Joshua J. Engelsma

Bio: Joshua J. Engelsma is an academic researcher from Michigan State University. The author has contributed to research in topics: Fingerprint recognition & Fingerprint. The author has an hindex of 8, co-authored 29 publications receiving 257 citations.

Learning a Fixed-Length Fingerprint Representation

Abstract: We present DeepPrint, a deep network, which learns to extract fixed-length fingerprint representations of only 200 bytes. DeepPrint incorporates fingerprint domain knowledge, including alignment and minutiae detection, into the deep network architecture to maximize the discriminative power of its representation. The compact, DeepPrint representation has several advantages over the prevailing variable length minutiae representation which (i) requires computationally expensive graph matching techniques, (ii) is difficult to secure using strong encryption schemes (e.g., homomorphic encryption), and (iii) has low discriminative power in poor quality fingerprints where minutiae extraction is unreliable. We benchmark DeepPrint against two top performing COTS SDKs (Verifinger and Innovatrics) from the NIST and FVC evaluations. Coupled with a re-ranking scheme, the DeepPrint rank-1 search accuracy on the NIST SD4 dataset against a gallery of 1.1 million fingerprints is comparable to the top COTS matcher, but it is significantly faster ( DeepPrint: 98.80% in 0.3 seconds vs. COTS A: 98.85% in 27 seconds). To the best of our knowledge, the DeepPrint representation is the most compact and discriminative fixed-length fingerprint representation reported in the academic literature.

RaspiReader: Open Source Fingerprint Reader

Abstract: We open source an easy to assemble, spoof resistant, high resolution, optical fingerprint reader, called RaspiReader, using ubiquitous components. By using our open source STL files and software, RaspiReader can be built in under one hour for only US $175. As such, RaspiReader provides the fingerprint research community a seamless and simple method for quickly prototyping new ideas involving fingerprint reader hardware. In particular, we posit that this open source fingerprint reader will facilitate the exploration of novel fingerprint spoof detection techniques involving both hardware and software. We demonstrate one such spoof detection technique by specially customizing RaspiReader with two cameras for fingerprint image acquisition. One camera provides high contrast, frustrated total internal reflection (FTIR) fingerprint images, and the other outputs direct images of the finger in contact with the platen. Using both of these image streams, we extract complementary information which, when fused together and used for spoof detection, results in marked performance improvement over previous methods relying only on grayscale FTIR images provided by COTS optical readers. Finally, fingerprint matching experiments between images acquired from the FTIR output of RaspiReader and images acquired from a COTS reader verify the interoperability of the RaspiReader with existing COTS optical readers.

Universal 3D Wearable Fingerprint Targets: Advancing Fingerprint Reader Evaluations

Abstract: We present the design and manufacturing of high-fidelity universal 3D fingerprint targets, which can be imaged on a variety of fingerprint sensing technologies, namely, capacitive, contact optical, and contactless optical. Universal 3D fingerprint targets enable, for the first time, not only a repeatable and controlled evaluation of fingerprint readers but also the ability to conduct fingerprint reader interoperability studies. Fingerprint reader interoperability refers to how robust fingerprint recognition systems are to variations in the images acquired by different types of fingerprint readers. To build universal 3D fingerprint targets, we adopt a molding and casting framework consisting of: 1) digital mapping of fingerprint images to a negative mold; 2) CAD modeling a scaffolding system to hold the negative mold; 3) fabricating the mold and scaffolding system with a high resolution 3D printer; 4) producing or mixing a material with similar electrical, optical, and mechanical properties to that of the human finger; and 5) fabricating a 3D fingerprint target using controlled casting. Our experiments conducted with personal identity verification and Appendix F certified optical (contact and contactless) and capacitive fingerprint readers demonstrate the usefulness of universal 3D fingerprint targets for controlled and repeatable fingerprint reader evaluations and also fingerprint reader interoperability studies.

