John C. Fothergill

Bio: John C. Fothergill is an academic researcher from City University London. The author has contributed to research in topics: Space charge & Dielectric. The author has an hindex of 32, co-authored 161 publications receiving 5070 citations. Previous affiliations of John C. Fothergill include University of Southampton & Philadelphia University.

Electrical degradation and breakdown in polymers

Abstract: The book is in five parts: Part I introduces the physical and chemical structure of polymers and their breakdown; Part II reviews electrical degradation in polymers, and Part III reviews conduction and deterministic breakdown in solids. Part IV discusses the stochastic nature of break-down from empirical and modelling viewpoints, and Part V indicates practical implications and strategies for engineers. Much of the discussion applies to non-crystalline materials generally.

Internal charge behaviour of nanocomposites

Abstract: The incorporation of 23 nm titanium dioxide nanoparticles into an epoxy matrix to form a nanocomposite structure is described. It is shown that the use of nanometric particles results in a substantial change in the behaviour of the composite, which can be traced to the mitigation of internal charge when a comparison is made with conventional TiO2 fillers. A variety of diagnostic techniques (including dielectric spectroscopy, electroluminescence, thermally stimulated current, photoluminescence) have been used to augment pulsed electro-acoustic space charge measurement to provide a basis for understanding the underlying physics of the phenomenon. It would appear that, when the size of the inclusions becomes small enough, they act co-operatively with the host structure and cease to exhibit interfacial properties leading to Maxwell-Wagner polarization. It is postulated that the particles are surrounded by high charge concentrations in the Gouy-Chapman-Stern layer. Since nanoparticles have very high specific areas, these regions allow limited charge percolation through nano-filled dielectrics. The practical consequences of this have also been explored in terms of the electric strength exhibited. It would appear that there was a window in which real advantages accrue from the nano-formulated material. An optimum loading of about 10% (by weight) is indicated.

The effect of water absorption on the dielectric properties of epoxy nanocomposites

Abstract: In this research, the influence of water absorption on the dielectric properties of epoxy resin and epoxy micro-composites and nano-composites filled with silica has been studied. Nanocomposites were found to absorb significantly more water than unfilled epoxy. However, the microcomposite absorbed less water than unfilled epoxy: corresponding to the reduced proportion of the epoxy in this composite. The glass transition temperatures (Tg) of all the samples were measured by both differential scanning calorimetry and dielectric spectroscopy. The Tg decreased as the water absorption increased and, in all cases, corresponded to a drop of approximately 20 K as the humidity was increased from 0% to 100%. This implied that for all the samples, the amount of water in the resin component of the composites was almost identical. It was concluded that the extra water found in the nanocomposites was located around the surface of the nanoparticles. This was confirmed by measuring the water uptake, and the swelling and density change, as a function of humidity as water was absorbed. The water shell model, originally proposed by Lewis and developed by Tanaka, has been further developed to explain low frequency dielectric spectroscopy results in which percolation of charge carriers through overlapping water shells was shown to occur. This has been discussed in terms of a percolation model. At 100% relative humidity, water is believed to surround the nanoparticles with a thickness of approximately 5 monolayers. A second layer of water is proposed that is dispersed but sufficiently concentrated to be conductive; this may extend for approximately 25 nm. If all the water had existed in a single layer surrounding a nanoparticle, this layer would have been approximately 3 to 4 nm thick at 100%. This "characteristic thickness" of water surrounding a given size of nanoparticle appeared to be independent of the concentration of nanoparticles but approximately proportional to water uptake. Filler particles that have surfaces that are functionalized to be hydrophobic considerably reduce the amount of water absorbed in nanocomposites under the same conditions of humidity. Comments are made on the possible effect on electrical aging.

Towards an understanding of nanometric dielectrics

Abstract: Dielectric studies are described aimed at providing an understanding of the charge storage and transport of an epoxy resin containing TiO/sub 2/ nanoparticles. Comparative results for conventionally filled composites are given, and the results discussed in terms of the underlying physics. It is shown that nanometric fillers mitigate the interfacial polarization characteristic of conventional materials with a reduction in the internal field accumulations.

