scispace - formally typeset
Search or ask a question
Author

John Wang

Bio: John Wang is an academic researcher from HRL Laboratories. The author has contributed to research in topics: Battery (electricity) & Lithium. The author has an hindex of 21, co-authored 45 publications receiving 8302 citations. Previous affiliations of John Wang include University of California, Los Angeles & Amazon.com.

Papers
More filters
Journal ArticleDOI
07 Feb 2011-Small
TL;DR: It is demonstrated that mesoporous α-Fe(2)O(3) thin-film electrodes not only exhibit enhanced lithium-ion storage capabilities compared to bulk materials but also show excellent cycling stabilities by suppressing the irreversible phase transformations that are observed in microcrystalline α- Fe(2).
Abstract: Herein is reported the synthesis of ordered mesoporous α-Fe(2)O(3) thin films produced through coassembly strategies using a poly(ethylene-co-butylene)-block-poly(ethylene oxide) diblock copolymer as the structure-directing agent and hydrated ferric nitrate as the molecular precursor. The sol-gel derived α-Fe(2)O(3) materials are highly crystalline after removal of the organic template and the nanoscale porosity can be retained up to annealing temperatures of 600 °C. While this paper focuses on the characterization of these materials using various state-of-the-art techniques, including grazing-incidence small-angle X-ray scattering, time-of-flight secondary ion mass spectrometry, X-ray photoelectron spectroscopy, and UV-vis and Raman spectroscopy, the electrochemical properties are also examined and it is demonstrated that mesoporous α-Fe(2)O(3) thin-film electrodes not only exhibit enhanced lithium-ion storage capabilities compared to bulk materials but also show excellent cycling stabilities by suppressing the irreversible phase transformations that are observed in microcrystalline α-Fe(2)O(3).

120 citations

Journal ArticleDOI
TL;DR: In this paper, a simple approach has been developed to align the graphene nanosheet vertically on current collector, which not only facilitates both lithium ion and electron transport, but also simplifies the electrode fabrication without involving binder and conductive additives.

115 citations

Journal ArticleDOI
Ping Liu1, John J. Vajo1, John Wang1, Wen Li1, Jun Liu1 
TL;DR: In this article, the authors employ galvanostatic intermittent titration (GITT), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) to study the reaction thermodynamics and kinetics.
Abstract: FeF3 is a promising cathode material for lithium batteries with a very high energy density due to its complete reduction to a mixture of LiF and Fe. The material is not yet practical due to a greater than 1 V hysteresis during charge and discharge. Previous work has suggested that this hysteresis might be intrinsic due to different reaction pathways. We employ galvanostatic intermittent titration (GITT), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) to study the reaction thermodynamics and kinetics. GITT experiments, when the electrode is allowed to rest for 72 h following a discharge or charge step, show that the hysteresis is 280 mV, in contrast to >1 V observed previously with slow rate charge and discharge experiments. CV results obtained in different potential ranges indicate that the apparent hysteresis is mostly due to the large overpotential needed to overcome the energy barrier for the nucleation of the LiF/Fe composite phases. EIS results are consistent with the forma...

86 citations

Journal ArticleDOI
TL;DR: In this paper, the authors measured capacity losses for 1.5-Ah Li-ion batteries with a mixture of Li-Ni-Co-Mn oxide (NCM) + Li-mn oxide spinel (LMO) as positive electrode material and a graphite negative electrode.

80 citations

Journal ArticleDOI
TL;DR: In this nanocomposite approach, the silica matrix is designed to be sufficiently porous for substrate molecules to have access to the enzyme and yet provides a protective cage for immobilization without affecting biological activity.
Abstract: Bilirubin oxidase encapsulated within a silica sol–gel/carbon nanotube composite electrode effectively catalyzed the reduction of molecular oxygen into water through direct electron transfer at the carbon nanotube electrode surface. In this nanocomposite approach, the silica matrix is designed to be sufficiently porous for substrate molecules to have access to the enzyme and yet provides a protective cage for immobilization without affecting biological activity. The incorporation of carbon nanotubes adds electrical connectivity and increases active electrode surface area. The standard surface electron transfer rate constant was calculated to be 59 s−1 which indicates that the carbon nanotube side walls are primarily responsible for electron transfer. The use of direct electron transfer processes simplifies biofuel cell fabrication by eliminating the need for redox mediator and ion-conducting separators.

