Jiajia Chen

Bio: Jiajia Chen is an academic researcher from Royal Institute of Technology. The author has contributed to research in topics: Passive optical network & Wavelength-division multiplexing. The author has an hindex of 8, co-authored 24 publications receiving 221 citations.

Nonlinearity-aware 200 Gbit/s DMT transmission for C-band short-reach optical interconnects with a single packaged electro-absorption modulated laser

Abstract: We experimentally demonstrate the transmission of a 200 Gbit/s discrete multitone (DMT) at the soft forward error correction limit in an intensity-modulation direct-detection system with a single C-band packaged distributed feedback laser and traveling-wave electro absorption modulator (DFB-TWEAM), digital-to-analog converter and photodiode. The bit-power loaded DMT signal is transmitted over 1.6 km standard single-mode fiber with a net rate of 166.7 Gbit/s, achieving an effective electrical spectrum efficiency of 4.93 bit/s/Hz. Meanwhile, net rates of 174.2 Gbit/s and 179.5 Gbit/s are also demonstrated over 0.8 km SSMF and in an optical back-to-back case, respectively. The feature of the packaged DFB-TWEAM is presented. The nonlinearity-aware digital signal processing algorithm for channel equalization is mathematically described, which improves the signal-to-noise ratio up to 3.5 dB.

Digital mobile fronthaul employing differential pulse code modulation with suppressed quantization noise.

Abstract: A differential pulse code modulation (DPCM) based digital mobile fronthaul architecture is proposed and experimentally demonstrated. By using a linear predictor in the DPCM encoding process, the quantization noise can be effectively suppressed and a prediction gain of 7~8 dB can be obtained. Experimental validation is carried out with a 20 km 15-Gbaud/λ 4-level pulse amplitude modulation (PAM4) intensity modulation and direct detection system. The results verify the feasibility of supporting 163, 122, 98, 81 20-MHz 4, 16, 64, 256 QAM based antenna-carrier (AxC) containers with only 3, 4, 5, 6 quantization bits at a sampling rate of 30.72MSa/s in LTE-A environment. Further increasing the number of quantization bits to 8 and 9, 1024 quadrature amplitude modulation (1024 QAM) and 4096 QAM transmission can be realized with error vector magnitude (EVM) lower than 1% and 0.5%, respectively. The supported number of AxCs in the proposed DPCM-based fronthaul is increased and the EVM is greatly reduced compared to the common public radio interface (CPRI) based fronthaul that uses pulse code modulation. Besides, the DPCM-based fronthaul is also experimentally demonstrated to support universal filtered multicarrier signal that is one candidate waveform for the 5th generation mobile systems.

Spectrally efficient digitized radio-over-fiber system with k-means clustering-based multidimensional quantization.

Abstract: We propose a spectrally efficient digitized radio-over-fiber (D-RoF) system by grouping highly correlated neighboring samples of the analog signals into multidimensional vectors, where the k-means clustering algorithm is adopted for adaptive quantization. A 30 Gbit/s D-RoF system is experimentally demonstrated to validate the proposed scheme, reporting a carrier aggregation of up to 40 100 MHz orthogonal frequency division multiplexing (OFDM) channels with quadrate amplitude modulation (QAM) order of 4 and an aggregation of 10 100 MHz OFDM channels with a QAM order of 16384. The equivalent common public radio interface rates from 37 to 150 Gbit/s are supported. Besides, the error vector magnitude (EVM) of 8% is achieved with the number of quantization bits of 4, and the EVM can be further reduced to 1% by increasing the number of quantization bits to 7. Compared with conventional pulse coding modulation-based D-RoF systems, the proposed D-RoF system improves the signal-to-noise-ratio up to ∼9 dB and greatly reduces the EVM, given the same number of quantization bits.

Protection cost evaluation of two WDM-based Next Generation Optical Access Networks

Abstract: In this paper, we investigate the capital and operational expenditures for two next generation optical access (NGOA) networks based on wavelength division multiplexing (WDM) technology in dense urban areas. It is shown that with a proper fiber layout design, minor extra investment for protection of NGOA networks can make a significant saving on failure related operational cost.

7×100 Gbps PAM-4 Transmission over 1-km and 10-km Single Mode 7-core Fiber using 1.5-μm SM-VCSEL

Abstract: 100 Gbps/λ/core PAM-4 transmission is successfully demonstrated over 1-km and 10-km single mode 7-core fiber links, enabled by directly modulated 1.5-μm single mode VCSEL of 23 GHz modulation bandwidth with pre- and post-digital equalizations.

