Johann W. Kolar

Bio: Johann W. Kolar is an academic researcher from ETH Zurich. The author has contributed to research in topics: Rectifier & Three-phase. The author has an hindex of 97, co-authored 965 publications receiving 36902 citations. Previous affiliations of Johann W. Kolar include Alstom & Infineon Technologies.

Self-Capacitance of High-Voltage Transformers

Abstract: The calculation of a transformer's parasitics, such as its self capacitance, is fundamental for predicting the frequency behavior of the device, reducing this capacitance value and moreover for more advanced aims of capacitance integration and cancellation. This paper presents a comprehensive procedure for calculating all contributions to the self-capacitance of high-voltage transformers and provides a detailed analysis of the problem, based on a physical approach. The advantages of the analytical formulation of the problem rather than a finite element method analysis are discussed. The approach and formulas presented in this paper can also be used for other wound components rather than just step-up transformers. Finally, analytical and experimental results are presented for three different high-voltage transformer architectures.

A comparative evaluation of isolated bi-directional DC/DC converters with wide input and output voltage range

Abstract: The working principles and design equations of four different isolated, bi-directional DC to DC converter topologies (a dual active bridge converter, a series resonant converter and two multiple stage topologies) for a 2 kW bi-directional battery charger that can be operated in a wide input and output voltage range are presented in this paper. The results of a detailed mathematical analysis of the converter topologies as well as digital simulation results are used to select the most efficient topology for this specific converter application, where the two-stage series resonant converter is identified to be the most promising, with up to 90% efficiency at rated power.

Classification and Comparative Evaluation of PV Panel-Integrated DC–DC Converter Concepts

Abstract: The strings of photovoltaic panels have a significantly reduced power output when mismatch between the panels occurs, as, e.g., caused by partial shading. With mismatch, either the panel-integrated diodes are bypassing the shaded panels if the string is operated at the current level of the unshaded panels, or some power of the unshaded panels is lost if the string current is reduced to the level of the shaded panels. With the implementation of dc-dc converters on panel level, the maximum available power can be extracted from each panel regardless of any mismatch. In this paper, different concepts of PV panel-integrated dc-dc converters are presented and their suitability for panel integration is evaluated. The buck-boost converter is identified as the most promising concept and an efficiency/power density ( η- ρ) Pareto optimization of this topology is shown. Based on the optimization results, two 275 W converter prototypes with either Silicon MOSFETs with a switching frequency of 100 kHz or gallium nitride FETs with a switching frequency of 400 kHz are designed for an input voltage range of 15 to 45 V and an output voltage range of 10 to 100 V. The theoretical considerations are verified by efficiency measurements which are compared to the characteristics of a commercial panel-integrated converter.

Ultraflat Interleaved Triangular Current Mode (TCM) Single-Phase PFC Rectifier

Abstract: This paper presents the analysis and realization of a topology suitable to realize a power factor correction (PFC) rectifier with a thickness of only a few millimeters. The low height of the converter requires all components to be integrated into the printed circuit board (PCB). Still reasonable dimensions of the converter PCB are feasible (221 mm × 157 mm for a 200 W PFC rectifier), since PCB-integrated inductors and capacitors allow for high energy densities due to their large surface area which facilitates a low thermal resistance to ambient. A multicell totem-pole PFC rectifier employing a soft-switching modulation scheme over the complete mains period is identified as an adequate topology. The mode of operation is entitled triangular current mode (TCM) due to the triangular-shaped inductor currents. The modulation technique requires a reliable description of the switching transition of a half-bridge in order to provide accurate timing parameters. For this purpose, a simplified model of the nonlinear MOSFETs' output capacitances facilitates closed-form analytical expressions for duty cycle and switching frequency. Furthermore, this paper details the control of three interleaved converter cells which yields a reduction of the input current ripple. A 200 W TCM PFC rectifier with a low height of 5 mm has been realized and measurement results are provided in order to validate the theoretical considerations. The presented TCM PFC rectifier achieves an efficiency of 94.6% and a power factor of 99.3% at nominal power.

Comparative evaluation of three-phase high-power-factor AC-DC converter concepts for application in future More Electric Aircraft

Abstract: A passive 12-pulse rectifier system, a two-level, and a three-level active three-phase pulsewidth-modulation (PWM) rectifier system are analyzed for supplying the dc-voltage link of a 5-kW variable-speed hydraulic pump drive of an electro-hydrostatic actuator to be employed in future More Electric Aircraft. Weight, volume, and efficiency of the concepts are compared for an input phase voltage range of 98-132 V and an input frequency range of 400-800 Hz. The 12-pulse system shows advantages concerning volume, efficiency, and complexity but is characterized by a high system weight. Accordingly, the three-level PWM rectifier is identified as the most advantageous solution. Finally, a novel extension of the 12-pulse rectifier system by turn-off power semiconductors is proposed which allows a control of the output voltage and, therefore, eliminates the dependency on the mains and load condition which constitutes a main drawback of the passive concept.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Multilevel inverters: a survey of topologies, controls, and applications

Abstract: Multilevel inverter technology has emerged recently as a very important alternative in the area of high-power medium-voltage energy control. This paper presents the most important topologies like diode-clamped inverter (neutral-point clamped), capacitor-clamped (flying capacitor), and cascaded multicell with separate DC sources. Emerging topologies like asymmetric hybrid cells and soft-switched multilevel inverters are also discussed. This paper also presents the most relevant control and modulation methods developed for this family of converters: multilevel sinusoidal pulsewidth modulation, multilevel selective harmonic elimination, and space-vector modulation. Special attention is dedicated to the latest and more relevant applications of these converters such as laminators, conveyor belts, and unified power-flow controllers. The need of an active front end at the input side for those inverters supplying regenerative loads is also discussed, and the circuit topology options are also presented. Finally, the peripherally developing areas such as high-voltage high-power devices and optical sensors and other opportunities for future development are addressed.

Recent Advances and Industrial Applications of Multilevel Converters

Abstract: Multilevel converters have been under research and development for more than three decades and have found successful industrial application. However, this is still a technology under development, and many new contributions and new commercial topologies have been reported in the last few years. The aim of this paper is to group and review these recent contributions, in order to establish the current state of the art and trends of the technology, to provide readers with a comprehensive and insightful review of where multilevel converter technology stands and is heading. This paper first presents a brief overview of well-established multilevel converters strongly oriented to their current state in industrial applications to then center the discussion on the new converters that have made their way into the industry. In addition, new promising topologies are discussed. Recent advances made in modulation and control of multilevel converters are also addressed. A great part of this paper is devoted to show nontraditional applications powered by multilevel converters and how multilevel converters are becoming an enabling technology in many industrial sectors. Finally, some future trends and challenges in the further development of this technology are discussed to motivate future contributions that address open problems and explore new possibilities.