scispace - formally typeset
Search or ask a question
Author

Jeffrey S. Zabinski

Bio: Jeffrey S. Zabinski is an academic researcher from Wright-Patterson Air Force Base. The author has contributed to research in topics: Pulsed laser deposition & Thin film. The author has an hindex of 49, co-authored 144 publications receiving 7895 citations. Previous affiliations of Jeffrey S. Zabinski include Air Force Research Laboratory & United States Army Research Laboratory.


Papers
More filters
Journal ArticleDOI
TL;DR: The chameleon's ability to change skin color depending on environment to increase its chances of surviving served as an inspiration in the development of self-adaptive supertough wear-resistant coatings as mentioned in this paper.

446 citations

Journal ArticleDOI
TL;DR: In this paper, a chameleon tribological coating concept was developed to address the challenge of degradation of lubricants and excessive wear in space-terrestrial environments. But, this approach relies on the coating to change its surface (both chemistry and structure) to self-adjust to the environment and thus achieve long durability.

326 citations

Journal ArticleDOI
TL;DR: In this paper, phase transitions between adhesive metal, load supporting carbide, and wear-resistant diamond-like carbon (DLC) surfaces were investigated on the Ti-C system prepared by a hybrid of magnetron sputtering and pulsed laser deposition.

300 citations

Journal ArticleDOI
TL;DR: In this article, a hybrid of magnetron sputtering and pulsed laser deposition is described for nanocomposite coatings made of carbide, diamond-like carbon (DLC) and transition-metal dichalcogenide phases.
Abstract: Challenges in aerospace tribology and composite coatings for aerospace applications are briefly reviewed. Attention is given to nanocomposite coatings made of carbide, diamond-like carbon (DLC) and transition-metal dichalcogenide phases. The preparation of such coatings within the W–C–S material system using a hybrid of magnetron sputtering and pulsed laser deposition is described. Coatings consist of 1–2 nm WC and 5–10 nm WS2 grains embedded in an amorphous DLC matrix. These WC/DLC/WS2 nanocomposites demonstrate low friction and wear in tests performed in high vacuum, dry nitrogen and humid air. Coatings are found to adapt to the test conditions, which results in: (1) crystallization and reorientation of initially nanocrystalline and randomly oriented WS2 grains; (2) graphitization of the initially amorphous DLC matrix; (3) reversible regulation of the composition of the transfer film between WS2 and graphite with environmental cycling from dry to humid; and (4) possible DLC/WS2 synergistic effects, providing friction reduction in oxidizing environments. These adaptive mechanisms achieve low friction coefficients of 0.02–0.05 and an endurance above two million cycles in space simulation tests. This also provides stable coating performance and recovery of low friction in tests simulating ambient/space environmental cycling. Correlations among WC/DLC/WS2 chemistry, structure, hardness, friction and wear are discussed. The tremendous potential of such composites for aerospace tribology is demonstrated.

277 citations

Journal ArticleDOI
TL;DR: In this paper, structural transformations in the sliding friction of hydrogen-free diamond-like carbon (DLC) films prepared by pulsed laser deposition are investigated, and the low friction is related to a friction induced transformation of the surface into a graphite-like phase and the formation of an adherent transfer film of this material on the counterface.

248 citations


Cited by
More filters
Journal ArticleDOI

3,711 citations

Journal ArticleDOI
TL;DR: An overview of the key aspects of graphene and related materials, ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries are provided.
Abstract: We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

2,560 citations

Journal ArticleDOI
TL;DR: The physical and chemical fundamentals of plasma electrolysis are discussed in this article, and the equipment and deposition procedures for coating production are described, and the effects of electrolyte composition and temperature on ignition voltage, discharge intensity and deposited layer thickness and composition are outlined.
Abstract: This paper overviews the relatively new surface engineering discipline of plasma electrolysis, the main derivative of this being plasma electrolytic deposition (PED), which includes techniques such as plasma electrolytic oxidation (PEO) and plasma electrolytic saturation (PES) processes such as plasma electrolytic nitriding/carburizing (PEN/PEC). In PED technology, spark or arc plasma micro-discharges in an aqueous solution are utilised to ionise gaseous media from the solution such that complex compounds are synthesised on the metal surface through the plasma chemical interactions. The physical and chemical fundamentals of plasma electrolysis are discussed here. The equipment and deposition procedures for coating production are described, and the effects of electrolyte composition and temperature on ignition voltage, discharge intensity and deposited layer thickness and composition are outlined. AC-pulse PEO treatment of aluminium in a suitable passivating electrolyte allows the formation of relatively thick (up to 500 μm) and hard (up to 23 GPa) surface layers with excellent adhesion to the substrate. A 10–20 μm thick surface compound layer (1200HV) and 200–300 μm inner diffusion layer with very good mechanical and corrosion-resistant properties can also be formed on steel substrates in only 3–5 min by use of the PEN/PEC saturation techniques. Details are given of the basic operational characteristics of the various techniques, and the physical, mechanical and tribological characteristics of coatings produced by plasma electrolytic treatments are presented.

2,552 citations

Journal ArticleDOI
TL;DR: In this paper, the authors review the present understanding of film growth processes and their role in microstructural evolution as a function of deposition variables including temperature, the presence of reactive species, and the use of low-energy ion irradiation during growth.
Abstract: Atomic-scale control and manipulation of the microstructure of polycrystalline thin films during kinetically limited low-temperature deposition, crucial for a broad range of industrial applications, has been a leading goal of materials science during the past decades. Here, we review the present understanding of film growth processes—nucleation, coalescence, competitive grain growth, and recrystallization—and their role in microstructural evolution as a function of deposition variables including temperature, the presence of reactive species, and the use of low-energy ion irradiation during growth.

1,499 citations

Journal ArticleDOI
TL;DR: This review aims to provide a summary on the liquid-phase synthesis, modifications, and energy-related applications of nanostructured metal chalcogenide (MC) materials and remarks on the challenges and perspectives for future MC research are proposed.
Abstract: Advanced energy conversion and storage (ECS) devices (including fuel cells, photoelectrochemical water splitting cells, solar cells, Li-ion batteries and supercapacitors) are expected to play a major role in the development of sustainable technologies that alleviate the energy and environmental challenges we are currently facing. The successful utilization of ECS devices depends critically on synthesizing new nanomaterials with merits of low cost, high efficiency, and outstanding properties. Recent progress has demonstrated that nanostructured metal chalcogenides (MCs) are very promising candidates for efficient ECS systems based on their unique physical and chemical properties, such as conductivity, mechanical and thermal stability and cyclability. In this review, we aim to provide a summary on the liquid-phase synthesis, modifications, and energy-related applications of nanostructured metal chalcogenide (MC) materials. The liquid-phase syntheses of various MC nanomaterials are primarily categorized with the preparation method (mainly 15 kinds of methods). To obtain optimized, enhanced or even new properties, the nanostructured MC materials can be modified by other functional nanomaterials such as carbon-based materials, noble metals, metal oxides, or MCs themselves. Thus, this review will then be focused on the recent strategies used to realize the modifications of MC nanomaterials. After that, the ECS applications of the MC/modified-MC nanomaterials have been systematically summarized based on a great number of successful cases. Moreover, remarks on the challenges and perspectives for future MC research are proposed (403 references).

1,318 citations