77 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: 2D nanosheets, composed of a few Ti 3 C 2 layers and conical scrolls, produced by the room temperature exfoliation of Ti 3 AlC 2 in hydrofl uoric acid are reported, which opens a door to the synthesis of a large number of other 2D crystals.
Abstract: Currently, however, there are relatively few such atomically layered solids. [ 2–5 ] Here, we report on 2D nanosheets, composed of a few Ti 3 C 2 layers and conical scrolls, produced by the room temperature exfoliation of Ti 3 AlC 2 in hydrofl uoric acid. The large elastic moduli predicted by ab initio simulation, and the possibility of varying their surface chemistries (herein they are terminated by hydroxyl and/or fl uorine groups) render these nanosheets attractive as polymer composite fi llers. Theory also predicts that their bandgap can be tuned by varying their surface terminations. The good conductivity and ductility of the treated powders suggest uses in Li-ion batteries, pseudocapacitors, and other electronic applications. Since Ti 3 AlC 2 is a member of a 60 + group of layered ternary carbides and nitrides known as the MAX phases, this discovery opens a door to the synthesis of a large number of other 2D crystals. Arguably the most studied freestanding 2D material is graphene, which was produced by mechanical exfoliation into single-layers in 2004. [ 1 ] Some other layered materials, such as hexagonal BN, [ 2 ] transition metal oxides, and hydroxides, [ 4 ] as well as clays, [ 3 ] have also been exfoliated into 2D sheets. Interestingly, exfoliated MoS 2 single layers were reported as early as in 1986. [ 5 ] Graphene is fi nding its way to applications ranging from supercapacitor electrodes [ 6 ] to reinforcement in composites. [ 7 ] Although graphene has attracted more attention than all other 2D materials combined, its simple chemistry and the weak van der Waals bonding between layers in multilayer structures limit its use. Complex, layered structures that contain more than one element may offer new properties because they

6,846 citations

Journal ArticleDOI
01 Aug 2014-Science
TL;DR: Perovskite films received a boost in photovoltaic efficiency through controlled formation of charge-generating films and improved current transfer to the electrodes and low-temperature processing steps allowed the use of materials that draw current out of the perovskites layer more efficiently.
Abstract: Advancing perovskite solar cell technologies toward their theoretical power conversion efficiency (PCE) requires delicate control over the carrier dynamics throughout the entire device. By controlling the formation of the perovskite layer and careful choices of other materials, we suppressed carrier recombination in the absorber, facilitated carrier injection into the carrier transport layers, and maintained good carrier extraction at the electrodes. When measured via reverse bias scan, cell PCE is typically boosted to 16.6% on average, with the highest efficiency of ~19.3% in a planar geometry without antireflective coating. The fabrication of our perovskite solar cells was conducted in air and from solution at low temperatures, which should simplify manufacturing of large-area perovskite devices that are inexpensive and perform at high levels.

5,789 citations

Journal ArticleDOI
24 Jun 2011-Science
TL;DR: This work synthesized a porous carbon with a Brunauer-Emmett-Teller surface area, a high electrical conductivity, and a low oxygen and hydrogen content that has high values of gravimetric capacitance and energy density with organic and ionic liquid electrolytes.
Abstract: Supercapacitors, also called ultracapacitors or electrochemical capacitors, store electrical charge on high-surface-area conducting materials. Their widespread use is limited by their low energy storage density and relatively high effective series resistance. Using chemical activation of exfoliated graphite oxide, we synthesized a porous carbon with a Brunauer-Emmett-Teller surface area of up to 3100 square meters per gram, a high electrical conductivity, and a low oxygen and hydrogen content. This sp 2 -bonded carbon has a continuous three-dimensional network of highly curved, atom-thick walls that form primarily 0.6- to 5-nanometer-width pores. Two-electrode supercapacitor cells constructed with this carbon yielded high values of gravimetric capacitance and energy density with organic and ionic liquid electrolytes. The processes used to make this carbon are readily scalable to industrial levels.

5,486 citations

Journal ArticleDOI
TL;DR: In this article, a review of the key technological developments and scientific challenges for a broad range of Li-ion battery electrodes is presented, and the potential/capacity plots are used to compare many families of suitable materials.

5,057 citations

Journal ArticleDOI
TL;DR: This Review introduces several typical energy storage systems, including thermal, mechanical, electromagnetic, hydrogen, and electrochemical energy storage, and the current status of high-performance hydrogen storage materials for on-board applications and electrochemicals for lithium-ion batteries and supercapacitors.
Abstract: [Liu, Chang; Li, Feng; Ma, Lai-Peng; Cheng, Hui-Ming] Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China.;Cheng, HM (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Peoples R China;cheng@imr.ac.cn

4,105 citations