Analysis of polling systems

Abstract: A polling system is one that contains a number of queues served in cyclic order. It is employed in computer-terminal communication systems and implemented in such standard data link protocols as BSC, SDLC, and HDLC, and its analysis is now finding a new application in local-area computer networks.This monograph analyzes polling systems to evaluate such basic performance measures as the average queue length and waiting time. Following a taxonomy of models with reference to previous work, it considers one-message buffer systems and infinite buffer systems with exhaustive, gated, and limited service disciplines. Examples to which the analysis of polling systems is applied are drawn from the field of computer communication networks. Contents: Introduction. One-Message Buffer Systems. Exhaustive Service, Discrete-Time Systems. Exhaustive Service, Continuous-Time Systems. Gated Service Systems. Limited Service Systems. Systems with Zero Reply Intervals. Sample Applications. Future Research Topics. Summary of Important Results.Hideaki Takagi is with IBM Japan Science Institute in Tokyo. "Analysis of Polling Systems" is included in the Computer Systems Series, Research Reports and Notes, edited by Herb Schwetman.

200 Gbps/Lane IM/DD Technologies for Short Reach Optical Interconnects

Abstract: Client-side optics are facing an ever-increasing upgrading pace, driven by upcoming 5G related services and datacenter applications. The demand for a single lane data rate is soon approaching 200 Gbps. To meet such high-speed requirement, all segments of traditional intensity modulation direct detection (IM/DD) technologies are being challenged. The characteristics of electrical and optoelectronic components and the performance of modulation, coding, and digital signal processing (DSP) techniques are being stretched to their limits. In this context, we witnessed technological breakthroughs in several aspects, including development of broadband devices, novel modulation formats and coding, and high-performance DSP algorithms for the past few years. A great momentum has been accumulated to overcome the aforementioned challenges. In this article, we focus on IM/DD transmissions, and provide an overview of recent research and development efforts on key enabling technologies for 200 Gbps per lane and beyond. Our recent demonstrations of 200 Gbps short-reach transmissions with 4-level pulse amplitude modulation (PAM) and discrete multitone signals are also presented as examples to show the system requirements in terms of device characteristics and DSP performance. Apart from digital coherent technologies and advanced direct detection systems, such as Stokes–vector and Kramers–Kronig schemes, we expect high-speed IM/DD systems will remain advantageous in terms of system cost, power consumption, and footprint for short reach applications in the short- to mid- term perspective.

A monolithic bipolar CMOS electronic–plasmonic high-speed transmitter

Abstract: To address the challenge of increasing data rates, next-generation optical communication networks will require the co-integration of electronics and photonics. Heterogeneous integration of these technologies has shown promise, but will eventually become bandwidth-limited. Faster monolithic approaches will therefore be needed, but monolithic approaches using complementary metal–oxide–semiconductor (CMOS) electronics and silicon photonics are typically limited by their underlying electronic or photonic technologies. Here, we report a monolithically integrated electro-optical transmitter that can achieve symbol rates beyond 100 GBd. Our approach combines advanced bipolar CMOS with silicon plasmonics, and addresses key challenges in monolithic integration through co-design of the electronic and plasmonic layers, including thermal design, packaging and a nonlinear organic electro-optic material. To illustrate the potential of our technology, we develop two modulator concepts—an ultra-compact plasmonic modulator and a silicon-plasmonic modulator with photonic routing—both directly processed onto the bipolar CMOS electronics. The monolithic integration of electronic and plasmonic technologies can be used to create electro-optic transmitters capable of symbol rates beyond 100 GBd.

Toward reliable hybrid WDM/TDM passive optical networks

Abstract: Individual users and enterprises are increasingly relying on the access to Internet services and cannot accept long interruption time as easily as before. Moreover, the main characteristics of next generation optical access (NGOA) networks, such as long reach and a large number of users per feeder line, turn the network reliability to an important design parameter to offer uninterrupted service delivery. In this regard, protection mechanisms become one of the crucial aspects that need to be considered in the design process of access networks. On the other hand, it should be noted that not all users can afford to pay a high extra cost for protection; hence, it is important to provide resilience in a costefficient way. A PON combining WDM and TDM technologies, referred to as hybrid WDM/TDM PON or HPON, is one of the most promising candidates for NGOA networks due to its ability to serve a large number of subscribers and offer high capacity per user. For these reasons, in this article, we propose HPON architecture offering different degrees of resilience depending on the user profiles (i.e., partial and full protection for residential and business access, respectively). Also, the investment cost of providing resilience for the proposed schemes is investigated considering various protection upgrade road maps. Our results confirm that protecting the shared part of network with a large number of users is required in order to keep the failure impact at an acceptable level, with less than 5 percent increase of investment cost compared to the unprotected case. Meanwhile, the proposed end-to-end protection for business users considerably reduces the risk of service interruption for this type of demanding user without a need to duplicate the deployment cost of an unprotected connection. Furthermore, a sensitivity analysis is performed to investigate the impact of changes in business user percentage and protection upgrade time on the deployment cost. The results may be used as advice on cost-efficient deployment of reliable fiber access networks.

Cost modeling of backhaul for mobile networks

Abstract: Wireless heterogeneous networks (HetNets) based on small cells are a cost and energy efficient alternative to provide high capacity to the end users. On the other hand, the cost and energy consumpt ...