Javier Garcia

Bio: Javier Garcia is an academic researcher from University of Valencia. The author has contributed to research in topics: Holography & Speckle pattern. The author has an hindex of 34, co-authored 233 publications receiving 4109 citations. Previous affiliations of Javier Garcia include Bar-Ilan University.

Synthetic aperture superresolution with multiple off-axis holograms.

Abstract: An optical setup to achieve superresolution in microscopy using holographic recording is presented. The technique is based on off-axis illumination of the object and a simple optical image processing stage after the imaging system for the interferometric recording process. The superresolution effect can be obtained either in one step by combining a spatial multiplexing process and an incoherent addition of different holograms or it can be implemented sequentially. Each hologram holds the information of each different frequency bandpass of the object spectrum. We have optically implemented the approach for a low-numerical-aperture commercial microscope objective. The system is simple and robust because the holographic interferometric recording setup is done after the imaging lens.

Simultaneous remote extraction of multiple speech sources and heart beats from secondary speckles pattern.

Abstract: The ability of dynamic extraction of remote sounds is very appealing. In this manuscript we propose an optical approach allowing the extraction and the separation of remote sound sources. The approach is very modular and it does not apply any constraints regarding the relative position of the sound sources and the detection device. The optical setup doing the detection is very simple and versatile. The principle is to observe the movement of the secondary speckle patterns that are generated on top of the target when it is illuminated by a spot of laser beam. Proper adaption of the imaging optics allows following the temporal trajectories of those speckles and extracting the sound signals out of the processed trajectory. Various sound sources are imaged in different spatial pixels and thus blind source separation becomes a very simple task.

Fractional wavelet transform.

Abstract: The wavelet transform, which has had a growing importance in signal and image processing, has been generalized by association with both the wavelet transform and the fractional Fourier transform. Possible implementations of the new transformation are in image compression, image transmission, transient signal processing, etc. Computer simulations demonstrate the abilities of the novel transform. Optical implementation of this transform is briefly discussed.

Superresolution digital holographic microscopy for three-dimensional samples

Abstract: An approach that allows superresolution imaging of three-dimensional (3-D) samples by numerical refocusing is presented in the field of digital holographic microscopy. Based on the object’s spectrum shift produced by tilted illumination, we present a time multiplexing superresolved approach to overcome the Abbe’s diffraction limit. The proposed approach uses a microscope in a Mach-Zehnder interferometric architecture with the particularity that the output plane does not coincide with the image plane. Thus, a set of off-axis non-image plane holograms are sequentially recorded for every tilted beam used in the illumination stage. After that and by using simple digital post-processing and numerical reconstruction, a 3-D superresolved sample volume is reconstructed slice-by-slice in terms of the definition of a synthetic aperture (SA) that expands the cutoff frequency of the microscope lens. Experimental results showing the capabilities of the proposed approach are presented.

Fourier-transform method of fringe-pattern analysis for computer-based topography and interferometry

Abstract: A fast-Fourier-transform method of topography and interferometry is proposed. By computer processing of a noncontour type of fringe pattern, automatic discrimination is achieved between elevation and depression of the object or wave-front form, which has not been possible by the fringe-contour-generation techniques. The method has advantages over moire topography and conventional fringe-contour interferometry in both accuracy and sensitivity. Unlike fringe-scanning techniques, the method is easy to apply because it uses no moving components.

Wide-field, high-resolution Fourier ptychographic microscopy

Abstract: We report an imaging method, termed Fourier ptychographic microscopy (FPM), which iteratively stitches together a number of variably illuminated, low-resolution intensity images in Fourier space to produce a wide-field, high-resolution complex sample image. By adopting a wavefront correction strategy, the FPM method can also correct for aberrations and digitally extend a microscope’s depth of focus beyond the physical limitations of its optics. As a demonstration, we built a microscope prototype with a resolution of 0.78 µm, a field of view of ∼120 mm^2 and a resolution-invariant depth of focus of 0.3 mm (characterized at 632 nm). Gigapixel colour images of histology slides verify successful FPM operation. The reported imaging procedure transforms the general challenge of high-throughput, high-resolution microscopy from one that is coupled to the physical limitations of the system’s optics to one that is solvable through computation.

