Jianguo Wang

Bio: Jianguo Wang is an academic researcher from Chinese Academy of Sciences. The author has contributed to research in topics: Catalysis & Adsorption. The author has an hindex of 56, co-authored 360 publications receiving 11839 citations.

MnOx-CeO2 mixed oxide catalysts for complete oxidation of formaldehyde: Effect of preparation method and calcination temperature

Abstract: MnO x –CeO 2 mixed oxides prepared by sol–gel method, coprecipitation method and modified coprecipitation method were investigated for the complete oxidation of formaldehyde. Structure analysis by H 2 -TPR and XPS revealed that there were more Mn 4+ species and richer lattice oxygen on the surface of the catalyst prepared by the modified coprecipitation method than those of the catalysts prepared by sol–gel and coprecipitation methods, resulting in much higher catalytic activity toward complete oxidation of formaldehyde. The effect of calcination temperature on the structural features and catalytic behavior of the MnO x –CeO 2 mixed oxides prepared by the modified coprecipitation was further examined, and the catalyst calcined at 773 K showed 100% formaldehyde conversion at a temperature as low as 373 K. For the samples calcined below 773 K, no any diffraction peak corresponding to manganese oxides could be detected by XRD measurement due to the formation of MnO x –CeO 2 solid solution. While the diffraction peaks corresponding to MnO 2 phase in the samples calcined above 773 K were clearly observed, indicating the occurrence of phase segregation between MnO 2 and CeO 2 . Accordingly, it was supposed that the strong interaction between MnO x and CeO 2 , which depends on the preparation route and the calcination temperature, played a crucial role in determining the catalytic activity toward the complete oxidation of formaldehyde.

The formation and degradation of active species during methanol conversion over protonated zeotype catalysts

Abstract: The methanol to hydrocarbon (MTH) process provides an efficient route for the conversion of carbon-based feedstocks into olefins, aromatics and gasoline. Still, there is room for improvements in product selectivity and catalytic stability. This task calls for a fundamental understanding of the formation, catalytic mechanism and degradation of active sites. The autocatalytic feature of the MTH process implies that hydrocarbons are active species on the one hand and deactivating species on the other hand. The steady-state performance of such species has been thoroughly studied and reviewed. However, the mechanism of formation of the initial hydrocarbon species (i.e.; the first C–C bond) and the evolution of active species into deactivating coke species have received less attention. Therefore, this review focuses on the significant progress recently achieved in these two stages by a combination of theoretical calculations, model studies, operando spectroscopy and catalytic tests.

Conversion of Methanol to Olefins over H-ZSM-5 Zeolite: Reaction Pathway Is Related to the Framework Aluminum Siting

Abstract: As the conversion of methanol to olefins (MTO) over a zeolite catalyst is conducted on acid sites derived from framework aluminum (AlF), it is possible to enhance the catalytic performance by altering the siting of AlF if one knows the catalytic behavior of specified AlF located at certain sites. In this work, two series of H-ZSM-5 zeolites, viz., S-HZ-m and T-HZ-m, were synthesized with silica sol and tetraethyl orthosilicate, respectively, as the silicon source. Both series of H-ZSM-5 zeolites exhibit similar acidity, morphology, and textual properties. However, they are quite different with respect to AlF siting, as determined by UV–vis–DRS of Co(II) ions and 27Al MAS NMR; AlF of S-HZ-m is enriched in the sinusoidal and straight channels, whereas AlF of T-HZ-m is concentrated in the channel intersections. When they are used as the catalyst in MTO, T-HZ-m gives higher selectivity to ethene and aromatics and a larger hydrogen transfer index (HTI) than S-HZ-m, whereas S-HZ-m exhibits higher selectivity to...

Deep eutectic solvents: syntheses, properties and applications

Abstract: Within the framework of green chemistry, solvents occupy a strategic place. To be qualified as a green medium, these solvents have to meet different criteria such as availability, non-toxicity, biodegradability, recyclability, flammability, and low price among others. Up to now, the number of available green solvents are rather limited. Here we wish to discuss a new family of ionic fluids, so-called Deep Eutectic Solvents (DES), that are now rapidly emerging in the current literature. A DES is a fluid generally composed of two or three cheap and safe components that are capable of self-association, often through hydrogen bond interactions, to form a eutectic mixture with a melting point lower than that of each individual component. DESs are generally liquid at temperatures lower than 100 °C. These DESs exhibit similar physico-chemical properties to the traditionally used ionic liquids, while being much cheaper and environmentally friendlier. Owing to these remarkable advantages, DESs are now of growing interest in many fields of research. In this review, we report the major contributions of DESs in catalysis, organic synthesis, dissolution and extraction processes, electrochemistry and material chemistry. All works discussed in this review aim at demonstrating that DESs not only allow the design of eco-efficient processes but also open a straightforward access to new chemicals and materials.

Fundamentals and Catalytic Applications of CeO2-Based Materials

Abstract: Cerium dioxide (CeO2, ceria) is becoming an ubiquitous constituent in catalytic systems for a variety of applications. 2016 sees the 40th anniversary since ceria was first employed by Ford Motor Company as an oxygen storage component in car converters, to become in the years since its inception an irreplaceable component in three-way catalysts (TWCs). Apart from this well-established use, ceria is looming as a catalyst component for a wide range of catalytic applications. For some of these, such as fuel cells, CeO2-based materials have almost reached the market stage, while for some other catalytic reactions, such as reforming processes, photocatalysis, water-gas shift reaction, thermochemical water splitting, and organic reactions, ceria is emerging as a unique material, holding great promise for future market breakthroughs. While much knowledge about the fundamental characteristics of CeO2-based materials has already been acquired, new characterization techniques and powerful theoretical methods are dee...

Ab initio calculation of vibrational absorption and circular dichroism spectra using density functional force fields

Abstract: : The unpolarized absorption and circular dichroism spectra of the fundamental vibrational transitions of the chiral molecule, 4-methyl-2-oxetanone, are calculated ab initio. Harmonic force fields are obtained using Density Functional Theory (DFT), MP2, and SCF methodologies and a 5S4P2D/3S2P (TZ2P) basis set. DFT calculations use the Local Spin Density Approximation (LSDA), BLYP, and Becke3LYP (B3LYP) density functionals. Mid-IR spectra predicted using LSDA, BLYP, and B3LYP force fields are of significantly different quality, the B3LYP force field yielding spectra in clearly superior, and overall excellent, agreement with experiment. The MP2 force field yields spectra in slightly worse agreement with experiment than the B3LYP force field. The SCF force field yields spectra in poor agreement with experiment.The basis set dependence of B3LYP force fields is also explored: the 6-31G* and TZ2P basis sets give very similar results while the 3-21G basis set yields spectra in substantially worse agreements with experiment. jg