scispace - formally typeset
Search or ask a question
Author

Joshua E. Goldberger

Bio: Joshua E. Goldberger is an academic researcher from Ohio State University. The author has contributed to research in topics: Germanane & Graphane. The author has an hindex of 38, co-authored 108 publications receiving 15073 citations. Previous affiliations of Joshua E. Goldberger include National Center for Electron Microscopy & Lawrence Berkeley National Laboratory.


Papers
More filters
Journal ArticleDOI
17 Dec 2014-Langmuir
TL;DR: It is shown that changing the position of a single hydrophobic amino acid in short amphiphilic peptides can dramatically alter their pH-triggered self-assembly transitions and is proposed that moving the Isoleucine away from the tail enhances its ability to promote β-sheet formation instead of folding back into the palmitoyl core.
Abstract: While the ordering of amino acids in proteins and peptide-based materials is known to affect their folding patterns and supramolecular architectures, tailoring self-assembly behavior in stimuli responsive peptides by isomerizing a peptide sequence has not been extensively explored. Here, we show that changing the position of a single hydrophobic amino acid in short amphiphilic peptides can dramatically alter their pH-triggered self-assembly transitions. Using palmitoyl-IAAAEEEE-NH2 and palmitoyl-IAAAEEEEK(DO3A:Gd)-NH2 as controls, moving the Isoleucine away from the palmitoyl tail preferentially induces nanofiber formation over spherical micelles. Shifting the Isoleucine one residue away makes the transition pH more basic by 2 units. When in the third or fourth position, nanofibers are formed exclusively above 10 μM. We propose that moving the Isoleucine away from the tail enhances its ability to promote β-sheet formation instead of folding back into the palmitoyl core. These findings reveal a novel strat...

23 citations

Journal ArticleDOI
TL;DR: The model performs five times better than practitioners in the field at identifying layered materials and is comparable to or better than professional solid-state chemists, and semisupervised learning can offer benefits for materials design where labels for some of the materials are unknown.
Abstract: We discover the chemical composition of over 1000 materials that are likely to exhibit layered and 2D phases but have yet to be synthesized. This includes two materials our calculations indicate can exist in distinct structures with different band gaps, expanding the short list of 2D phase-change materials. Whereas databases of over 1000 layered materials have been reported, we provide the first full database of materials that are likely layered but are yet to be synthesized, providing a roadmap for the synthesis community. We accomplish this by combining physics with machine learning on experimentally obtained data and verify a subset of candidates using density functional theory. We find that our model performs five times better than practitioners in the field at identifying layered materials and is comparable to or better than professional solid-state chemists. Finally, we find that semisupervised learning can offer benefits for materials design where labels for some of the materials are unknown.

22 citations

Journal ArticleDOI
TL;DR: In this paper, the authors show that Re4Si7 has a transverse zxyT of 0.7 ± 0.15 at 980 K, a value that is on par with existing commercial longitudinal theremoelectrics.
Abstract: The principal challenges in current thermoelectric power generation modules are the availability of stable, diffusion-resistant, lossless electrical and thermal metal–semiconductor contacts that do not degrade at the hot end nor cause reductions in device efficiency. Transverse thermoelectric devices, in which a thermal gradient in a single material induces a perpendicular voltage, promise to overcome these problems. However, the measured material transverse thermoelectric efficiencies, zxyT, of nearly all materials to date has been far too low to confirm these advantages in an actual device. Here, we show that single crystals of Re4Si7, an air-stable, thermally robust, layered compound, have a transverse zxyT of 0.7 ± 0.15 at 980 K, a value that is on par with existing commercial longitudinal theremoelectrics today. Through constructing and characterizing a transverse power generation module, we prove that extrinsic losses through contact resistances are minimized in this geometry, and that no electrical contacts are needed at the hot side. This excellent transverse thermoelectric performance arises from the large, oppositely signed in-plane p-type and cross-plane n-type thermopowers. These large anisotropic thermopowers arise from thermal population of the highly anisotropic valence band and isotropic conduction band in this narrow gap semiconductor. Overall, this work establishes Re4Si7 as the “gold-standard” of transverse thermoelectrics, allowing future exploration of unique device architectures for waste heat recovery.

20 citations

Journal ArticleDOI
25 Jan 2011-ACS Nano
TL;DR: It is found that either increasing the concentration of surfactant or the water to dimethyl sulfoxide ratio of solutions used resulted in the suppression of bloomlike morphologies and enhanced the density of periodic domains on ITO substrates.
Abstract: One of the challenges in the synthesis of hybrid materials with nanoscale structure is to precisely control morphology across length scales. Using a one-step electrodeposition process on indium tin oxide (ITO) substrates followed by annealing, we report here the preparation of materials with preferentially oriented lamellar domains of electron donor surfactants and the semiconductor ZnO. We found that either increasing the concentration of surfactant or the water to dimethyl sulfoxide ratio of solutions used resulted in the suppression of bloomlike morphologies and enhanced the density of periodic domains on ITO substrates. Furthermore, by modifying the surface of the ITO substrate with the conductive polymer blend poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate), we were able to alter the orientation of these electrodeposited lamellar domains to be perpendicular to the substrate. The long-range orientation achieved was characterized by 2D grazing incidence small-angle X-ray scattering. This high d...

