Showing papers by "Jack R. Vinson published in 1999"

The Behavior of Sandwich Structures of Isotropic and Composite Materials

Abstract: SANDWICH STRUCTURES: ORIGINS, ADVANTAGES, AND USES Description of Various Sandwich Constructions Advantages of Sandwich Construction over Construction Monocoque Thin Walled Construction Origins of Sandwich Construction Uses of Sandwich Construction Present Approach to Analysis Problems References ANISTROPIC ELASTICITY AND COMPOSITE LAMINATE THEORY Introduction Derivation of the Anisotropic Elastic Stiffness and Compliance Matrices The Physical Meaning of the Components of the Orthotropic Elasticity Tensor Methods to Obtain Composite Elastic Properties from Fiber and Matrix Properties Thermal and Hygrothermal Considerations Time-Temperature Effects on Composite Materials High Strain Rate Effects on Material Properties Laminae of Composite Materials Laminate Analysis [A], [B], and [D] Stiffness Matrices for a Mid-Plane Symmetric Sandwich Structure Piezoelectric Effects Problems References DERIVATION OF THE GOVERNING EQUATIONS FOR SANDWICH PLATES (PANELS) Introduction Plate Equilibrium Equations The Bending of Composite Material Laminated and/or Sandwich Plates: Classical Theory Classical Plate Theory Boundary Conditions Analysis of Composite Materials Laminated and/or Sandwich Panels Including Transverse Shear Deformation Effects Boundary Conditions for a Plate Using the Refined Plate Theory Laminated or Sandwich Plate on an Elastic Foundation Laminated or Sandwich Plates Subjected to Dynamic Loads Problems References BEAMS, COLUMNS, AND RODS OF COMPOSITE MATERIALS Development of Classical Beam Theory Some Simplified Sandwich-Beam Solutions Eigenvalue Problems of Sandwich Beams: Natural Vibrations and Elastic Stability Other Considerations Problems References ENERGY METHODS FOR SANDWICH STRUCTURES Introduction Theorem of Minimum Potential Energy Analysis of a Beam in Bending Using the Theorem of Minimum Potential Energy Reissner's Variational Theorem and Its Applications Static Deformation of Moderately Thick Beams Flexural Vibrations of Moderately Thick Beams Flexural Natural Frequencies of a Simply Supported Beam Including Transverse Shear Deformation and Rotatory Inertia Effects Minimum Potential Energy for Rectangular Plates A Rectangular Composite Material Plate Subjected to Lateral and Hygrothermal Loads In-Plane Shear Strength Determination of Composite Materials in Laminated and Sandwich Panels Problems References SOLUTIONS FOR RECTANGULAR SANDWICH PLATES Introduction Navier Solutions for Rectangular Sandwich Plates Levy Solutions for Plates of Composite Materials Perturbation Solutions for the Bending of a Composite Material Sandwich Plate, with Mid-Plane Symmetry and No Bending-Twisting Coupling Isotropic Sandwich Panels Subjected to a Uniform Lateral Load Minimum Weight Optimization for a Sandwich Panel Subjected to a Distributed Lateral Load Analysis of an Isotropic Sandwich Plate on an Elastic Foundation Subjected to a Uniform Lateral Load Static Analysis of Sandwich Plates of Composite Materials Including Transverse Shear Deformation Effects Exact Solution Other Considerations Problems References DYNAMIC EFFECTS ON SANDWICH PANELS Introduction Natural Flexural Vibrations of Sandwich Plates: Classical Theory Natural Flexural Vibrations of Sandwich Plates Including Transverse Shear Deformation Effects Forced-Vibration Response of a Sandwich Plate Subjected to a Dynamic Lateral Load Dynamic Response of Sandwich Plates to Localized Loads Large Amplitude Nonlinear Oscillations of Sandwich Plates Simply Supported on All Edges Linear and Nonlinear Oscillations of Specially Orthotropic Sandwich Panels with Various Boundary Conditions Vibration Damping Problems References THERMAL AND MOISTURE EFFECTS ON SANDWICH STRUCTURES General Considerations Derivation of the Governing Equations for a Thermoplastic Isotropic Plate Boundary Conditions General Treatment of Plate Nonhomogeneous Boundary Conditions Thermoelastic Effects on Beams Self-Equilibrium of Thermal Stress Rectangular Composite Material Plate Subjected to Lateral and Hygrothermal Loads References ELASTIC INSTABILITY (BUCKLING) OF SANDWICH PANELS General Considerations The Buckling of an Orthotropic Sandwich Plate Subjected to In-Plane Loads Classical Theory Elastic Stability of a Composite Sandwich Panel Including Transverse Shear Deformation and Hygrothermal Effects The Buckling of an Isotropic Plate on an Elastic Foundation Subjected to Biaxial In-Plane Compressive Loads The Buckling of Honeycomb Core Sandwich Panels