Jacek Namieśnik

Bio: Jacek Namieśnik is an academic researcher from Gdańsk University of Technology. The author has contributed to research in topics: Gas chromatography & Sample preparation. The author has an hindex of 72, co-authored 718 publications receiving 22822 citations. Previous affiliations of Jacek Namieśnik include University of Valencia & Maria Curie-Skłodowska University.

The 12 principles of green analytical chemistry and the SIGNIFICANCE mnemonic of green analytical practices

Abstract: The current rapid development of green analytical chemistry (GAC) requires clear, concise guidelines in the form of GAC principles that will be helpful in greening laboratory practices. The existing principles of green chemistry and green engineering need revision for their use in GAC because they do not fully meet the needs of analytical chemistry. In this article we propose a set of 12 principles consisting of known concepts (i.e. reduction in the use of reagents and energy, and elimination of waste, risk and hazard) together with some new ideas (i.e. the use of natural reagents), which will be important for the future of GAC.

Analytical eco-scale for assessing the greenness of analytical procedures

Abstract: We propose the analytical Eco-Scale as a novel comprehensive approach to evaluating the greenness of analytical methodology. It is based on assigning penalty points to parameters of an analytical process that are not in agreement with the ideal green analysis. This approach compares different parameters and different steps of the analytical process. Traditional green chemistry metrics (e.g., Atom Economy, E-factor and Reaction Mass Efficiency), which were introduced for organic preparations, do not usually fit the purposes of green analytical chemistry. Existing databases for evaluation of green analytical methods refer to known procedures and instruments, and do not encourage new, more environmentally-friendly equivalents. As an alternative to traditional green chemistry metrics, the analytical Eco-Scale can be a good, semi-quantitative tool.

Study of the selection mechanism of heavy metal (Pb2+, Cu2+, Ni2+, and Cd2+) adsorption on clinoptilolite.

Abstract: The study was carried out on the sorption of heavy metals (Ni2+, Cu2+, Pb2+, and Cd2+) under static conditions from single- and multicomponent aqueous solutions by raw and pretreated clinoptilolite. The sorption has an ion-exchange nature and consists of three stages, i.e., the adsorption on the surface of microcrystals, the inversion stage, and the moderate adsorption in the interior of the microcrystal. The finer clinoptilolite fractions sorb higher amounts of the metals due to relative enriching by the zeolite proper and higher cleavage. The slight difference between adsorption capacity of the clinoptilolite toward lead, copper, and cadmium from single- and multicomponent solutions may testify to individual sorption centers of the zeolite for each metal. The decrease of nickel adsorption from multicomponent solutions is probably caused by the propinquity of its sorption forms to the other metals and by competition. The maximum sorption capacity toward Cd2+ is determined as 4.22 mg/g at an initial concentration of 80 mg/L and toward Pb2+, Cu2+, and Ni2+ as 27.7, 25.76, and 13.03 mg/g at 800 mg/L. The sorption results fit well to the Langmuir and the Freundlich models. The second one is better for adsorption modeling at high metal concentrations.

Modern trends in solid phase extraction: New sorbent media

Abstract: Based on the recently published literature, this review provides an update of the most important features and application of formats and devices employed in solid phase extraction (SPE). Special attention was paid on new trapping media proposed in SPE prior the chromatography analysis, based on the use of nanostructured materials, including carbon nanomaterials, electrospun nanofibers, dendrimes and magnetic nanoparticles, molecular recognition sorbents, as aptamers, immunosorbents, molecular imprinted polymers, ion imprinting polymers, metal-organic frameworks and restricted access materials. Discussions on the present limitations as well as expected future trends of the new trapping media in sample preparation for the improvement of the analytical determinations were made. Moreover, application of SPE for the extraction of different kind of materials; such as biological, environmental, pharmaceutical and food samples was summarized.

The European commission

Abstract: 2 1 The innovative transport systems and the CityMobil project 10 1.1 The research questions 10 2 The state of art in the field of automatic transport systems 12 2.1 Case studies and demand studies for innovative transport systems 12 3 The design and implementation of surveys 14 3.1 Definition of experimental design 14 3.2 Questionnaire design and delivery 16 3.3 First analyses on the collected sample 18 4 Calibration of Logit Multionomial demand models 21 4.1 Methodology 21 4.2 Calibration of the “full” model. 22 4.3 Calibration of the “final” model 24 4.4 The demand analysis through the final Multinomial Logit model 25 5 The analysis of interaction between the demand and socioeconomic attributes 31 5.1 Methodology 31 5.2 Application of Mixed Logit models to the demand 31 5.3 Analysis of the interactions between demand and socioeconomic attributes through Mixed Logit models 32 5.4 Mixed Logit model and interaction between age and the demand for the CTS 38 5.5 Demand analysis with Mixed Logit model 39 6 Final analyses and conclusions 45 6.1 Comparison between the results of the analyses 45 6.2 Conclusions 48 6.3 Answers to the research questions and future developments 52