Showing papers by "Jong Hyun Ahn published in 2019"

All MoS2-Based Large Area, Skin-Attachable Active-Matrix Tactile Sensor.

Abstract: Large-area, ultrathin flexible tactile sensors with conformal adherence are becoming crucial for advances in wearable electronics, electronic skins and biorobotics. However, normal passive tactile sensors suffer from high crosstalk, resulting in inaccurate sensing, which consequently limits their use in such advanced applications. Active-matrix-driven tactile sensors could potentially overcome such hurdles, but it demands the high performance and reliable operations of the thin-film-transistor array that could efficiently control integrated pressure gauges. Herein, we utilized the benefit of the semiconducting and mechanical excellence of MoS2 and placed it between high-k Al2O3 dielectric sandwich layers to achieve the high and reliable performance of MoS2-based back-plane circuitry and strain sensor. This strategical combination reduces the fabrication complexity and enables the demonstration of an all MoS2-based large area (8 × 8 array) active-matrix tactile sensor offering a wide sensing range (1–120 k...

Stretchable Electroluminescent Display Enabled by Graphene-Based Hybrid Electrode.

Abstract: Stretchable alternating-current electroluminescent (ACEL) devices are required due to their potential in wearable, biomedical, e-skin, robotic, lighting, and display applications; however, one of the main hurdles is to achieve uniform electroluminescence with an optimal combination of transparency, conductivity, and stretchability in electrodes. We therefore propose a fabrication scheme involving strategically combining two-dimensional graphene layers with a silver nanowire (Ag NW)-embedded PEDOT:PSS film. The developed hybrid electrode overcomes the limitations of commonly known metallic NWs and ionic conductor-based electrodes for ACEL applications. Furthermore, the potential of the hybrid electrode is realized in demonstrating large-area stretchable ACEL devices composed of an 8 × 8 passive array. The prototype ACEL passive array demonstrates efficient and uniform electroluminescence under high levels of mechanical deformation such as bending, rolling, twisting, and stretching.

Direct Synthesis of a Self-Assembled WSe2 /MoS2 Heterostructure Array and its Optoelectrical Properties.

Abstract: Functional van der Waals heterojunctions of transition metal dichalcogenides are emerging as a potential candidate for the basis of next-generation logic devices and optoelectronics. However, the complexity of synthesis processes so far has delayed the successful integration of the heterostructure device array within a large scale, which is necessary for practical applications. Here, a direct synthesis method is introduced to fabricate an array of self-assembled WSe2 /MoS2 heterostructures through facile solution-based directional precipitation. By manipulating the internal convection flow (i.e., Marangoni flow) of the solution, the WSe2 wires are selectively stacked over the MoS2 wires at a specific angle, which enables the formation of parallel- and cross-aligned heterostructures. The realized WSe2 /MoS2 -based p-n heterojunction shows not only high rectification (ideality factor: 1.18) but also promising optoelectrical properties with a high responsivity of 5.39 A W-1 and response speed of 16 µs. As a feasible application, a WSe2 /MoS2 -based photodiode array (10 × 10) is demonstrated, which proves that the photosensing system can detect the position and intensity of an external light source. The solution-based growth of hierarchical structures with various alignments could offer a method for the further development of large-area electronic and optoelectronic applications.

Atomic-Level Customization of 4 in. Transition Metal Dichalcogenide Multilayer Alloys for Industrial Applications.

Abstract: Despite many encouraging properties of transition metal dichalcogenides (TMDs), a central challenge in the realm of industrial applications based on TMD materials is to connect the large-scale synthesis and reproducible production of highly crystalline TMD materials. Here, the primary aim is to resolve simultaneously the two inversely related issues through the synthesis of MoS2(1-x) Se2x ternary alloys with customizable bichalcogen atomic (S and Se) ratio via atomic-level substitution combined with a solution-based large-area compatible approach. The relative concentration of bichalcogen atoms in the 2D alloy can be effectively modulated by altering the selenization temperature, resulting in 4 in. scale production of MoS1.62 Se0.38 , MoS1.37 Se0.63 , MoS1.15 Se0.85 , and MoS0.46 Se1.54 alloys, as well as MoS2 and MoSe2 . Comprehensive spectroscopic evaluations for vertical and lateral homogeneity in terms of heteroatom distribution in the large-scale 2D TMD alloys are implemented. Se-stimulated strain effects and a detailed mechanism for the Se substitution in the MoS2 crystal are further explored. Finally, the capability of the 2D alloy for industrial application in nanophotonic devices and hydrogen evolution reaction (HER) catalysts is validated. Substantial enhancements in the optoelectronic and HER performances of the 2D ternary alloy compared with those of its binary counterparts, including pure-phase MoS2 and MoSe2 , are unambiguously achieved.

