Jacques Albert

Bio: Jacques Albert is an academic researcher from Carleton University. The author has contributed to research in topics: Fiber Bragg grating & Optical fiber. The author has an hindex of 50, co-authored 332 publications receiving 9834 citations. Previous affiliations of Jacques Albert include Alcatel-Lucent & McGill University.

Bragg gratings fabricated in monomode photosensitive optical fiber by UV exposure through a phase mask

Abstract: A photolithographic method is described for fabricating refractive index Bragg gratings in photosensitive optical fiber by using a special phase mask grating made of silica glass. A KrF excimer laser beam (249 nm) at normal incidence is modulated spatially by the phase mask grating. The diffracted light, which forms a periodic, high‐contrast intensity pattern with half the phase mask grating pitch, photoimprints a refractive index modulation into the core of photosensitive fiber placed behind, in proximity, and parallel, to the mask; the phase mask grating striations are oriented normal to the fiber axis. This method of fabricating in‐fiber Bragg gratings is flexible, simple to use, results in reduced mechanical sensitivity of the grating writing apparatus and is functional even with low spatial and temporal coherence laser sources.

Tilted fiber Bragg grating sensors

Abstract: Optical fiber gratings have developed into a mature technology with a wide range of applications in various areas, including physical sensing for temperature, strain, acoustic waves and pressure. All of these applications rely on the perturbation of the period or refractive index of a grating inscribed in the fiber core as a transducing mechanism between a quantity to be measured and the optical spectral response of the fiber grating. This paper presents a relatively recent variant of the fiber grating concept, whereby a small tilt of the grating fringes causes coupling of the optical power from the core mode into a multitude of cladding modes, each with its own wavevector and mode field shape. The main consequence of doing so is that the differential response of the modes can then be used to multiply the sensing modalities available for a single fiber grating and also to increase the sensor resolution by taking advantage of the large amount of data available. In particular, the temperature cross-sensitivity and power source fluctuation noise inherent in all fiber grating designs can be completely eliminated by referencing all the spectral measurements to the wavelength and power level of the core mode back-reflection. The mode resonances have a quality factor of 105, and they can be observed in reflection or transmission. A thorough review of experimental and theoretical results will show that tilted fiber Bragg gratings can be used for high resolution refractometry, surface plasmon resonance applications, and multiparameter physical sensing (strain, vibration, curvature, and temperature).

Review of plasmonic fiber optic biochemical sensors: improving the limit of detection.

Abstract: This paper presents a brief overview of the technologies used to implement surface plasmon resonance (SPR) effects into fiber-optic sensors for chemical and biochemical applications and a survey of results reported over the last ten years. The performance indicators that are relevant for such systems, such as refractometric sensitivity, operating wavelength, and figure of merit (FOM), are discussed and listed in table form. A list of experimental results with reported limits of detection (LOD) for proteins, toxins, viruses, DNA, bacteria, glucose, and various chemicals is also provided for the same time period. Configurations discussed include fiber-optic analogues of the Kretschmann–Raether prism SPR platforms, made from geometry-modified multimode and single-mode optical fibers (unclad, side-polished, tapered, and U-shaped), long period fiber gratings (LPFG), tilted fiber Bragg gratings (TFBG), and specialty fibers (plastic or polymer, microstructured, and photonic crystal fibers). Configurations involving the excitation of surface plasmon polaritons (SPP) on continuous thin metal layers as well as those involving localized SPR (LSPR) phenomena in nanoparticle metal coatings of gold, silver, and other metals at visible and near-infrared wavelengths are described and compared quantitatively.

Plasmon resonances in gold-coated tilted fiber Bragg gratings.

Abstract: The transmission spectrum of fiber Bragg gratings with gratings planes tilted at a small angle (2°-10°) relative to the fiber axis shows a large number of narrowband cladding mode resonances within a 100 nm wide spectrum. When a gold coating with a thickness between 10 and 30 nm is deposited on the fiber, the transmission spectrum shows anomalous features for values of the outside medium refractive index between 1.4211 and 1.4499. These features are shown to correspond to the excitation of surface plasmon resonances at the external surface of the gold film.

