This paper studies a number of quantized feedback design problems for linear systems. We consider the case where quantizers are static (memoryless). The common aim of these design problems is to stabilize the given system or to achieve certain performance with the coarsest quantization density. Our main discovery is that the classical sector bound approach is nonconservative for studying these design problems. Consequently, we are able to convert many quantized feedback design problems to well-known robust control problems with sector bound uncertainties. In particular, we derive the coarsest quantization densities for stabilization for multiple-input-multiple-output systems in both state feedback and output feedback cases; and we also derive conditions for quantized feedback control for quadratic cost and H/sub /spl infin// performances.

The sector bound approach to quantized feedback control | NOVA. The University of Newcastle's Digital Repository

The authors discuss high-voltage power conversion. Conventional series connection and three-level voltage source inverter techniques are reviewed and compared. A novel versatile multilevel commutation cell is introduced: it is shown that this topology is safer and more simple to control, and delivers purer output waveforms. The authors show how this technique can be applied to either choppers or voltage-source inverters and generalized to any number of switches.<<ETX>>

Multi-level conversion : high voltage choppers and voltage-source inverters

This study gives the mathematic model of a quadrotor unmanned aerial vehicle (UAV) and then proposes a robust nonlinear controller which combines the sliding-mode control technique and the backstepping control technique. To achieve Cartesian position trajectory tracking capability, the construction of the controller can be divided into two stages: a regular SMC controller for attitude subsystem (inner loop) is first developed to guarantee fast convergence rapidity of Euler angles and the backstepping technique is applied to the position loop until desired attitudes are obtained and then the ultimate control laws. The stability of the closed-loop system is guaranteed by stabilizing each of the subsystems step by step and the robustness of the controller against model uncertainty and external disturbances is investigated. In addition, an adaptive observer-based fault estimation scheme is also considered for taking off mode. Simulations are conducted to demonstrate the effectiveness of the designed robust nonlinear controller and the fault estimation scheme.

Robust Backstepping Sliding-Mode Control and Observer-Based Fault Estimation for a Quadrotor UAV

Event-triggered sliding mode control of stochastic systems via output feedback ☆

This paper proposes an extended state observer (ESO) based second-order sliding-mode (SOSM) control for three-phase two-level grid-connected power converters. The proposed control technique forces the input currents to track the desired values, which can indirectly regulate the output voltage while achieving a user-defined power factor. The presented approach has two control loops. A current control loop based on an SOSM and a dc-link voltage regulation loop which consists of an ESO plus SOSM. In this work, the load connected to the dc-link capacitor is considered as an external disturbance. An ESO is used to asymptotically reject this external disturbance. Therefore, its design is considered in the control law derivation to achieve a high performance. Theoretical analysis is given to show the closed-loop behavior of the proposed controller and experimental results are presented to validate the control algorithm under a real power converter prototype.

/pdf/extended-state-observer-based-sliding-mode-control-for-three-3cqp1mmnjt.pdf

Extended State Observer-Based Sliding-Mode Control for Three-Phase Power Converters

In this paper, the design of a nonlinear observer-based fault diagnosis approach for polymer electrolyte membrane (PEM) fuel cell air-feed systems is presented, taking into account a fault scenario of sudden air leak in the air supply manifold. Based on a simplified nonlinear model proposed in the literature, a modified super-twisting (ST) sliding mode algorithm is employed to the observer design. The proposed ST observer can estimate not only the system states, but also the fault signal. Then, the residual signal is computed online from comparisons between the oxygen excess ratio obtained from the system model and the observer system, respectively. Equivalent output error injection using the residual signal is able to reconstruct the fault signal, which is critical in both fuel cell control design and fault detection. Finally, the proposed observer-based fault diagnosis approach is implemented on the MATLAB/Simulink environment in order to verify its effectiveness and robustness in the presence of load variation.

/pdf/robust-model-based-fault-diagnosis-for-pem-fuel-cell-air-3ifbdzyc99.pdf

Robust Model-Based Fault Diagnosis for PEM Fuel Cell Air-Feed System

In this paper, a model-based robust control is proposed for the polymer electrolyte membrane fuel cell air-feed system, based on the second-order sliding mode algorithm. The control objective is to maximize the fuel cell net power and avoid the oxygen starvation by regulating the oxygen excess ratio to its desired value during fast load variations. The oxygen excess ratio is estimated via an extended state observer (ESO) from the measurements of the compressor flow rate, the load current, and the supply manifold pressure. A hardware-in-loop test bench, which consists of a commercial twin screw air compressor and a real-time fuel cell emulation system, is used to validate the performance of the proposed ESO-based controller. The experimental results show that the controller is robust and has a good transient performance in the presence of load variations and parametric uncertainties.

Jianxing Liu

Papers

Event-triggered sliding mode control of stochastic systems via output feedback ☆

Extended State Observer-Based Sliding-Mode Control for Three-Phase Power Converters

Robust Model-Based Fault Diagnosis for PEM Fuel Cell Air-Feed System

Disturbance-Observer-Based Control for Air Management of PEM Fuel Cell Systems via Sliding Mode Technique

Practical tracking control of linear motor via fractional-order sliding mode