Generalizing Fingerprint Spoof Detector: Learning a One-Class Classifier

Abstract: Prevailing fingerprint recognition systems are vulnerable to spoof attacks. To mitigate these attacks, automated spoof detectors are trained to distinguish a set of live or bona fide fingerprints from a set of known spoof fingerprints. Despite their success, spoof detectors remain vulnerable when exposed to attacks from spoofs made with materials not seen during training of the detector. To alleviate this shortcoming, we approach spoof detection as a one-class classification problem. The goal is to train a spoof detector on only the live fingerprints such that once the concept of "live" has been learned, spoofs of any material can be rejected. We accomplish this through training multiple generative adversarial networks (GANS) on live fingerprint images acquired with the open source, dual-camera, 1900 ppi RaspiReader fingerprint reader. Our experimental results, conducted on 5.5K spoof images (from 12 materials) and 11.8K live images show that the proposed approach improves the cross-material spoof detection performance over state-of-the-art one-class and binary class spoof detectors on 11 of 12 testing materials and 7 of 12 testing materials, respectively.

Universal 3D Wearable Fingerprint Targets: Advancing Fingerprint Reader Evaluations

Abstract: We present the design and manufacturing of high fidelity universal 3D fingerprint targets, which can be imaged on a variety of fingerprint sensing technologies, namely capacitive, contact-optical, and contactless-optical. Universal 3D fingerprint targets enable, for the first time, not only a repeatable and controlled evaluation of fingerprint readers, but also the ability to conduct fingerprint reader interoperability studies. Fingerprint reader interoperability refers to how robust fingerprint recognition systems are to variations in the images acquired by different types of fingerprint readers. To build universal 3D fingerprint targets, we adopt a molding and casting framework consisting of (i) digital mapping of fingerprint images to a negative mold, (ii) CAD modeling a scaffolding system to hold the negative mold, (iii) fabricating the mold and scaffolding system with a high resolution 3D printer, (iv) producing or mixing a material with similar electrical, optical, and mechanical properties to that of the human finger, and (v) fabricating a 3D fingerprint target using controlled casting. Our experiments conducted with PIV and Appendix F certified optical (contact and contactless) and capacitive fingerprint readers demonstrate the usefulness of universal 3D fingerprint targets for controlled and repeatable fingerprint reader evaluations and also fingerprint reader interoperability studies.

Advanced Encryption Standard (AES).

