Jan Baeyens

Bio: Jan Baeyens is an academic researcher from University of Warwick. The author has contributed to research in topics: Thermal energy storage & Heat transfer. The author has an hindex of 5, co-authored 5 publications receiving 2044 citations. Previous affiliations of Jan Baeyens include Beijing University of Chemical Technology.

Reviewing the anaerobic digestion of food waste for biogas production

Abstract: The uncontrolled discharge of large amounts of food waste (FW) causes severe environmental pollution in many countries. Within different possible treatment routes, anaerobic digestion (AD) of FW into biogas, is a proven and effective solution for FW treatment and valorization. The present paper reviews the characteristics of FW, the principles of AD, the process parameters, and two approaches (pretreatment and co-digestion) for enhancing AD of food waste. Among the successive digestion reactions, hydrolysis is considered to be the rate-limiting step. To enhance the performance of AD, several physical, thermo-chemical, biological or combined pretreatments are reviewed. Moreover, a promising way for improving the performance of AD is the co-digestion of FW with other organic substrates, as confirmed by numerous studies, where a higher buffer capacity and an optimum nutrient balance enhance the biogas/methane yields of the co-digestion system.

Concentrated solar power plants: Review and design methodology

Abstract: Concentrated solar power plants (CSPs) are gaining increasing interest, mostly as parabolic trough collectors (PTC) or solar tower collectors (STC). Notwithstanding CSP benefits, the daily and monthly variation of the solar irradiation flux is a main drawback. Despite the approximate match between hours of the day where solar radiation and energy demand peak, CSPs experience short term variations on cloudy days and cannot provide energy during night hours unless incorporating thermal energy storage (TES) and/or backup systems (BS) to operate continuously. To determine the optimum design and operation of the CSP throughout the year, whilst defining the required TES and/or BS, an accurate estimation of the daily solar irradiation is needed. Local solar irradiation data are mostly only available as monthly averages, and a predictive conversion into hourly data and direct irradiation is needed to provide a more accurate input into the CSP design. The paper (i) briefly reviews CSP technologies and STC advantages; (ii) presents a methodology to predict hourly beam (direct) irradiation from available monthly averages, based upon combined previous literature findings and available meteorological data; (iii) illustrates predictions for different selected STC locations; and finally (iv) describes the use of the predictions in simulating the required plant configuration of an optimum STC. The methodology and results demonstrate the potential of CSPs in general, whilst also defining the design background of STC plants.

Review on research achievements of biogas from anaerobic digestion

Abstract: With the rising demand for renewable energy and environmental protection, anaerobic digestion of biogas technology has attracted considerable attention within the scientific community. This paper presents a comprehensive review of research achievements on anaerobic digestion developments for biogas production. The review includes a discussion of factors affecting efficiency (temperature, pH, C/N ratio, OLR and retention time), accelerants (greenery biomass, biological pure culture and inorganic additives), reactors (conventional anaerobic reactors, sludge retention reactors and anaerobic membrane reactors) and biogas AD processes (lignocellulose waste, municipal solid waste, food waste, livestock manure and waste activated sludge) based on substrate characteristics and discusses the application of each forementioned aspect. The factors affecting efficiency are crucial to anaerobic digestion, because they play a major role in biogas production and determine the metabolic conditions for microorganism growth. As an additive, an accelerant is not only regarded as a nutrient resource, but can also improve biodegradability. The focus of reactor design is the sufficient utilization of a substrate by changing the feeding method and enhancing the attachment to biomass. The optimal digestion process balances the optimal digest conditions with the cost-optimal input/output ratio. Additionally, establishment of theoretical and technological studies should emphasize practicality based on laboratory-scale experiments because further development of biogas plants would allow for a transition from household to medium- and large-scale projects; therefore, improving stability and efficiency are recommended for advancing AD research.

Concentrated solar power plants: Review and design methodology

Abstract: Concentrated solar power plants (CSPs) are gaining increasing interest, mostly as parabolic trough collectors (PTC) or solar tower collectors (STC). Notwithstanding CSP benefits, the daily and monthly variation of the solar irradiation flux is a main drawback. Despite the approximate match between hours of the day where solar radiation and energy demand peak, CSPs experience short term variations on cloudy days and cannot provide energy during night hours unless incorporating thermal energy storage (TES) and/or backup systems (BS) to operate continuously. To determine the optimum design and operation of the CSP throughout the year, whilst defining the required TES and/or BS, an accurate estimation of the daily solar irradiation is needed. Local solar irradiation data are mostly only available as monthly averages, and a predictive conversion into hourly data and direct irradiation is needed to provide a more accurate input into the CSP design. The paper (i) briefly reviews CSP technologies and STC advantages; (ii) presents a methodology to predict hourly beam (direct) irradiation from available monthly averages, based upon combined previous literature findings and available meteorological data; (iii) illustrates predictions for different selected STC locations; and finally (iv) describes the use of the predictions in simulating the required plant configuration of an optimum STC. The methodology and results demonstrate the potential of CSPs in general, whilst also defining the design background of STC plants.

A review on phase change material (PCM) for sustainable passive cooling in building envelopes

Abstract: The most significant threat that mankind faces in the 21th century is global warming. Buildings, which account for 40% of global energy consumption and greenhouse gas emissions, play a pivotal role in global warming. Estimates show that their destructive impact will grow by 1.8% per year through 2050, which indicates that future consumption and emissions will be worse than today. Therefore, the impact of cooling systems cannot be ignored, as they, along with ventilation and heating systems, account for 60% of the energy consumed in buildings. Passive cooling techniques are a promising alternative to conventional cooling systems. Of the various passive cooling strategies, thermal energy storage by means of latent heat is an efficient way to increase the thermal inertia of building envelopes, which would reduce temperature fluctuations, leading to the improved thermal comfort of occupants. Phase change materials (PCMs) with high density for thermal energy storage can be efficiently employed to this purpose. This paper reviews recent studies of the application of PCMs for passive cooling in buildings. From the literature, a comprehensive list of different organic, inorganic and eutectic PCMs appropriate for passive cooling in buildings are reviewed. Full-scale testing and numerical modeling were found to be the most popular investigative methods used for experimental and theoretical analysis of PCMs. The combination of these two methods can provide a detailed and valid technique for PCM investigations. Finally, incorporating PCMs into building walls with macro encapsulation was also a dominant interest in previous studies.