scispace - formally typeset
Search or ask a question
Author

J. W. Greig

Bio: J. W. Greig is an academic researcher. The author has contributed to research in topics: Sillimanite. The author has an hindex of 1, co-authored 1 publications receiving 203 citations.
Topics: Sillimanite

Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, a study of the equilibrium relations of mixtures of pure alumina and silica at high temperatures is presented, expressed concisely in the form of an equilibrium, diagram and their bearing on ceramic problems is discussed.
Abstract: This paper deals with a study of the equilibrium relations of mixtures of pure alumina and silica at high temperatures. The results are expressed concisely in the form of an equilibrium, diagram and their bearing on ceramic problems is discussed. The principal feature of the diagram is the absence of the compound Al2O3.SiO2, the only compound being 3Al2O3.2SiO2. Crystals of this latter compound occur in all alumina-silica refractories. The optical properties of these crystals have been determined and are compared with those of sillimanite, Al2O3.SiO2, which has hitherto been regarded as the crystalline compound occurring in refractories and clay bodies in general. The behavior of natural sillimanite on heating is discussed.

213 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: Wiederhorn et al. as mentioned in this paper reviewed the current state of mullite-related research at a fundamental level, within the framework of phase equilibria, crystal structure, synthesis, processing, and properties.
Abstract: Mullite (3AI2O3. 2Si02) is becoming increasingly important in electronic, optical, and high-temperature structural applications. This paper reviews the current state of mullite-related research at a fundamental level, within the framework of phase equilibria, crystal structure, synthesis, processing, and properties. Phase equilibria are discussed in terms of the problems associated with the nucleation kinetics of mullite and the large variations observed in the solid-solution range. The incongruent melting behavior of mullite is now widely accepted. Large variations in the solid solubility from 58 to 76 mot% alumina are related to the ordering/disordering of oxygen vacancies and are strongly coupled with the method of synthesis used to form mullite. Similarly, reaction sequences which lead to the formation of mullite upon heating depend on the spatial scale at which the components are mixed. Mixing at the atomic level is useful for lowtemperature (

612 citations

Journal ArticleDOI
TL;DR: In this paper, concentration profiles of Al/sub 2/O/sub 3/ in diffusion couples made from sapphire and fused silica were used to determine the stable equilibrium phase diagram of the system.
Abstract: Concentration profiles of Al/sub 2/O/sub 3/ in diffusion couples made from sapphire and fused silica were used to determine the stable equilibrium phase diagram of the system SiO/sub 2/--Al/sub 2/O/sub 3/. The intermediate compound mullite, 3Al/sub 2/O/sub 3/.2SiO/sub 2/, melts incongruently at 1828 +- 10/sup 0/C; its stable solid-solution region ranges from 70.5 to 74.0 wt percent Al/sub 2/O/sub 3/ below 1753/sup 0/C and from 71.6 to 74.0 wt percent at 1813/sup 0/C. The microstructures of diffusion zones and heat-treated specimens also indicate the incongruency of mullite. Additional information is given for 3 metastable systems: SiO/sub 2/-Al/sub 2/O/sub 3/ in the absence of mullite, SiO/sub 2/-ordered-mullite in the absence of alumina, and SiO/sub 2/-disordered mullite in the absence of alumina. Under metastable conditions, ordered mullite melts congruently at approximately 1880/sup 0/C and its solid-solution range extends up to approximately 77 wt percent Al/sub 2/O/sub 3/. The solid-solution range of disordered mullite extends to approximately equal to 83 wt percent Al/sub 2/O/sub 3/ with an estimated congruent melting temperature of approximately 1900/sup 0/C. The existence of metastable systems is associated with superheating of mullite above the incongruent melting temperature and with nucleation of alumina and mullite in supercooled aluminum-silicate liquids. (auth)

410 citations

Journal ArticleDOI
TL;DR: In this article, the equilibrium diagram for the system A12O3-SiO2 has been revised based on 190 runs made up to 1860°C in sealed noble-metal containers.
Abstract: On the basis of 190 runs made up to 1860°C in sealed noble-metal containers the following revisions have been made in the equilibrium diagram for the system A12O3–SiO2. Mullite melts congruently at 1850°C. The extent of equilibrium solid solution in mullite at solidus temperature is from approximately 60 mole % Al2O3 (3/2 ratio) to 63 mole % A12O3. Metastable solid solutions can be prepared up to about 67 mole % Al2O3. There is no evidence for stable solubility of excess SiO2 beyond the 3/2 composition at pressures below 3 kbars. Refractive indices are presented for glasses containing up to 60 mole % Al2O3 and from them the composition of the eutectic is confirmed at 5 mole % SiO2. The variation in lattice constants of the mullite solid solution is not an unequivocal guide to composition since mullites at one composition produced at different temperatures show differences in spacing, no doubt reflecting Al-Si ordering phenomena. The possibility of quartz and corundum being the stable assemblage at some low temperatures and pressures cannot be ruled out. A new anhydrous phase in the system is described, which was previously thought to be synthetic andalusite; it is probably a new polymorph of the Al2SiO5 composition with ortho-rhombic unit-cell dimensions a=7.55 A, b=8.27 A, and c= 5.66 A.

272 citations

Journal ArticleDOI
TL;DR: In this article, all available thermodynamic and phase diagram data have been critically assessed for all phases in the CaO-Al 2O3, Al2O3-SiO2, and CaO al2O 3-Si2 systems at 1 bar pressure from 298 K to above the liquidus temperatures.
Abstract: All available thermodynamic and phase diagram data have been critically assessed for all phases in the CaO-Al2O3, Al2O3-SiO2, and CaO-Al2O3-SiO2 systems at 1 bar pressure from 298 K to above the liquidus temperatures. All reliable data for the binary systems have been simultaneously optimized to obtain, for each system, one set of model equations for the Gibbs energy of the liquid slag and all solid phases as functions of composition and temperature. The modified quasichemical model was used for the slag. With these binary parameters and those from the optimization of the CaO-SiO2 system reported previously, the quasichemical model was used to predict the thermodynamic properties of the ternary slag. Two additional small ternary parameters were required to reproduce the ternary phase diagram and ternary activity data to within experimental error limits. The calculated optimized phase diagram and thermodynamic properties are self-consistent and are the most reliable currently available estimates of the true values.

263 citations

Journal ArticleDOI
TL;DR: In this paper, the alumina-silica phase relations of samples annealed in oxygen and quenched were studied by optical microscopy, image analysis, X-ray diffraction, and the electron microprobe.
Abstract: The alumina-silica phase relations of samples annealed in oxygen and quenched were studied by optical microscopy, image analysis, X-ray diffraction, and the electron microprobe. The solid solution boundaries of mullite changed with increasing temperature and joined at 1890°C and a composition of 77.15 wt% alumina. The melting point of mullite was 189°C with a peritectic between 76.5 and 77.0 wi% alumina.

236 citations