolymers”) as an element of the push for a sustainable concrete industry are discussed.
1,444 citations
TL;DR: In this paper, the effect of mineral properties on the compressive strength of the synthesized geopolymer was investigated, and it was shown that a wide range of natural Al-Si minerals could serve as potential source materials for the synthesis of geopolymers.
1,424 citations
TL;DR: In this paper, a mechanistic model accounting for reduced structural reorganization and densification in the microstructure of geopolymer gels with high concentrations of soluble silicon in the activating solution has been proposed.
1,309 citations