20 citations

Journal ArticleDOI
TL;DR: The design and synthesis of an oligothiophene molecule that noncovalently functionalizes carbon nanotubes to create a hybrid material for photovoltaic devices is reported.

20 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: This work reviews the historical development of Transition metal dichalcogenides, methods for preparing atomically thin layers, their electronic and optical properties, and prospects for future advances in electronics and optoelectronics.
Abstract: Single-layer metal dichalcogenides are two-dimensional semiconductors that present strong potential for electronic and sensing applications complementary to that of graphene.

13,348 citations

Journal ArticleDOI
25 Jul 2013-Nature
TL;DR: With steady improvement in fabrication techniques and using graphene’s springboard, van der Waals heterostructures should develop into a large field of their own.
Abstract: Fabrication techniques developed for graphene research allow the disassembly of many layered crystals (so-called van der Waals materials) into individual atomic planes and their reassembly into designer heterostructures, which reveal new properties and phenomena. Andre Geim and Irina Grigorieva offer a forward-looking review of the potential of layering two-dimensional materials into novel heterostructures held together by weak van der Waals interactions. Dozens of these one-atom- or one-molecule-thick crystals are known. Graphene has already been well studied but others, such as monolayers of hexagonal boron nitride, MoS2, WSe2, graphane, fluorographene, mica and silicene are attracting increasing interest. There are many other monolayers yet to be examined of course, and the possibility of combining graphene with other crystals adds even further options, offering exciting new opportunities for scientific exploration and technological innovation. Research on graphene and other two-dimensional atomic crystals is intense and is likely to remain one of the leading topics in condensed matter physics and materials science for many years. Looking beyond this field, isolated atomic planes can also be reassembled into designer heterostructures made layer by layer in a precisely chosen sequence. The first, already remarkably complex, such heterostructures (often referred to as ‘van der Waals’) have recently been fabricated and investigated, revealing unusual properties and new phenomena. Here we review this emerging research area and identify possible future directions. With steady improvement in fabrication techniques and using graphene’s springboard, van der Waals heterostructures should develop into a large field of their own.

8,162 citations

Journal ArticleDOI
TL;DR: The interest in nanoscale materials stems from the fact that new properties are acquired at this length scale and, equally important, that these properties are equally important.
Abstract: The interest in nanoscale materials stems from the fact that new properties are acquired at this length scale and, equally important, that these properties * To whom correspondence should be addressed. Phone, 404-8940292; fax, 404-894-0294; e-mail, mostafa.el-sayed@ chemistry.gatech.edu. † Case Western Reserve UniversitysMillis 2258. ‡ Phone, 216-368-5918; fax, 216-368-3006; e-mail, burda@case.edu. § Georgia Institute of Technology. 1025 Chem. Rev. 2005, 105, 1025−1102

6,852 citations

Journal ArticleDOI
TL;DR: This work introduces a version of the dye-sensitized cell in which the traditional nanoparticle film is replaced by a dense array of oriented, crystalline ZnO nanowires, which features a surface area up to one-fifth as large as a nanoparticle cell.
Abstract: Excitonic solar cells1—including organic, hybrid organic–inorganic and dye-sensitized cells (DSCs)—are promising devices for inexpensive, large-scale solar energy conversion. The DSC is currently the most efficient2 and stable3 excitonic photocell. Central to this device is a thick nanoparticle film that provides a large surface area for the adsorption of light-harvesting molecules. However, nanoparticle DSCs rely on trap-limited diffusion for electron transport, a slow mechanism that can limit device efficiency, especially at longer wavelengths. Here we introduce a version of the dye-sensitized cell in which the traditional nanoparticle film is replaced by a dense array of oriented, crystalline ZnO nanowires. The nanowire anode is synthesized by mild aqueous chemistry and features a surface area up to one-fifth as large as a nanoparticle cell. The direct electrical pathways provided by the nanowires ensure the rapid collection of carriers generated throughout the device, and a full Sun efficiency of 1.5% is demonstrated, limited primarily by the surface area of the nanowire array.

5,308 citations

Journal ArticleDOI
26 Mar 2013-ACS Nano
TL;DR: The properties and advantages of single-, few-, and many-layer 2D materials in field-effect transistors, spin- and valley-tronics, thermoelectrics, and topological insulators, among many other applications are highlighted.
Abstract: Graphene’s success has shown that it is possible to create stable, single and few-atom-thick layers of van der Waals materials, and also that these materials can exhibit fascinating and technologically useful properties. Here we review the state-of-the-art of 2D materials beyond graphene. Initially, we will outline the different chemical classes of 2D materials and discuss the various strategies to prepare single-layer, few-layer, and multilayer assembly materials in solution, on substrates, and on the wafer scale. Additionally, we present an experimental guide for identifying and characterizing single-layer-thick materials, as well as outlining emerging techniques that yield both local and global information. We describe the differences that occur in the electronic structure between the bulk and the single layer and discuss various methods of tuning their electronic properties by manipulating the surface. Finally, we highlight the properties and advantages of single-, few-, and many-layer 2D materials in...

4,123 citations