In this article we report a new laser processing method, combining the in situ graphitization of polyimide with simultaneous transfer of the graphene patterns to arbitrary substrates. The synthesis conditions are similar to those normally used for the well-known laser-induced graphene method. The approach is based on the enclosure of polyimide sheets between microscope glass slides. Graphene patterns have been successfully generated on glass and on PDMS, as well as graphene decorated with metals and oxides. In order to illustrate the usefulness of the proposed approach, the method was applied to the fabrication of hybrid supercapacitors, which exhibited very good electrochemical performance.

In situ growth of laser-induced graphene micro-patterns on arbitrary substrates.

Extreme environments represent numerous harsh environmental conditions, such as temperature, pressure, corrosion, and radiation. The tolerance of applications in extreme environments exemplifies significant challenges to both materials and their structures. Given the superior mechanical strength, electrical conductivity, thermal stability, and chemical stability of nanocarbon materials, such as carbon nanotubes (CNTs) and graphene, they are widely investigated as base materials for extreme environmental applications and have shown numerous breakthroughs in the fields of wide‐temperature structural‐material construction, low‐temperature energy storage, underwater sensing, and electronics operated at high temperatures. Here, the critical aspects of structural design and fabrication of nanocarbon materials for extreme environments are reviewed, including a description of the underlying mechanism supporting the performance of nanocarbon materials against extreme environments, the principles of structural design of nanocarbon materials for the optimization of extreme environmental performances, and the fabrication processes developed for the realization of specific extreme environmental applications. Finally, perspectives on how CNTs and graphene can further contribute to the development of extreme environmental applications are presented.

Structural Design and Fabrication of Multifunctional Nanocarbon Materials for Extreme Environmental Applications

Graphene is fundamentally a two-dimensional material with extraordinary optical, thermal, mechanical, and electrical characteristics. It has a versatile surface chemistry and large surface area. It is a carbon nanomaterial, which comprises sp2 hybridized carbon atoms placed in a hexagonal lattice with one-atom thickness, giving it a two-dimensional structure. A large number of synthesis techniques including epitaxial growth, liquid phase exfoliation, electrochemical exfoliation, mechanical exfoliation, and chemical vapor deposition are used for the synthesis of graphene. Graphene prepared using different techniques can have a number of benefits and deficiencies depending on its application. This study provides a summary of graphene preparation techniques and critically assesses the use of graphene, its derivates, and composites in environmental applications. These applications include the use of graphene as membrane material for the detoxication and purification of water, active material for gas sensing, heavy metal ions detection, and CO2 conversion. Furthermore, a trend analysis of both synthesis techniques and environmental applications of graphene has been performed by extracting and analyzing Scopus data from the past ten years. Finally, conclusions and outlook are provided to address the residual challenges related to the synthesis of the material and its use for environmental applications.

/pdf/graphene-synthesis-techniques-and-environmental-applications-1b909m2w.pdf

Graphene Synthesis Techniques and Environmental Applications

This paper demonstrates an optical-thermally actuated multi-layer graphene resonator for humidity sensing. A ~10-layered graphene resonator with a diameter of 125 μm peripherally clamped on the fiber ferrule end face was actuated to vibrate using the intensity-modulated laser, and the vibration was detected based on the optical fiber Fabry-Perot interference method. The humidity sensing experiment exhibited an up to 350 Hz/%RH humidity sensitivity in the range of 0-100% RH at 25 °C, which was 10 times higher than those of the previously reported Quartz Crystal Microbalance (QCM)-based humidity sensors. Also, a good repeatability of the frequency-humidity response was observed for the presented graphene resonator. Moreover, in view of the coupling effect of temperature on the graphene resonator, the temperature drift of 0.942 kHz/°C was measured in the range of 25-50 °C, thereby inducing an absolute humidity error of about 0.6 g/(m 3 ·°C). • Micro fiber-optic graphene resonators are fabricated and used for humidity sensing innovatively. • Graphene resonators exhibit a much higher humidity sensitivity of 350 Hz/%RH compared with the Quartz Crystal Microbalance. • The humidity response of the graphene resonators shows the good linearity and stability at atmospheric pressure. 

Optical-Thermally Actuated Graphene Mechanical Resonator for Humidity Sensing

Antibiotics are powerful tools to treat bacterial infections, but antibiotic pollution is becoming a severe threat to the effective treatment of human bacterial infections. The detection of antibiotics in water has been a crucial research area for bioassays in recent years. There is still an urgent need for a simple ultrasensitive detection approach to achieve accurate antibiotic detection at low concentrations. Herein, a field-effect transistor (FET)-based biosensor was developed using ultraclean graphene and an aptamer for ultrasensitive tetracycline detection. Using a newly designed camphor-rosin clean transfer (CRCT) scheme to prepare ultraclean graphene, the carrier mobility of the FET is found to be improved by more than 10 times compared with the FET prepared by the conventional PMMA transfer (CPT) method. Based on the FET, aptamer-functionalized transistor antibiotic biosensors were constructed and characterized. A dynamic detection range of 5 orders of magnitude, a sensitivity of 21.7 mV/decade, and a low detection limit of 100 fM are achieved for the CRCT-FET biosensors with good stability, which are much improved compared with the biosensor prepared by the CPT method. The antibiotic sensing and sensing performance enhancement mechanisms for the CRCT-FET biosensor were studied and analyzed based on experimental results and a biosensing model. Finally, the CRCT-FET biosensor was verified by detecting antibiotics in actual samples obtained from the entrances of Bohai Bay.

Jielin Chen

Papers

Recent Progress in the Transfer of Graphene Films and Nanostructures