Jean-Pierre Raskin

Bio: Jean-Pierre Raskin is an academic researcher from Université catholique de Louvain. The author has contributed to research in topics: Silicon on insulator & MOSFET. The author has an hindex of 48, co-authored 643 publications receiving 9819 citations. Previous affiliations of Jean-Pierre Raskin include University College London & Katholieke Universiteit Leuven.

Substrate crosstalk reduction using SOI technology

Abstract: This work analyzes both by simulations and measurements the substrate crosstalk performances of various Silicon-On-Insulator (SOI) technologies, and compares them to those of normal bulk CMOS process. The influence of various parameters, such as substrate resistivity, buried oxide thickness and distance between devices, is investigated. The use of capacitive guard rings is proposed, and their effectiveness is demonstrated. A simple RC model has been developed to allow a deep understanding of these phenomena as well as to simplify future studies of more complex systems. The superiority of high-resistivity SIMOX substrates over standard SOI and bulk is finally demonstrated.

Influence of device engineering on the analog and RF performances of SOI MOSFETs

Abstract: This work presents a systematic comparative study of the influence of various process options on the analog and RF properties of fully depleted (FD) silicon-on-insulator (SOI), partially depleted (PD) SOI, and bulk MOSFET's with gate lengths down to 0.08 /spl mu/m. We introduce the transconductance-over-drain current ratio and Early voltage as key figures of merits for the analog MOS performance and the gain and the transition and maximum frequencies for RF performances and link them to device engineering. Specifically, we investigate the effects of HALO implantation in FD, PD, and bulk devices, of film thickness in FD, of substrate doping in SOI, and of nonstandard channel engineering (i.e., asymmetric Graded-channel MOSFETs and gate-body contacted DTMOS).

New substrate passivation method dedicated to HR SOI wafer fabrication with increased substrate resistivity

Abstract: We propose in this letter a new passivation method to get rid of parasitic surface conduction in oxidized high resistivity (HR) silicon and HR silicon-on-insulator (SOI) wafers. The method consists in passivating the HR substrate with a rapid thermal anneal (RTA)-crystallized layer of silicon. The electrical efficiency of this new passivation technique is analyzed and shown to be superior over previously published methods. The surface roughness as well as the stability over temperature of this layer are also investigated. It is shown that this new passivation method is the only one simultaneously combining a low surface roughness and a high stability over long thermal anneals. In the context of SOI technology, it therefore appears as the most suitable technique for the substrate passivation of HR SOI wafers, for which a bonding between an oxidized silicon wafer and a passivated HR substrate is required.

Accurate SOI MOSFET characterization at microwave frequencies for device performance optimization and analog modeling

Abstract: The maturation of low-cost silicon-on-insulator (SOI) MOSFET technology in the microwave domain has brought about a need to develop specific characterization techniques. An original scheme is presented, which, by combining careful design of probing and calibration structures, rigorous in situ calibration, and a new powerful direct extraction method, allows reliable identification of the parameters of the non-quasi-static (NQS) small-signal model for MOSFETs. The extracted model is shown to be valid up to 40 GHz.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Phd by thesis

Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Introduction to the Finite Element Method

Abstract: This chapter introduces the finite element method (FEM) as a tool for solution of classical electromagnetic problems. Although we discuss the main points in the application of the finite element method to electromagnetic design, including formulation and implementation, those who seek deeper understanding of the finite element method should consult some of the works listed in the bibliography section.