Johann W. Kolar

Bio: Johann W. Kolar is an academic researcher from ETH Zurich. The author has contributed to research in topics: Rectifier & Three-phase. The author has an hindex of 97, co-authored 965 publications receiving 36902 citations. Previous affiliations of Johann W. Kolar include Alstom & Infineon Technologies.

Analysis and Design of a Passive Electrodynamic Bearing for an Ultra-High Speed Spinning Ball Motor

Abstract: The ongoing miniaturization trend of electric machines demands for higher rotational speeds to provide a required power level at decreased size. The goal of this project is to develop new concepts for bearingless machines with rotational speeds exceeding 25 million rotations per minute (Mrpm), which is the highest rotational speed ever achieved. A passive magnetic bearing for a spherical rotor of small size is presented, which generates a restoring force if the rotor is displaced from its equilibrium position. The achievable bearing forces are calculated analytically and verified through simulations and experiments.

Load-Independent Voltage Balancing of Multi-Level Flying Capacitor Converters in Quasi-2-Level Operation

Abstract: Quasi-2-level (Q2L) operation of multi-level bridge-legs, especially of flying-capacitor converters (FCC), is an interesting option for realizing single-cell power conversion in applications whose system voltages exceed the ratings of available power semiconductors. To ensure equal voltage sharing among a Q2L-FCC’s switches, the voltages of a Q2L-FCC’s minimized flying capacitors (FCs) must always be balanced. Thus, we propose a concept for load-independent FC voltage balancing: For non-zero load current, we use a model predictive control (MPC) approach to identify the commutation sequence of the individual switches within a Q2L transition that minimizes the FC or cell voltage errors. In case of zero load current, we employ a novel MPC-based approach using cell multiple switching (CMS), i.e., the insertion of additional zero-current commutations within a Q2L transition, to exchange charge between the FCs via the charging currents of the switches’ parasitic capacitances. Experiments with a 5-level FCC half-bridge demonstrator confirm the validity of the derived models and verify the performance of the proposed load-independent balancing concept.

Imposed Sinusoidal Source and Load Currents for an

Abstract: A new strategy for indirect matrix converters which allows an optimal control of source and load currents is pre- sented in this paper. This method uses the commutation state of the converter in the subsequent sampling time according to an optimization algorithm given by a simple cost functional and the discrete system model. The control goals are regulation of output current according to an arbitrary reference and also a good tracking of the source current to its reference which is imposed to have a sinusoidal waveform with low distortion. Experimental results support the theoretical development.

Switching Frequency Modulation in a Switched Mode Power Supply

Abstract: In accordance with an embodiment, a method includes driving at least one electronic switch coupled to at least one inductor in a converter stage of a switched mode power supply based on a clock signal, and modulating a clock frequency of the clock signal over a predefined first frequency range around a center frequency such that a frequency spectrum of the clock signal is asymmetric. The switched mode power supply includes a filter coupled between the converter stage and an input of the switched mode power supply.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Multilevel inverters: a survey of topologies, controls, and applications

Abstract: Multilevel inverter technology has emerged recently as a very important alternative in the area of high-power medium-voltage energy control. This paper presents the most important topologies like diode-clamped inverter (neutral-point clamped), capacitor-clamped (flying capacitor), and cascaded multicell with separate DC sources. Emerging topologies like asymmetric hybrid cells and soft-switched multilevel inverters are also discussed. This paper also presents the most relevant control and modulation methods developed for this family of converters: multilevel sinusoidal pulsewidth modulation, multilevel selective harmonic elimination, and space-vector modulation. Special attention is dedicated to the latest and more relevant applications of these converters such as laminators, conveyor belts, and unified power-flow controllers. The need of an active front end at the input side for those inverters supplying regenerative loads is also discussed, and the circuit topology options are also presented. Finally, the peripherally developing areas such as high-voltage high-power devices and optical sensors and other opportunities for future development are addressed.

Recent Advances and Industrial Applications of Multilevel Converters

Abstract: Multilevel converters have been under research and development for more than three decades and have found successful industrial application. However, this is still a technology under development, and many new contributions and new commercial topologies have been reported in the last few years. The aim of this paper is to group and review these recent contributions, in order to establish the current state of the art and trends of the technology, to provide readers with a comprehensive and insightful review of where multilevel converter technology stands and is heading. This paper first presents a brief overview of well-established multilevel converters strongly oriented to their current state in industrial applications to then center the discussion on the new converters that have made their way into the industry. In addition, new promising topologies are discussed. Recent advances made in modulation and control of multilevel converters are also addressed. A great part of this paper is devoted to show nontraditional applications powered by multilevel converters and how multilevel converters are becoming an enabling technology in many industrial sectors. Finally, some future trends and challenges in the further development of this technology are discussed to motivate future contributions that address open problems and explore new possibilities.