Joachim Knoch

Bio: Joachim Knoch is an academic researcher from RWTH Aachen University. The author has contributed to research in topics: Field-effect transistor & Schottky barrier. The author has an hindex of 37, co-authored 160 publications receiving 7765 citations. Previous affiliations of Joachim Knoch include IBM & Forschungszentrum Jülich.

Band-to-band tunneling in carbon nanotube field-effect transistors.

Abstract: A detailed study on the mechanism of band-to-band tunneling in carbon nanotube field-effect transistors (CNFETs) is presented. Through a dual-gated CNFET structure tunneling currents from the valence into the conduction band and vice versa can be enabled or disabled by changing the gate potential. Different from a conventional device where the Fermi distribution ultimately limits the gate voltage range for switching the device on or off, current flow is controlled here by the valence and conduction band edges in a bandpass-filter-like arrangement. We discuss how the structure of the nanotube is the key enabler of this particular one-dimensional tunneling effect.

The Role of Metal-Nanotube Contact in the Performance of Carbon Nanotube Field-Effect Transistors

Abstract: Single-wall carbon nanotube field-effect transistors (CNFETs) have been shown to behave as Schottky barrier (SB) devices. It is not clear, however, what factors control the SB size. Here we present the first statistical analysis of this issue. We show that a large data set of more than 100 devices can be consistently accounted by a model that relates the on-current of a CNFET to a tunneling barrier whose height is determined by the nanotube diameter and the nature of the source/drain metal contacts. Our study permits identification of the desired combination of tube diameter and type of metal that provides the optimum performance of a CNFET.

High-performance carbon nanotube field-effect transistor with tunable polarities

Abstract: State-of-the-art carbon nanotube field-effect transistors (CNFETs) behave as Schottky-barrier-modulated transistors. It is known that vertical scaling of the gate oxide significantly improves the performance of these devices. However, decreasing the oxide thickness also results in pronounced ambipolar transistor characteristics and increased drain leakage currents. Using a novel device concept, we have fabricated high-performance enhancement-mode CNFETs exhibiting n- or p-type unipolar behavior, tunable by electrostatic and/or chemical doping, with excellent OFF-state performance and a steep subthreshold swing (S=63 mV/dec). The device design allows for aggressive oxide thickness and gate-length scaling while maintaining the desired device characteristics.

Field-modulated carrier transport in carbon nanotube transistors.

Abstract: We have investigated the electrical transport properties of carbon nanotube field-effect transistors as a function of channel length, gate dielectric film thickness, and dielectric material. Our experiments show that the bulk properties of the semiconducting carbon nanotubes do not limit the current flow through the metal/nanotube/metal system. Instead, our results can be understood in the framework of gate and source-drain field induced modulation of the nanotube band structure at the source contact. The existence of one-dimensional Schottky barriers at the metal/nanotube interface determines the device performance and results in an unexpected scaling behavior.

Carbon nanotube electronics

Abstract: Presents experimental results on single-wall carbon nanotube field-effect transistors (CNFETs) operating at gate and drain voltages below 1V. Taking into account the extremely small diameter of the semiconducting tubes used as active components, electrical characteristics are comparable with state-of-the-art metal oxide semiconductor field-effect transistors (MOSFETs). While output as well as subthreshold characteristics resemble those of conventional MOSFETs, we find that CNFET operation is actually controlled by Schottky barriers (SBs) in the source and drain region instead of by the nanotube itself. Due to the small size of the contact region between the electrode and the nanotube, these barriers can be extremely thin, enabling good performance of SB-CNFETs.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Black phosphorus field-effect transistors

Abstract: Two-dimensional crystals have emerged as a class of materials that may impact future electronic technologies. Experimentally identifying and characterizing new functional two-dimensional materials is challenging, but also potentially rewarding. Here, we fabricate field-effect transistors based on few-layer black phosphorus crystals with thickness down to a few nanometres. Reliable transistor performance is achieved at room temperature in samples thinner than 7.5 nm, with drain current modulation on the order of 10(5) and well-developed current saturation in the I-V characteristics. The charge-carrier mobility is found to be thickness-dependent, with the highest values up to ∼ 1,000 cm(2) V(-1) s(-1) obtained for a thickness of ∼ 10 nm. Our results demonstrate the potential of black phosphorus thin crystals as a new two-dimensional material for applications in nanoelectronic devices.

Carbon Nanotubes: Present and Future Commercial Applications

Abstract: Worldwide commercial interest in carbon nanotubes (CNTs) is reflected in a production capacity that presently exceeds several thousand tons per year. Currently, bulk CNT powders are incorporated in diverse commercial products ranging from rechargeable batteries, automotive parts, and sporting goods to boat hulls and water filters. Advances in CNT synthesis, purification, and chemical modification are enabling integration of CNTs in thin-film electronics and large-area coatings. Although not yet providing compelling mechanical strength or electrical or thermal conductivities for many applications, CNT yarns and sheets already have promising performance for applications including supercapacitors, actuators, and lightweight electromagnetic shields.

Progress, Challenges, and Opportunities in Two-Dimensional Materials Beyond Graphene

Abstract: Graphene’s success has shown that it is possible to create stable, single and few-atom-thick layers of van der Waals materials, and also that these materials can exhibit fascinating and technologically useful properties. Here we review the state-of-the-art of 2D materials beyond graphene. Initially, we will outline the different chemical classes of 2D materials and discuss the various strategies to prepare single-layer, few-layer, and multilayer assembly materials in solution, on substrates, and on the wafer scale. Additionally, we present an experimental guide for identifying and characterizing single-layer-thick materials, as well as outlining emerging techniques that yield both local and global information. We describe the differences that occur in the electronic structure between the bulk and the single layer and discuss various methods of tuning their electronic properties by manipulating the surface. Finally, we highlight the properties and advantages of single-, few-, and many-layer 2D materials in...

Ballistic carbon nanotube field-effect transistors

Abstract: A common feature of the single-walled carbon-nanotube field-effect transistors fabricated to date has been the presence of a Schottky barrier at the nanotube–metal junctions1,2,3. These energy barriers severely limit transistor conductance in the ‘ON’ state, and reduce the current delivery capability—a key determinant of device performance. Here we show that contacting semiconducting single-walled nanotubes by palladium, a noble metal with high work function and good wetting interactions with nanotubes, greatly reduces or eliminates the barriers for transport through the valence band of nanotubes. In situ modification of the electrode work function by hydrogen is carried out to shed light on the nature of the contacts. With Pd contacts, the ‘ON’ states of semiconducting nanotubes can behave like ohmically contacted ballistic metallic tubes, exhibiting room-temperature conductance near the ballistic transport limit of 4e2/h (refs 4–6), high current-carrying capability (∼25 µA per tube), and Fabry–Perot interferences5 at low temperatures. Under high voltage operation, the current saturation appears to be set by backscattering of the charge carriers by optical phonons. High-performance ballistic nanotube field-effect transistors with zero or slightly negative Schottky barriers are thus realized.