scispace - formally typeset
Search or ask a question
Author

John O'Reilly

Bio: John O'Reilly is an academic researcher from University of Glasgow. The author has contributed to research in topics: Fault (power engineering) & Multivariable calculus. The author has an hindex of 22, co-authored 44 publications receiving 5884 citations.

Papers
More filters
Book
01 Jan 1986
TL;DR: This SIAM Classics edition of the 1986 book, the original text is reprinted in its entirety (along with a new preface), providing once again the theoretical foundation for representative control applications.
Abstract: From the Publisher: Singular perturbations and time-scale techniques were introduced to control engineering in the late 1960s and have since become common tools for the modeling, analysis, and design of control systems. In this SIAM Classics edition of the 1986 book, the original text is reprinted in its entirety (along with a new preface), providing once again the theoretical foundation for representative control applications. This book continues to be essential in many ways. It lays down the foundation of singular perturbation theory for linear and nonlinear systems, it presents the methodology in a pedagogical way that is not available anywhere else, and it illustrates the theory with many solved examples, including various physical examples and applications. So while new developments may go beyond the topics covered in this book, they are still based on the methodology described here, which continues to be their common starting point. Audience Control engineers and graduate students who seek an introduction to singular perturbation methods in control will find this text useful. The book also provides research workers with sketches of problems in the areas of robust, adaptive, stochastic, and nonlinear control. No previous knowledge of singular perturbation techniques is assumed. About the Authors Petar Kokotovic is Director of the Center for Control Engineering and Computation at the University of California, Santa Barbara. Hassan K. Khalil is Professor of Electrical and Computer Engineering at Michigan State University. John O'Reilly is Professor of Electronics and Electrical Engineering at the University of Glasgow, Scotland.

2,446 citations

Journal ArticleDOI
TL;DR: The global exponential stability of the proposed disturbance observer (DO) is guaranteed by selecting design parameters, which depend on the maximum velocity and physical parameters of robotic manipulators.
Abstract: A new nonlinear disturbance observer (NDO) for robotic manipulators is derived in this paper. The global exponential stability of the proposed disturbance observer (DO) is guaranteed by selecting design parameters, which depend on the maximum velocity and physical parameters of robotic manipulators. This new observer overcomes the disadvantages of existing DOs, which are designed or analyzed by linear system techniques. It can be applied in robotic manipulators for various purposes such as friction compensation, independent joint control, sensorless torque control and fault diagnosis. The performance of the proposed observer is demonstrated by the friction estimation and compensation for a two-link robotic manipulator. Both simulation and experimental results show the NDO works well.

1,424 citations

Journal ArticleDOI
TL;DR: In this paper, cable faults in VSC-based dc networks are analyzed in detail with the identification and definition of the most serious stages of the fault that need to be avoided and a fault location method is proposed.
Abstract: The application of high-power voltage-source converters (VSCs) to multiterminal dc networks is attracting research interest. The development of VSC-based dc networks is constrained by the lack of operational experience, the immaturity of appropriate protective devices, and the lack of appropriate fault analysis techniques. VSCs are vulnerable to dc-cable short-circuit and ground faults due to the high discharge current from the dc-link capacitance. However, faults occurring along the interconnecting dc cables are most likely to threaten system operation. In this paper, cable faults in VSC-based dc networks are analyzed in detail with the identification and definition of the most serious stages of the fault that need to be avoided. A fault location method is proposed because this is a prerequisite for an effective design of a fault protection scheme. It is demonstrated that it is relatively easy to evaluate the distance to a short-circuit fault using voltage reference comparison. For the more difficult challenge of locating ground faults, a method of estimating both the ground resistance and the distance to the fault is proposed by analyzing the initial stage of the fault transient. Analysis of the proposed method is provided and is based on simulation results, with a range of fault resistances, distances, and operational conditions considered.

665 citations

Journal ArticleDOI
TL;DR: In this paper, the authors analyzed dc faults, their transients, and the resulting protection issues in a multiterminal dc wind farm with a voltage-source inverter (VSI) connection at the onshore grid.
Abstract: The multiterminal dc wind farm is a promising topology with a voltage-source inverter (VSI) connection at the onshore grid. Voltage-source converters (VSCs) are robust to ac-side fault conditions. However, they are vulnerable to dc faults on the dc side of the converter. This paper analyzes dc faults, their transients, and the resulting protection issues. Overcurrent faults are analyzed in detail and provide an insight into protection system design. The radial wind farm topology with star or string connection is considered. The outcomes may be applicable for VSCs in the multi-VSC dc wind farm collection grid and VSC-based high-voltage direct current (HVDC) offshore transmission systems.

