Jason H. Anderson

Bio: Jason H. Anderson is an academic researcher from University of Toronto. The author has contributed to research in topics: Field-programmable gate array & High-level synthesis. The author has an hindex of 35, co-authored 153 publications receiving 4728 citations. Previous affiliations of Jason H. Anderson include Fujitsu & Xilinx.

LegUp: high-level synthesis for FPGA-based processor/accelerator systems

Abstract: In this paper, we introduce a new open source high-level synthesis tool called LegUp that allows software techniques to be used for hardware design LegUp accepts a standard C program as input and automatically compiles the program to a hybrid architecture containing an FPGA-based MIPS soft processor and custom hardware accelerators that communicate through a standard bus interface Results show that the tool produces hardware solutions of comparable quality to a commercial high-level synthesis tool

A Survey and Evaluation of FPGA High-Level Synthesis Tools

Abstract: High-level synthesis (HLS) is increasingly popular for the design of high-performance and energy-efficient heterogeneous systems, shortening time-to-market and addressing today’s system complexity. HLS allows designers to work at a higher-level of abstraction by using a software program to specify the hardware functionality. Additionally, HLS is particularly interesting for designing field-programmable gate array circuits, where hardware implementations can be easily refined and replaced in the target device. Recent years have seen much activity in the HLS research community, with a plethora of HLS tool offerings, from both industry and academia. All these tools may have different input languages, perform different internal optimizations, and produce results of different quality, even for the very same input description. Hence, it is challenging to compare their performance and understand which is the best for the hardware to be implemented. We present a comprehensive analysis of recent HLS tools, as well as overview the areas of active interest in the HLS research community. We also present a first-published methodology to evaluate different HLS tools. We use our methodology to compare one commercial and three academic tools on a common set of C benchmarks, aiming at performing an in-depth evaluation in terms of performance and the use of resources.

VTR 7.0: Next Generation Architecture and CAD System for FPGAs

Abstract: Exploring architectures for large, modern FPGAs requires sophisticated software that can model and target hypothetical devices. Furthermore, research into new CAD algorithms often requires a complete and open source baseline CAD flow. This article describes recent advances in the open source Verilog-to-Routing (VTR) CAD flow that enable further research in these areas. VTR now supports designs with multiple clocks in both timing analysis and optimization. Hard adder/carry logic can be included in an architecture in various ways and significantly improves the performance of arithmetic circuits. The flow now models energy consumption, an increasingly important concern. The speed and quality of the packing algorithms have been significantly improved. VTR can now generate a netlist of the final post-routed circuit which enables detailed simulation of a design for a variety of purposes. We also release new FPGA architecture files and models that are much closer to modern commercial architectures, enabling more realistic experiments. Finally, we show that while this version of VTR supports new and complex features, it has a 1.5× compile time speed-up for simple architectures and a 6× speed-up for complex architectures compared to the previous release, with no degradation to timing or wire-length quality.

LegUp: An open-source high-level synthesis tool for FPGA-based processor/accelerator systems

Abstract: It is generally accepted that a custom hardware implementation of a set of computations will provide superior speed and energy efficiency relative to a software implementation. However, the cost and difficulty of hardware design is often prohibitive, and consequently, a software approach is used for most applications. In this article, we introduce a new high-level synthesis tool called LegUp that allows software techniques to be used for hardware design. LegUp accepts a standard C program as input and automatically compiles the program to a hybrid architecture containing an FPGA-based MIPS soft processor and custom hardware accelerators that communicate through a standard bus interface. In the hybrid processor/accelerator architecture, program segments that are unsuitable for hardware implementation can execute in software on the processor. LegUp can synthesize most of the C language to hardware, including fixed-sized multidimensional arrays, structs, global variables, and pointer arithmetic. Results show that the tool produces hardware solutions of comparable quality to a commercial high-level synthesis tool. We also give results demonstrating the ability of the tool to explore the hardware/software codesign space by varying the amount of a program that runs in software versus hardware. LegUp, along with a set of benchmark C programs, is open source and freely downloadable, providing a powerful platform that can be leveraged for new research on a wide range of high-level synthesis topics.