Space charge formation and its modified electric field under applied voltage reversal and temperature gradient in XLPE cable

Abstract: The results of space charge evolution in cross-linked polyethylene power cables under dc electrical field at a uniform temperature and during external voltage polarity reversal are presented in the paper. A mirror image charge distribution was observed in the steady state, but the pre-existing field altered the way in which the steady state charge distribution was formed from that obtaining when the cable was first polarized. Polarity reversing charge was generated in the middle of the insulation and moved towards the appropriate electrodes under the influence of a field in excess of the maximum applied field. Our results show that the mirror effect is a steady state effect that is due to cross-interface currents that depend only on the interface field and not its polarity. Measurements on cable sections with an elevated mean temperature and temperature gradient show that the interface currents are temperature dependent, and that differences between the activation energies of the interface and bulk currents can eliminate, and possibly even invert the polarity of the space charge distribution.

Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage

Abstract: Study of flexible nanodielectric materials (FNDMs) with high permittivity is one of the most active academic research areas in advanced functional materials. FNDMs with excellent dielectric properties are demonstrated to show great promise as energy-storage dielectric layers in high-performance capacitors. These materials, in common, consist of nanoscale particles dispersed into a flexible polymer matrix so that both the physical/chemical characteristics of the nanoparticles and the interaction between the nanoparticles and the polymers have crucial effects on the microstructures and final properties. This review first outlines the crucial issues in the nanodielectric field and then focuses on recent remarkable research developments in the fabrication of FNDMs with special constitutents, molecular structures, and microstructures. Possible reasons for several persistent issues are analyzed and the general strategies to realize FNDMs with excellent integral properties are summarized. The review further highlights some exciting examples of these FNDMs for power-energy-storage applications.

Proposal of a multi-core model for polymer nanocomposite dielectrics

Abstract: A multi-core model, i.e. a simplified term of a multi-layered core model, is proposed as a working hypothesis to understand various properties and phenomena that polymer nanocomposites exhibit as dielectrics and electrical insulation. It gives fine structures to what are called "interaction zones". An interfacial layer of several tens nm is multi-layered, which consists of a bonded layer, a bound layer, and a loose layer. In addition, the Gouy-Chapman diffuse layer with the Debye shielding length of several tens to 100 nm is superimposed in the interfacial layer to cause a far-field effect. Nano-particles may interact electrically with the nearest neighbors each other due to this effect, resulting in possible collaborative effect. Such a multi-core model with the far-field effect is discussed, for example, to explain partial discharge (PD) resistance of polyamide layered silicate nanocomposites, and is verified to demonstrate its effectiveness.

Dielectric nanocomposites with insulating properties

Abstract: Polymer nanocomposites possess promising high performances as engineering materials, if they are prepared and fabricated properly. Some work has been recently done on such polymer nanocomposites as dielectrics and electrical insulation. This was reviewed in 2004 based on the literatures published up to 2003. New significant findings have been added since then. Furthermore, a multi-core model with the far-distance effect, which is closely related to an "interaction zones", has been proposed from consideration of mesoscopic analysis of electrical and chemical structures of an existing interface with finite thickness. It is speculatively examined in the paper how the model works for various properties and phenomena already found in nanocomposites as dielectrics focusing on electrical characteristics, resistance to high voltage environment, and thermal properties.

Polymer nanocomposites as dielectrics and electrical insulation-perspectives for processing technologies, material characterization and future applications

Abstract: Polymer nanocomposites are defined as polymers in which small amounts of nanometer size fillers are homogeneously dispersed by only several weight percentages. Addition of just a few weight percent of the nanofillers has profound impact on the physical, chemical, mechanical and electrical properties of polymers. Such change is often favorable for engineering purpose. This nanocomposite technology has emerged from the field of engineering plastics, and potentially expanded its application to structural materials, coatings, and packaging to medical/biomedical products, and electronic and photonic devices. Recently these 'hi-tech' materials with excellent properties have begun to attract research people in the field of dielectrics and electrical insulation. Since new properties are brought about from the interactions of nanofillers with polymer matrices, mesoscopic properties are expected to come out, which would be interesting to both scientists and engineers. Improved characteristics are. expected as dielectrics and electrical insulation. Several interesting results to indicate the foreseeable future have been revealed, some of which are described on materials and processing in the paper together with basic concepts and future direction.