301 citations

Journal ArticleDOI
TL;DR: In this paper, a series dynamic resistor (SDR) was proposed to avoid the doubly-fed induction generator (DFIG) control being disabled by conventional crowbar protection during fault conditions.
Abstract: This paper proposes a new converter protection method, primarily based on a series dynamic resistor (SDR) that avoids the doubly-fed induction generator (DFIG) control being disabled by crowbar protection during fault conditions. A combined converter protection scheme based on the proposed SDR and conventional crowbar is analyzed and discussed. The main protection advantages are due to the series topology when compared with crowbar and dc-chopper protection. Various fault overcurrent conditions (both symmetrical and asymmetrical) are analyzed and used to design the protection in detail, including the switching strategy and coordination with crowbar, and resistance value calculations. PSCAD/EMTDC simulation results show that the proposed method is advantageous for fault overcurrent protection, especially for asymmetrical faults, in which the traditional crowbar protection may malfunction.

279 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: An accurate assessment of the so-called chattering phenomenon is offered, which catalogs implementable sliding mode control design solutions, and provides a frame of reference for future sliding Mode control research.
Abstract: Presents a guide to sliding mode control for practicing control engineers. It offers an accurate assessment of the so-called chattering phenomenon, catalogs implementable sliding mode control design solutions, and provides a frame of reference for future sliding mode control research.

2,082 citations

Journal ArticleDOI
TL;DR: A method is proposed for designing controllers with arbitrarily small tracking error for uncertain, mismatched nonlinear systems in the strict feedback form and it is shown that these low pass filters allow a design where the model is not differentiated, thus ending the complexity arising due to the "explosion of terms" that has made other methods difficult to implement in practice.
Abstract: A method is proposed for designing controllers with arbitrarily small tracking error for uncertain, mismatched nonlinear systems in the strict feedback form. This method is another "synthetic input technique," similar to backstepping and multiple surface control methods, but with an important addition, /spl tau/-1 low pass filters are included in the design where /spl tau/ is the relative degree of the output to be controlled. It is shown that these low pass filters allow a design where the model is not differentiated, thus ending the complexity arising due to the "explosion of terms" that has made other methods difficult to implement in practice. The backstepping approach, while suffering from the problem of "explosion of terms" guarantees boundedness of tracking errors globally; however, the proposed approach, while being simpler to implement, can only guarantee boundedness of tracking error semiglobally, when the nonlinearities in the system are non-Lipschitz.

1,901 citations

Journal ArticleDOI
TL;DR: This survey gives a systematic and comprehensive tutorial and summary on the existing disturbance/uncertainty estimation and attenuation techniques, most notably, DOBC, active disturbance rejection control, disturbance accommodation control, and composite hierarchical antidisturbance control.
Abstract: Disturbance-observer-based control (DOBC) and related methods have been researched and applied in various industrial sectors in the last four decades. This survey, at first time, gives a systematic and comprehensive tutorial and summary on the existing disturbance/uncertainty estimation and attenuation techniques, most notably, DOBC, active disturbance rejection control, disturbance accommodation control, and composite hierarchical antidisturbance control. In all of these methods, disturbance and uncertainty are, in general, lumped together, and an observation mechanism is employed to estimate the total disturbance. This paper first reviews a number of widely used linear and nonlinear disturbance/uncertainty estimation techniques and then discusses and compares various compensation techniques and the procedures of integrating disturbance/uncertainty compensation with a (predesigned) linear/nonlinear controller. It also provides concise tutorials of the main methods in this area with clear descriptions of their features. The application of this group of methods in various industrial sections is reviewed, with emphasis on the commercialization of some algorithms. The survey is ended with the discussion of future directions.

1,849 citations

Book ChapterDOI
TL;DR: In this paper, the problem of controlling a fixed nonlinear plant in order to have its output track (or reject) a family of reference (or disturbance) signal produced by some external generator is discussed.
Abstract: The problem of controlling a fixed nonlinear plant in order to have its output track (or reject) a family of reference (or disturbance) signal produced by some external generator is discussed. It is shown that, under standard assumptions, this problem is solvable if and only if a certain nonlinear partial differential equation is solvable. Once a solution of this equation is available, a feedback law which solves the problem can easily be constructed. The theory developed incorporates previously published results established for linear systems. >

1,639 citations

Journal ArticleDOI
TL;DR: A classification of a number of decentralized, distributed and hierarchical control architectures for large scale systems is proposed and attention is focused on the design approaches based on Model Predictive Control.

1,234 citations