The VTR project: architecture and CAD for FPGAs from verilog to routing

Abstract: To facilitate the development of future FPGA architectures and CAD tools -- both embedded programmable fabrics and pure-play FPGAs -- there is a need for a large scale, publicly available software suite that can synthesize circuits into easily-described hypothetical FPGA architectures. These circuits should be captured at the HDL level, or higher, and pass through logical and physical synthesis. Such a tool must provide detailed modelling of area, performance and energy to enable architecture exploration. As software flows themselves evolve to permit design capture at ever higher levels of abstraction, this downstream full-implementation flow will always be required. This paper describes the current status and new release of an ongoing effort to create such a flow - the 'Verilog to Routing' (VTR) project, which is a broad collaboration of researchers. There are three core tools: ODIN II for Verilog Elaboration and front-end hard-block synthesis, ABC for logic synthesis, and VPR for physical synthesis and analysis. ODIN II now has a simulation capability to help verify that its output is correct, as well as specialized synthesis at the elaboration step for multipliers and memories. ABC is used to optimize the 'soft' logic of the FPGA. The VPR-based packing, placement and routing is now fully timing-driven (the previous release was not) and includes new capability to target complex logic blocks. In addition we have added a set of four large benchmark circuits to a suite of previously-released Verilog HDL circuits. Finally, we illustrate the use of the new flow by using it to help architect a floating-point unit in an FPGA, and contrast it with a prior, much longer effort that was required to do the same thing.

Occupational Outlook Handbook

Abstract: Give us 5 minutes and we will show you the best book to read today. This is it, the occupational outlook handbook that will be your best choice for better reading book. Your five times will not spend wasted by reading this website. You can take the book as a source to make better concept. Referring the books that can be situated with your needs is sometime difficult. But here, this is so easy. You can find the best thing of book that you can read.

Data Center Energy Consumption Modeling: A Survey

Abstract: Data centers are critical, energy-hungry infrastructures that run large-scale Internet-based services. Energy consumption models are pivotal in designing and optimizing energy-efficient operations to curb excessive energy consumption in data centers. In this paper, we survey the state-of-the-art techniques used for energy consumption modeling and prediction for data centers and their components. We conduct an in-depth study of the existing literature on data center power modeling, covering more than 200 models. We organize these models in a hierarchical structure with two main branches focusing on hardware-centric and software-centric power models. Under hardware-centric approaches we start from the digital circuit level and move on to describe higher-level energy consumption models at the hardware component level, server level, data center level, and finally systems of systems level. Under the software-centric approaches we investigate power models developed for operating systems, virtual machines and software applications. This systematic approach allows us to identify multiple issues prevalent in power modeling of different levels of data center systems, including: i) few modeling efforts targeted at power consumption of the entire data center ii) many state-of-the-art power models are based on a few CPU or server metrics, and iii) the effectiveness and accuracy of these power models remain open questions. Based on these observations, we conclude the survey by describing key challenges for future research on constructing effective and accurate data center power models.

Reconfigurable Computing: The Theory and Practice of FPGA-Based Computation

Abstract: The main characteristic of Reconfigurable Computing is the presence of hardware that can be reconfigured to implement specific functionality more suitable for specially tailored hardware than on a simple uniprocessor. Reconfigurable computing systems join microprocessors and programmable hardware in order to take advantage of the combined strengths of hardware and software and have been used in applications ranging from embedded systems to high performance computing. Many of the fundamental theories have been identified and used by the Hardware/Software Co-Design research field. Although the same background ideas are shared in both areas, they have different goals and use different approaches.This book is intended as an introduction to the entire range of issues important to reconfigurable computing, using FPGAs as the context, or "computing vehicles" to implement this powerful technology. It will take a reader with a background in the basics of digital design and software programming and provide them with the knowledge needed to be an effective designer or researcher in this rapidly evolving field. · Treatment of FPGAs as computing vehicles rather than glue-logic or ASIC substitutes · Views of FPGA programming beyond Verilog/VHDL · Broad set of case studies demonstrating how to use FPGAs in novel and efficient ways