Boosting ion dynamics through superwettable leaf-like film based on porous g-C 3 N 4 nanosheets for ionogel supercapacitors

Abstract: Ionic liquid (IL) electrolytes have enormous potential for the development of high energy density supercapacitors (SCs) owing to their wide potential windows, but ILs are plagued by sluggish ionic diffusion due to their high viscosity and large ion size. Exploiting superwettable electrodes possessing high compatibility with IL electrolytes remains challenging. Inspired by the biological characteristics observed in nature, a unique film electrode with a Monstera leaf-like nanostructure is synthesized and used to overcome the aforementioned bottleneck. Similar to the pores in Monstera leaves that allow the permeation of air and water vapor, the film electrode is based on porous g-C3N4 nanosheets (~1 nm thick) as ion-accessible “highway” channels, allowing ultrafast diffusion of IL ions. The film exhibits a high diffusion coefficient (3.68 × 10−10 m2 s−1), low activation energy (0.078 mJ mol−1) and extraordinary wettability in the IL electrolyte, indicating its superior IL ion dynamics. As a proof of concept, flexible ionogel SCs (FISCs) with tailorability and editability are fabricated, which exhibit a high energy density (10.5 mWh cm−3), high-power density, remarkable rate capability, and long-term durability, outperforming previously reported FISCs. Importantly, these FISCs can be effectively charged by harvesting sustainable power sources, particularly the rarely studied wind power, for practical applications. Battery alternatives known as supercapacitors can be fabricated into bendable devices that tap into wind power. Researchers looking to pack more energy into supercapacitors are replacing conventional electrolytes with ionic liquids made from viscous organic salts. Minjie Shi at the Jiangsu University of Science and Technology in Zhenjiang, China, and colleagues have designed a supercapacitor electrode that accelerates the sluggish movements of ionic liquids by mimicking channels used by leaves to transport air and water vapor. The team’s electrode contains tiny pathways for ionic liquids to move, thanks to a structure of porous carbon nitride nanosheets held together by carbon nanotube composites. Supercapacitors made with the new electrode had improved performance compared to other ionic liquid-based devices, and could be used for energy-harvesting applications including bicycle-mounted recharging using miniature wind turbines. A bioinspired monstera leaf-like superwettable film with porous g-C3N4 nanosheets as ion-accessible channels has been developed, which shows favorable electrochemical kinetic behavior in ionic liquid electrolyte. As a proof-of-concept application, high performance flexible ionogel-based supercapacitors (FISCs) have been elaborately fabricated, which can be charged by harvesting renewable energy sources and effectively power to various portable electronics.

Controllable P- and N-Type Conversion of MoTe2 via Oxide Interfacial Layer for Logic Circuits.

Abstract: To realize basic electronic units such as complementary metal-oxide-semiconductor (CMOS) inverters and other logic circuits, the selective and controllable fabrication of p- and n-type transistors with a low Schottky barrier height is highly desirable. Herein, an efficient and nondestructive technique of electron-charge transfer doping by depositing a thin Al2 O3 layer on chemical vapor deposition (CVD)-grown 2H-MoTe2 is utilized to tune the doping from p- to n-type. Moreover, a type-controllable MoTe2 transistor with a low Schottky barrier height is prepared. The selectively converted n-type MoTe2 transistor from the p-channel exhibits a maximum on-state current of 10 µA, with a higher electron mobility of 8.9 cm2 V-1 s-1 at a drain voltage (Vds ) of 1 V with a low Schottky barrier height of 28.4 meV. To validate the aforementioned approach, a prototype homogeneous CMOS inverter is fabricated on a CVD-grown 2H-MoTe2 single crystal. The proposed inverter exhibits a high DC voltage gain of 9.2 with good dynamic behavior up to a modulation frequency of 1 kHz. The proposed approach may have potential for realizing future 2D transition metal dichalcogenide-based efficient and ultrafast electronic units with high-density circuit components under a low-dimensional regime.

