Jiang Liu

Bio: Jiang Liu is an academic researcher from Beijing University of Technology. The author has contributed to research in topics: Fiber laser & Dispersion-shifted fiber. The author has an hindex of 16, co-authored 62 publications receiving 1072 citations.

Stable nanosecond pulse generation from a graphene-based passively Q-switched Yb-doped fiber laser.

Abstract: We demonstrate stable 70 ns pulse generation from a Yb-doped fiber laser passively Q-switched by a graphene-based saturable absorber mirror in a short linear cavity. The maximum output power was 12 mW and the highest single pulse energy was 46 nJ. The repetition rate of the fiber laser can be widely tuned from 140 to 257 kHz along with the increase of the pump power. To the best of our knowledge, this is the first report for passively Q-switched sub-100-ns pulse operation of a graphene-based saturable absorber in a Yb-doped fiber laser.

Graphene oxide mode-locked femtosecond erbium-doped fiber lasers

Abstract: We demonstrated the femtosecond erbium-doped all-fiber lasers mode-locked with graphene oxide, which can be conveniently obtained from natural graphite by simple oxidation and ultra-sonication process. With proper dispersion management in an all-fiber ring cavity, the laser directly generated 200 fs pulses at a repetition rate of 22.9 MHz and the average output power was 5.8 mW. With the variation of net cavity dispersion, output pulses with pulse width of 0.2~3 ps were obtained at a repetition rate of 22.9~0.93 MHz. These results are comparable with those of graphene saturable absorbers and the superiority of easy fabrication and hydrophilic property of graphene oxide will facilitate its potential applications for ultrafast photonics.

High power mid-infrared supercontinuum generation in a single-mode ZBLAN fiber with up to 21.8 W average output power

Abstract: We report high power mid-infrared (mid-IR) supercontinuum (SC) generation in a single-mode ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) fiber with up to 21.8 W average output power from 1.9 to beyond 3.8 μm pumped by amplified picosecond pulses from a single-mode thulium-doped fiber (TDF) master oscillator power amplifier (MOPA). The optical-optical conversion efficiency from the 793 nm pump laser of the last stage thulium-doped fiber amplifier (TDFA) to mid-IR SC output is 17%. It is, to the best of our knowledge, the highest average power mid-IR SC generation from a ZBLAN fiber to date.

High average power picosecond pulse and supercontinuum generation from a thulium-doped, all-fiber amplifier.

Abstract: We demonstrate a high-power, picosecond, thulium-doped, all-fiber master oscillator power amplifier with average power of 120.4 W. The compact fiber oscillator is carefully designed with high repetition rate for the purpose of overcoming the detrimental effects of fiber nonlinearity in the later fiber amplifiers. The pulse duration of 16 ps at 333.75 MHz repetition rate results in a peak power of 22.5 kW in the final fiber power amplifier. To the best of our knowledge, this is the first demonstration of average power exceeding 100 W from an ultrashort pulse laser at 2 μm wavelength. On the other hand, by decreasing the fiber oscillator repetition rate and pulse duration for enhancing the fiber nonlinearity effects, we also demonstrate a high-power supercontinuum source with average power of 36 W from 1.95 μm to beyond 2.4 μm in the final fiber power amplifier.

Ultra-short pulse generation by a topological insulator based saturable absorber

Abstract: Under strong laser radiation, a Dirac material, the topological insulator (TI) Bi2Te3, exhibits an optical transmittance increase as a result of saturable absorption. Based on an open-aperture Z-scan measurement at 1550 nm, we clearly show that the TI, Bi2Te3 under our investigation, is indeed a very-high-modulation-depth (up to 95%) saturable absorber. Furthermore, a TI based saturable absorber device was fabricated and used as a passive mode locker for ultrafast pulse formation at the telecommunication band. This contribution unambiguously shows that apart from its fantastic electronic property, a TI (Bi2Te3) may also possess attractive optoelectronic property for ultrafast photonics.

WS2 mode-locked ultrafast fiber laser

Abstract: Graphene-like two dimensional materials, such as WS2 and MoS2, are highly anisotropic layered compounds that have attracted growing interest from basic research to practical applications. Similar with MoS2, few-layer WS2 has remarkable physical properties. Here, we demonstrate for the first time that WS2 nanosheets exhibit ultrafast nonlinear saturable absorption property and high optical damage threshold. Soliton mode-locking operations are achieved separately in an erbium-doped fiber laser using two types of WS2-based saturable absorbers, one of which is fabricated by depositing WS2 nanosheets on a D-shaped fiber, while the other is synthesized by mixing WS2 solution with polyvinyl alcohol, and then evaporating them on a substrate. At the maximum pump power of 600 mW, two saturable absorbers can work stably at mode-locking state without damage, indicating that few-layer WS2 is a promising high-power flexible saturable absorber for ultrafast optics. Numerous applications may benefit from the ultrafast nonlinear features of WS2 nanosheets, such as high-power pulsed laser, materials processing, and frequency comb spectroscopy.

Wavelength-tunable picosecond soliton fiber laser with Topological Insulator: Bi2Se3 as a mode locker.

Abstract: Based on the open-aperture Z-scan measurement, we firstly uncovered the saturable absorption property of the topological insulator (TI): Bi2Se3. A high absolute modulation depth up to 98% and a saturation intensity of 0.49 GWcm−2 were identified. By incorporating this novel saturable absorber material into an erbium-doped fiber laser, wavelength tunable soliton operation was experimentally demonstrated. Our result indicates that like the atomic layer graphene, the topological insulator Bi2Se3 could also operate as an effective saturable absorber for the passive mode locking of lasers at the telecommunication band.

Graphene Oxide vs. Reduced Graphene Oxide as saturable absorbers for Er-doped passively mode-locked fiber laser

Abstract: In this work we demonstrate comprehensive studies on graphene oxide (GO) and reduced graphene oxide (rGO) based saturable absorbers (SA) for mode-locking of Er-doped fiber lasers. The paper describes the fabrication process of both saturable absorbers and detailed comparison of their parameters. Our results show, that there is no significant difference in the laser performance between the investigated SA. Both provided stable, mode-locked operation with sub-400 fs soliton pulses and more than 9 nm optical bandwidth at 1560 nm center wavelength. It has been shown that GO might be successfully used as an efficient SA without the need of its reduction to rGO. Taking into account simpler manufacturing technology and the possibility of mass production, GO seems to be a good candidate as a cost-effective material for saturable absorbers for Er-doped fiber lasers.

Graphene Oxide vs. Reduced Graphene Oxide as saturable absorbers for Er-doped passively mode-locked fiber laser

Abstract: In this work we demonstrate comprehensive studies on graphene oxide (GO) and reduced graphene oxide (rGO) based saturable absorbers (SA) for mode-locking of Er-doped fiber lasers. The paper describes the fabrication process of both saturable absorbers and detailed comparison of their parameters. Our results show, that there is no significant difference in the laser performance between the investigated SA. Both provided stable, mode-locked operation with sub-400 fs soliton pulses and more than 9 nm optical bandwidth at 1560 nm center wavelength. It has been shown that GO might be successfully used as an efficient SA without the need of its reduction to rGO. Taking into account simpler manufacturing technology and the possibility of mass production, GO seems to be a good candidate as a cost-effective material for saturable absorbers for Er-doped fiber lasers.