Digital wavefront measuring interferometer for testing optical surfaces and lenses

Abstract: A self-scanned 1024 element photodiode array and minicomputer are used to measure the phase (wavefront) in the interference pattern of an interferometer to lambda/100. The photodiode array samples intensities over a 32 x 32 matrix in the interference pattern as the length of the reference arm is varied piezoelectrically. Using these data the minicomputer synchronously detects the phase at each of the 1024 points by a Fourier series method and displays the wavefront in contour and perspective plot on a storage oscilloscope in less than 1 min (Bruning et al. Paper WE16, OSA Annual Meeting, Oct. 1972). The array of intensities is sampled and averaged many times in a random fashion so that the effects of air turbulence, vibrations, and thermal drifts are minimized. Very significant is the fact that wavefront errors in the interferometer are easily determined and may be automatically subtracted from current or subsequent wavefrots. Various programs supporting the measurement system include software for determining the aperture boundary, sum and difference of wavefronts, removal or insertion of tilt and focus errors, and routines for spatial manipulation of wavefronts. FFT programs transform wavefront data into point spread function and modulus and phase of the optical transfer function of lenses. Display programs plot these functions in contour and perspective. The system has been designed to optimize the collection of data to give higher than usual accuracy in measuring the individual elements and final performance of assembled diffraction limited optical systems, and furthermore, the short loop time of a few minutes makes the system an attractive alternative to constraints imposed by test glasses in the optical shop.

Progress in optics

Abstract: Have you ever felt that the very title, Progress in Optics, conjured an image in your mind? Don’t you see a row of handsomely printed books, bearing the editorial stamp of one of the most brilliant members of the optics community, and chronicling the field of optics since the invention of the laser? If so, you are certain to move the bookend to make room for Volume 16, the latest of this series. It contains seven chapters on widely diverging topics, written by well-known authorities in their fields. These are: 1) Laser Selective Photophysics and Photochemistry by V. S. Letokhov, 2) Recent Advances in Phase Profiles (sic) Generation by J. J. Clair and C. I. Abitbol, 3 ) Computer-Generated Holograms: Techniques and Applications by W.-H. Lee, 4) Speckle Interferometry by A. E. Ennos, 5 ) Deformation Invariant, Space-Variant Optical Pattern Recognition by D. Casasent and D. Psaltis, 6) Light Emission from High-Current Surface-Spark Discharges by R. E. Beverly, and 7) Semiclassical Radiation Theory within a QuantumMechanical Framework by I. R. Senitzkt. The breadth of topic matter spanned by these chapters makes it impossible, for this reviewer at least, to pass judgement on the comprehensiveness, relevance, and completeness of every chapter. With an editorial board as prominent as that of Progress in Optics, however, it seems hardly likely that such comments should be necessary. It should certainly be possible to take the authority of each author as credible. The only remaining judgment to be made on these chapters is their readability. In short, what are they like to read? The first sentence of the first chapter greets the eye with an obvious typographical error: “The creation of coherent laser light source, that have tunable radiation, opened the . . . .” Two pages later we find: “When two types of atoms or molecules of different isotopic composition ( A and B ) have even one spectral line that does not overlap with others, it is pos-

Quantitative phase imaging in biomedicine

Abstract: Quantitative phase imaging (QPI) has emerged as a valuable method for investigating cells and tissues. QPI operates on unlabelled specimens and, as such, is complementary to established fluorescence microscopy, exhibiting lower phototoxicity and no photobleaching. As the images represent quantitative maps of optical path length delays introduced by the specimen, QPI provides an objective measure of morphology and dynamics, free of variability due to contrast agents. Owing to the tremendous progress witnessed especially in the past 10–15 years, a number of technologies have become sufficiently reliable and translated to biomedical laboratories. Commercialization efforts are under way and, as a result, the QPI field is now transitioning from a technology-development-driven to an application-focused field. In this Review, we aim to provide a critical and objective overview of this dynamic research field by presenting the scientific context, main principles of operation and current biomedical applications. Over the past 10–15 years, quantitative phase imaging has moved from a research-driven to an application-focused field. This Review presents the main principles of operation and representative basic and clinical science applications.