Subjected to In-Plane Compressive Loads The Buckling of Solid- or Foam-Core Sandwich Panels Subjected to In-Plane Compressive Loads Buckling of a Truss-Core Sandwich Panel Subjected to Uniaxial Compression Elastic Stability of a Web-Core Sandwich Panel Subjected to a Uniaxial Compressive In-Plane Load Buckling of Honeycomb-Core Sandwich Panels Subjected to In-Plane Shear Loads Buckling of Solid-Core or Foam-Sandwich Panel Subjected to In-Plane Shear Loads Buckling of a Truss-Core Sandwich Panel Subjected to In-Plane Shear Loads Buckling of a Web-Core Sandwich Panel Subjected to an In-Plane Shear Load Other Considerations Problems References STRUCTURAL OPTIMIZATION TO OBTAIN MINIMUM-WEIGHT SANDWICH PANELS Introduction Minimum Weight Optimization of Honeycomb-Core Sandwich Panels Subjected to a Unidirectional Compressive Load Minimum Weight Optimization of Foam-Core Sandwich Panels Subjected to a Unidirectional Compressive Load Minimum Weight Optimization of Truss-Core Sandwich Panels Subjected to a Unidirectional Compressive Load Minimum Weight Optimization of Web-Core Sandwich Panels Subjected to a Unidirectional Compressive Load Minimum Weight Optimization of Honeycomb-Core Sandwich Panels Subjected to In-Plane Shear Loads Minimum Weight Optimization of Solid- and Foam-Core Sandwich Panels Subjected to In-Plane Shear Loads Minimum Weight Optimization of Truss-Core Sandwich Panels Subjected to In-Plane Shear Loads Minimum Weight Optimization of Web-Core Sandwich Panels Subjected to In-Plane Shear Loads Optimal Stacking Sequences for Composite Material Laminate Faces for Various Sandwich Panels Subjected to Various Loads Problems References SANDWICH SHELLS Introduction Analysis of Sandwich Cylindrical Shells under Axially Symmetric Loads A General Solution for Orthotropic-Sandwich Cylindrical Shells under Axially Symmetric Loads Shells with Mid-Plane Asymmetry Other Considerations Problems References BUCKLING OF SANDWICH CYLINDRICAL SHELLS Buckling of a Solid- or Foam-Core Sandwich Cylindrical Shell with Isotropic Faces Subjected to an Axially Symmetric Compressive End Load Buckling of a Solid- or Foam-Core Sandwich Cylindrical Shell with Orthotropic Composite Faces Subjected to an Axially Symmetric Compressive Load Buckling of a Honeycomb-Core Sandwich Cylindrical Shell with Composite Faces Subjected to an Axially Symmetric Compressive End Load Overall Buckling of Sandwich Cylindrical Shells Subjected to an Overall Bending Moment Buckling of a Sandwich Cylindrical Shell Due to External Pressure Buckling of a Sandwich Cylindrical Shell Due to Torsion Dynamic Buckling Problems References MINIMUM WEIGHT OPTIMIZATION OF SANDWICH CYLINDRICAL SHELLS General Discussion Minimum Weight Optimization of a Solid Foam-Core Sandwich Cylindrical Shell with Isotropic Faces Subjected to an Axially Compressive Load Minimum Weight Optimization of a Solid- or Foam-Core Sandwich Cylindrical Shell with Orthotropic Composite Material Faces Subjected to an Axially Compressive Load Minimum Weight Optimization of a Honeycomb-Core Sandwich Cylindrical Shell with Composite Material Faces Subjected to an Axially Symmetric Compressive Load Problems References APPENDIX 1: Core Materials APPENDIX 2: Face Materials APPENDIX 3: American Society for Testing Materials (ASTM) Standards for Sandwich Structures and Materials INDEX

Specimen Geometry Effects on High-Strain-Rate Testing of Graphite/Epoxy Composites

Abstract: Numerous papers have been published that include high-strain-rate experimental data obtained from Split Hopkinson Pressure Bar (SHPB) tests. There have been no standardized test specimens with differing dimensions and geometry. For this reason, it can be difficult to compare results of tests performed by other researchers. The SHPB facility was used in this study to determine if specimen geometry has an effect on the results of high-strain-rate compression tests. The material used in all of the tests is a unidirectional IM7/8551-7 graphite/epoxy composite. The experiments discussed herein show the effect of varying the length-to-diameter (L/D, or aspect) ratio of the specimen, as well as the effect of changing from the more typical cylindrical to a square/rectangular specimen geometry. The L/D study examined 84 cylindrical specimens with L/Ds from 0.5 to 2.0, with D = 0.261 in., and tested in both the 1 and 2 directions. The geometry study used 42 square/rectangular specimens and tested in the 1, 2, and 3 directions. The results of both studies are compared, and no statistically significant effect of either L/D or geometry could be found.