Chirped in-fiber Bragg gratings for compensation of optical-fiber dispersion.

Abstract: A linearly chirped in-fiber Bragg grating is reported that can compensate at 1549 nm for the dispersion [ approximately -19 ps/(nmkm)] of standard telecommunications optical fiber optimized for 1300-nm operation.

Fiber grating spectra

Abstract: In this paper, we describe the spectral characteristics that can be achieved in fiber reflection (Bragg) and transmission gratings. Both principles for understanding and tools for designing fiber gratings are emphasized. Examples are given to illustrate the wide variety of optical properties that are possible in fiber gratings. The types of gratings considered include uniform, apodized, chirped, discrete phase-shifted, and superstructure gratings; short-period and long-period gratings; symmetric and tilted gratings; and cladding-mode and radiation-mode coupling gratings.

Fiber Bragg grating technology fundamentals and overview

Abstract: The historical beginnings of photosensitivity and fiber Bragg grating (FBG) technology are recounted. The basic techniques for fiber grating fabrication, their characteristics, and the fundamental properties of fiber gratings are described. The many applications of fiber grating technology are tabulated, and some selected applications are briefly described.

Flexible polymer transistors with high pressure sensitivity for application in electronic skin and health monitoring

Abstract: Flexible pressure sensors are essential parts of an electronic skin to allow future biomedical prostheses and robots to naturally interact with humans and the environment. Mobile biomonitoring in long-term medical diagnostics is another attractive application for these sensors. Here we report the fabrication of flexible pressure-sensitive organic thin film transistors with a maximum sensitivity of 8.4 kPa(-1), a fast response time of 15,000 cycles and a low power consumption of <1 mW. The combination of a microstructured polydimethylsiloxane dielectric and the high-mobility semiconducting polyisoindigobithiophene-siloxane in a monolithic transistor design enabled us to operate the devices in the subthreshold regime, where the capacitance change upon compression of the dielectric is strongly amplified. We demonstrate that our sensors can be used for non-invasive, high fidelity, continuous radial artery pulse wave monitoring, which may lead to the use of flexible pressure sensors in mobile health monitoring and remote diagnostics in cardiovascular medicine.

In-fibre Bragg grating sensors

Abstract: In-fibre Bragg grating (FBG) sensors are one of the most exciting developments in the field of optical fibre sensors in recent years. Compared with conventional fibre-optic sensors, FBG sensors have a number of distinguishing advantages. Significant progress has been made in applications to strain and temperature measurements. FBG sensors prove to be one of the most promising candidates for fibre-optic smart structures. This article presents a comprehensive and systematic overview of FBG sensor technology regarding many aspects including sensing principles, properties, fabrication, interrogation and multiplexing of FBG sensors. It is anticipated that FBG sensor systems will be commercialized and widely applied in practice in the near future due to the maturity of economical production of FBGs and the availability of cost effective interrogation and multiplexing techniques.

Optically active oxygen-deficiency-related centers in amorphous silicon dioxide

Abstract: The spectroscopic properties, structure and interconversions of optically active oxygen-deficiency-related point defects in vitreous silica are reviewed. These defects, the E′-centers (oxygen vacancies with a trapped hole or 3-fold-coordinated silicons), different variants of diamagnetic `ODCs' (oxygen-deficiency centers), and their Ge-related analogs play a key role in the fiber-optic Bragg grating writing processes. The controversy surrounding the structural models for the Si- and Ge-related ODCs is discussed and the similarity between the bulk and surface point defects in silica is emphasized. The possible interconversion mechanisms between 2-fold-coordinated Si, neutral oxygen vacancies and E′-centers are discussed. The effects of glassy disorder have a profound effect on defect properties and interconversion processes in silica.