J. S. Lange

Bio: J. S. Lange is an academic researcher from University of Hamburg. The author has contributed to research in topics: Large Hadron Collider & Physics. The author has an hindex of 160, co-authored 2083 publications receiving 145919 citations. Previous affiliations of J. S. Lange include National Technical University of Athens & University of Trento.

Validating gravitational-wave detections: The advanced LIGO hardware injection system

Abstract: Hardware injections are simulated gravitational-wave signals added to the Laser Interferometer Gravitational-wave Observatory (LIGO). The detectors' test masses are physically displaced by an actuator in order to simulate the e�ects of a gravitational wave. The simulated signal initiates a control-system response which mimics that of a true gravitational wave. This provides an end-toend test of LIGO's ability to observe gravitational waves. The gravitational-wave analyses used to detect and characterize signals are exercised with hardware injections. By looking for discrepancies between the injected and recovered signals, we are able to characterize the performance of analyses and the coupling of instrumental subsystems to the detectors' output channels. This paper describes the hardware injection system and the recovery of injected signals representing binary black hole mergers, a stochastic gravitational wave background, spinning neutron stars, and sine-Gaussians.

Measurements of the differential jet cross section as a function of the jet mass in dijet events from proton-proton collisions at √s=13 TeV

Abstract: Measurements of the differential jet cross section are presented as a function of the jet mass in dijet events, in bins of jet transverse momentum, with and without a jet grooming algorithm. The data have been recorded by the CMS Collaboration in proton-proton collisions at the LHC at a center-of-mass energy of 13 TeV and correspond to an integrated luminosity of 2.3 fb(-1). The absolute cross sections show slightly different jet transverse momentum spectra in data and Monte Carlo event generators for the settings used. Removing this transverse momentum dependence, the normalized cross section for ungroomed jets is consistent with the prediction from Monte Carlo event generators for masses below 30% of the transverse momentum. The normalized cross section for groomed jets is measured with higher precision than the ungroomed cross section. Semi-analytical calculations of the jet mass beyond leading logarithmic accuracy are compared to data, as well as predictions at leading order and next-to-leading order, which include parton showering and hadronization. Overall, in the normalized cross section, the theoretical predictions agree with the measured cross sections within the uncertainties for masses from 10 to 30% of the jet transverse momentum.

Measurement of Einstein-Podolsky-Rosen-type flavor entanglement in Υ(4S)→B0B̄0 decays

Abstract: The neutral B meson pair produced at the Upsilon(4S) should exhibit a nonlocal correlation of the type discussed by Einstein, Podolsky, and Rosen. We measure this correlation using the time-dependent flavor asymmetry of semileptonic B(0) decays, which we compare with predictions from quantum mechanics and two local realistic models. The data are consistent with quantum mechanics, and inconsistent with the other models. Assuming that some B pairs disentangle to produce B(0) and B(0) with definite flavor, we find a decoherent fraction of 0.029 +/ -0.057, consistent with no decoherence.

Measurement of top quark–antiquark pair production in association with a W or Z boson in pp collisions at √s = 8 TeV

Abstract: A measurement of the cross section for the production of top quark-antiquark pairs (ttbar) in association with a vector boson V (W or Z) in proton-proton collisions at sqrt(s) = 8 TeV is presented. The results are based on a dataset corresponding to an integrated luminosity of 19.5 inverse femtobarns recorded with the CMS detector at the LHC. The measurement is performed in three leptonic (e and mu) channels: a same-sign dilepton analysis targeting ttbar W events, and trilepton and four-lepton analyses designed for ttbar Z events. In the same-sign dilepton channel, the ttbar W cross section is measured as sigma[ttbar W] = 170 +90/-80 (stat) +/- 70 (syst) fb, corresponding to a significance of 1.6 standard deviations over the background-only hypothesis. Combining the trilepton and four-lepton channels, a direct measurement of the ttbar Z cross section, sigma[ttbar Z] = 200 +80/-70 (stat) +40/-30 (syst) fb, is obtained with a significance of 3.2 standard deviations. The measured cross sections are compatible with standard model predictions within their experimental uncertainties. The inclusive ttbar V process is observed with a significance of 3.7 standard deviations from the combination of all three leptonic channels.

Search for new non-resonant phenomena in high-mass dilepton final states with the ATLAS detector

Abstract: A search for new physics with non-resonant signals in dielectron and dimuon final states in the mass range above 2 TeV is presented. This is the first search for non-resonant signals in dilepton fi ...

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

SciPy 1.0--Fundamental Algorithms for Scientific Computing in Python

Abstract: SciPy is an open source scientific computing library for the Python programming language. SciPy 1.0 was released in late 2017, about 16 years after the original version 0.1 release. SciPy has become a de facto standard for leveraging scientific algorithms in the Python programming language, with more than 600 unique code contributors, thousands of dependent packages, over 100,000 dependent repositories, and millions of downloads per year. This includes usage of SciPy in almost half of all machine learning projects on GitHub, and usage by high profile projects including LIGO gravitational wave analysis and creation of the first-ever image of a black hole (M87). The library includes functionality spanning clustering, Fourier transforms, integration, interpolation, file I/O, linear algebra, image processing, orthogonal distance regression, minimization algorithms, signal processing, sparse matrix handling, computational geometry, and statistics. In this work, we provide an overview of the capabilities and development practices of the SciPy library and highlight some recent technical developments.

Phd by thesis

Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These