Jonathan V. Selinger

Bio: Jonathan V. Selinger is an academic researcher from Liquid Crystal Institute. The author has contributed to research in topics: Liquid crystal & Landau theory. The author has an hindex of 42, co-authored 151 publications receiving 6467 citations. Previous affiliations of Jonathan V. Selinger include Kent State University & University of California, Los Angeles.

Thermal Conductivity and Particle Agglomeration in Alumina Nanofluids: Experiment and Theory

Abstract: In recent years many experimentalists have reported an anomalously enhanced thermal conductivity in liquid suspensions of nanoparticles. Despite the importance of this effect for heat transfer applications, no agreement has emerged about the mechanism of this phenomenon, or even about the experimentally observed magnitude of the enhancement. To address these issues, this paper presents a combined experimental and theoretical study of heat conduction and particle agglomeration in nanofluids. On the experimental side, nanofluids of alumina particles in water and ethylene glycol are characterized using thermal conductivity measurements, viscosity measurements, dynamic light scattering, and other techniques. The results show that the particles are agglomerated, with an agglomeration state that evolves in time. The data also show that the thermal conductivity enhancement is within the range predicted by effective medium theory. On the theoretical side, a model is developed for heat conduction through a fluid containing nanoparticles and agglomerates of various geometries. The calculations show that elongated and dendritic structures are more efficient in enhancing the thermal conductivity than compact spherical structures of the same volume fraction, and that surface (Kapitza) resistance is the major factor resulting in the lower than effective medium conductivities measured in our experiments. Together, these results imply that the geometry, agglomeration state, and surface resistance of nanoparticles are the main variables controlling thermal conductivity enhancement in nanofluids.

The Macromolecular Route to Chiral Amplification.

Abstract: Cooperative phenomena, described by one-dimensional statistical physical methods, are observed between the enantiomeric characteristics of monomeric materials and the polymers they produce. The effect of minute energies associated with this amplified chirality, although currently not interpretable, can be easily measured. Nonlinear relationships between enantiomeric excess or enantiomeric content and polymer properties may offer the possibility of developing chiral catalysts and chiral chromatographic materials in which the burden of large enantiomeric excess or content may be considerably alleviated. New approaches to information and sensor technology may become possible.

Theory of Self-Assembled Tubules and Helical Ribbons

Abstract: Many types of amphiphilic molecules self-assemble in solution to form cylindrical tubules and helical ribbons. Some examples include diacetylenic lipids, amide amphiphiles, bile, and diblock copolymers. Researchers have proposed a variety of models to explain the formation of these high-curvature structures. These models can be divided into two broad categories: models based on the chiral elastic properties of membranes, and models based on other effects, including electrostatic interactions, elasticity of orientational order, and spontaneous curvature. In this paper, we review the range of theoretical approaches and compare them with relevant experiments. We argue that the category of models based on chiral elastic properties provides the most likely explanation of current experimental results, and we propose further theoretical and experimental research to give a more detailed test of these models.

Shape selection of twist-nematic-elastomer ribbons

Abstract: How microscopic chirality is reflected in macroscopic scale to form various chiral shapes, such as straight helicoids and spiral ribbons, and how the degree of macroscopic chirality can be controlled are a focus of studies on the shape formation of many biomaterials and supramolecular systems. This article investigates both experimentally and theoretically how the chiral arrangement of liquid crystal mesogens in twist-nematic-elastomer films induces the formation of helicoids and spiral ribbons because of the coupling between the liquid crystalline order and the elasticity. It is also shown that the pitch of the formed ribbons can be tuned by temperature variation. The results of this study will facilitate the understanding of physics for the shape formation of chiral materials and the designing of new structures on basis of microscopic chirality.

Accordion-like Actuators of Multiple 3D Patterned Liquid Crystal Polymer Films

Abstract: This work describes the fabrication, characterization, and modelling of liquid crystalline polymer network films with a multiple patterned 3D nematic director profile, a stimuli-responsive material that exhibits complex mechanical actuation under change of temperature or pH. These films have a discrete alternating striped or checkerboard director profile in the plane, and a 90-degree twist through the depth of the film. When actuated via heating, the striped films deform into accordion-like folds, while the film patterned with a checkerboard microstructure buckles out-of-plane. Furthermore, striped films are fabricated so that they also deform into an accordion shaped fold, by a change of pH in an aqueous environment. Three-dimensional finite element simulations and elasticity analysis provide insight into the dependence of shape evolution on director microstructure and the sample's aspect ratio.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Fabrication of novel biomaterials through molecular self-assembly.

Abstract: Two complementary strategies can be used in the fabrication of molecular biomaterials. In the 'top-down' approach, biomaterials are generated by stripping down a complex entity into its component parts (for example, paring a virus particle down to its capsid to form a viral cage). This contrasts with the 'bottom-up' approach, in which materials are assembled molecule by molecule (and in some cases even atom by atom) to produce novel supramolecular architectures. The latter approach is likely to become an integral part of nanomaterials manufacture and requires a deep understanding of individual molecular building blocks and their structures, assembly properties and dynamic behaviors. Two key elements in molecular fabrication are chemical complementarity and structural compatibility, both of which confer the weak and noncovalent interactions that bind building blocks together during self-assembly. Using natural processes as a guide, substantial advances have been achieved at the interface of nanomaterials and biology, including the fabrication of nanofiber materials for three-dimensional cell culture and tissue engineering, the assembly of peptide or protein nanotubes and helical ribbons, the creation of living microlenses, the synthesis of metal nanowires on DNA templates, the fabrication of peptide, protein and lipid scaffolds, the assembly of electronic materials by bacterial phage selection, and the use of radiofrequency to regulate molecular behaviors.

Molecular self-assembly and nanochemistry: A chemical strategy for the synthesis of nanostructures

Abstract: Molecular self-assembly is the spontaneous association of molecules under equilibrium conditions into stable, structurally well-defined aggregates joined by noncovalent bonds. Molecular self-assembly is ubiquitous in biological systems and underlies the formation of a wide variety of complex biological structures. Understanding self-assembly and the associated noncovalent interactions that connect complementary interacting molecular surfaces in biological aggregates is a central concern in structural biochemistry. Self-assembly is also emerging as a new strategy in chemical synthesis, with the potential of generating nonbiological structures with dimensions of 1 to 10(2) nanometers (with molecular weights of 10(4) to 10(10) daltons). Structures in the upper part of this range of sizes are presently inaccessible through chemical synthesis, and the ability to prepare them would open a route to structures comparable in size (and perhaps complementary in function) to those that can be prepared by microlithography and other techniques of microfabrication.

Synthetic molecular motors and mechanical machines.

Abstract: The widespread use of controlled molecular-level motion in key natural processes suggests that great rewards could come from bridging the gap between the present generation of synthetic molecular systems, which by and large rely upon electronic and chemical effects to carry out their functions, and the machines of the macroscopic world, which utilize the synchronized movements of smaller parts to perform specific tasks. This is a scientific area of great contemporary interest and extraordinary recent growth, yet the notion of molecular-level machines dates back to a time when the ideas surrounding the statistical nature of matter and the laws of thermodynamics were first being formulated. Here we outline the exciting successes in taming molecular-level movement thus far, the underlying principles that all experimental designs must follow, and the early progress made towards utilizing synthetic molecular structures to perform tasks using mechanical motion. We also highlight some of the issues and challenges that still need to be overcome.