Electronic Structure of Nonionic Surfactant-Modified PEDOT:PSS and Its Application in Perovskite Solar Cells with Reduced Interface Recombination.

Abstract: The interfacial properties of organolead halide perovskite solar cells (PSCs) affect the exciton and charge-transport dynamics significantly. Thus, proper modification of the interfaces between perovskite and charge-transport layers is an efficient method to increase the power conversion efficiency (PCE) of PSCs. In this work, we explore the effect of a nonionic surfactant, that is, Triton X-100 (TX) additive, in the poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) hole-transport layer. The electronic structure of TX-modified PEDOT:PSS is investigated with ultraviolet/X-ray photoelectron spectroscopy and X-ray absorption spectroscopy with various TX concentrations. The surface of the TX-modified PEDOT:PSS layer showed high TX content, and thus the semimetallic properties of PEDOT:PSS were suppressed conspicuously by its insulating nature. With the TX-modified PEDOT:PSS, the PCE of methylammonium lead iodide (MAPbI3) PSCs increased significantly. To elucidate the origin of the improved device performance, the electrical properties and photoluminescence were investigated comprehensively. Consequently, it was found that the TX additive inhibits interface recombination between PEDOT:PSS and MAPbI3, which is caused by the suppression of semimetallic properties of the PEDOT:PSS surface. Hence, we fabricated flexible PSCs successfully using a graphene electrode and TX-modified PEDOT:PSS.

Ultrasoft silicon nanomembranes: thickness-dependent effective elastic modulus

Abstract: For decades, silicon (Si) has been widely used for the mass production of microelectronic circuits. Recently, as the thickness has been reduced to the nanometer scale, its application has expanded to various fields, including flexible and transparent 2D semiconductors. For the reliable and reproducible operation of such large flexible and transparent devices, obtaining precise information about the mechanical properties of low dimensional Si is crucial. Here, we demonstrate that a 2 nm-thick Si nanomembrane (NM) exhibits an extremely low Young's modulus of 3.25 GPa, a two-order smaller value than that of the bulk counterpart. Our systematic measurement of thickness-controlled Si NMs reveals the existence of significant size effect: The effective modulus rapidly changes from 180 GPa to 3.25 GPa under 25 nm to 2 nm thickness reduction. Our theoretical modeling successfully provides physical insight into the unique stiff-to-soft transition and extremely low modulus. We further demonstrate that the modulus of Si NMs can be tailored precisely via the control of surface morphology of membrane. This work therefore provides a comprehensive picture of how and why originally hard & stiff Si deforms so softly in the ultrathin 2D geometry, and proposes a new strategy to design the mechanical properties at nanoscale dimensions.

Investigation on Metal–Oxide Graphene Field-Effect Transistors With Clamped Geometries

Abstract: In this work, we report on the design, fabrication and characterization of Metal-Oxide Graphene Field-effect Transistors (MOGFETs) exploiting novel clamped gate geometries aimed at enhancing the device transconductance. The fabricated devices employ clamped metal contacts also for source and drain, as well as an optimized graphene meandered pattern for source contacting, in order to reduce parasitic resistance. Our experimental results demonstrate that MOGFETs with the proposed structure show improved high frequency performance, in terms of maximum available gain and transition frequency values, as a consequence of the higher equivalent transconductance obtained.

Highly sensitive flow sensor

Abstract: The present invention relates to a highly sensitive flow sensor. The flow sensor comprises: first and second heaters which are disposed in an active layer formed on a silicon layer while being spaced apart from each other, so as to generate heat; a temperature sensor which is disposed between the first and second heaters in the active layer so as to detect the difference between temperatures at both ends thereof and convert the same into a voltage signal; and a control circuit which is formed in the active layer so as to transmit, to the first and second heaters, a feedback signal of the voltage signal received from the temperature sensor, wherein the control circuit comprises an electrical filter for receiving, as an input signal, the voltage signal from the temperature sensor and increasing, through filtering, the order of a signal output therefrom.

Graphene bio-device for electrotherapy

Abstract: A graphene bio-device for electrotherapy, includes: a flexible substrate; An electrode made of graphene on the flexible substrate; and an insulation layer on the graphene electrode; wherein the graphene bio-device comprises electrodes for ground, reference, recording and stimulation, wherein the graphene bio-device is measured corticography with low noise and alleviated seizure signals successfully by imposing electrical stimulation.