Abstract: Im Jahre 1977 wurde der „Data Encryption Algorithm“ (DEA) vom „National Bureau of Standards“ (NBS, später „National Institute of Standards and Technology“ – NIST) zum amerikanischen Verschlüsselungsstandard für Bundesbehörden erklärt [NBS_77]. 1981 folgte die Verabschiedung der DEA-Spezifikation als ANSI-Standard „DES“ [ANSI_81]. Die Empfehlung des DES als StandardVerschlüsselungsverfahren wurde auf fünf Jahre befristet und 1983, 1988 und 1993 um jeweils weitere fünf Jahre verlängert. Derzeit liegt eine Neufassung des NISTStandards vor [NIST_99], in dem der DES für weitere fünf Jahre übergangsweise zugelassen sein soll, aber die Verwendung von Triple-DES empfohlen wird: eine dreifache Anwendung des DES mit drei verschiedenen Schlüsseln (effektive Schlüssellänge: 168 bit) [NIST_99]. Der DES basiert auf einer von Horst Feistel bei IBM entwickelten Blockchiffre („Lucipher“) mit einer Schlüssellänge von 128 bit. Da die amerikanische „National Security Agency“ (NSA) dafür gesorgt hatte, daß der DES eine Schlüssellänge von lediglich 64 bit besitzt, von denen nur 56 bit relevant sind, und spezielle Substitutionsboxen (den „kryptographischen Kern“ des Verfahrens) erhielt, deren Konstruktionskriterien von der NSA nicht veröffentlicht wurden, war das Verfahren von Beginn an umstritten. Kritiker nahmen an, daß es eine geheime „Trapdoor“ in dem Verfahren gäbe, die der NSA eine OnlineEntschlüsselung auch ohne Kenntnis des Schlüssels erlauben würde. Zwar ließ sich dieser Verdacht nicht erhärten, aber sowohl die Zunahme von Rechenleistung als auch die Parallelisierung von Suchalgorithmen machen heute eine Schlüssellänge von 56 bit zum Sicherheitsrisiko. Zuletzt konnte 1998 mit einer von der „Electronic Frontier Foundation“ (EFF) entwickelten Spezialmaschine mit 1.800 parallel arbeitenden, eigens entwickelten Krypto-Prozessoren ein DES-Schlüssel in einer Rekordzeit von 2,5 Tagen gefunden werden. Um einen Nachfolger für den DES zu finden, kündigte das NIST am 2. Januar 1997 die Suche nach einem „Advanced Encryption Standard“ (AES) an. Ziel dieser Initiative ist, in enger Kooperation mit Forschung und Industrie ein symmetrisches Verschlüsselungsverfahren zu finden, das geeignet ist, bis weit ins 21. Jahrhundert hinein amerikanische Behördendaten wirkungsvoll zu verschlüsseln. Dazu wurde am 12. September 1997 ein offizieller „Call for Algorithm“ ausgeschrieben. An die vorzuschlagenden symmetrischen Verschlüsselungsalgorithmen wurden die folgenden Anforderungen gestellt: nicht-klassifiziert und veröffentlicht, weltweit lizenzfrei verfügbar, effizient implementierbar in Hardund Software, Blockchiffren mit einer Blocklänge von 128 bit sowie Schlüssellängen von 128, 192 und 256 bit unterstützt. Auf der ersten „AES Candidate Conference“ (AES1) veröffentlichte das NIST am 20. August 1998 eine Liste von 15 vorgeschlagenen Algorithmen und forderte die Fachöffentlichkeit zu deren Analyse auf. Die Ergebnisse wurden auf der zweiten „AES Candidate Conference“ (22.-23. März 1999 in Rom, AES2) vorgestellt und unter internationalen Kryptologen diskutiert. Die Kommentierungsphase endete am 15. April 1999. Auf der Basis der eingegangenen Kommentare und Analysen wählte das NIST fünf Kandidaten aus, die es am 9. August 1999 öffentlich bekanntmachte: MARS (IBM) RC6 (RSA Lab.) Rijndael (Daemen, Rijmen) Serpent (Anderson, Biham, Knudsen) Twofish (Schneier, Kelsey, Whiting, Wagner, Hall, Ferguson).

Fingerprint Spoof Buster: Use of Minutiae-Centered Patches

Abstract: The primary purpose of a fingerprint recognition system is to ensure a reliable and accurate user authentication, but the security of the recognition system itself can be jeopardized by spoof attacks. This paper addresses the problem of developing accurate, generalizable, and efficient algorithms for detecting fingerprint spoof attacks. Specifically, we propose a deep convolutional neural network-based approach utilizing local patches centered and aligned using fingerprint minutiae. Experimental results on three public-domain LivDet datasets (2011, 2013, and 2015) show that the proposed approach provides the state-of-the-art accuracies in fingerprint spoof detection for intra-sensor, cross-material, cross-sensor, as well as cross-dataset testing scenarios. For example, in LivDet 2015, the proposed approach achieves 99.03% average accuracy over all sensors compared with 95.51% achieved by the LivDet 2015 competition winners. In addition, two new fingerprint presentation attack datasets containing more than 20,000 images, using two different fingerprint readers, and over 12 different spoof fabrication materials are collected. We also present a graphical user interface, called Fingerprint Spoof Buster, that allows the operator to visually examine the local regions of the fingerprint highlighted as live or spoof, instead of relying on only a single score as output by the traditional approaches.

Learning One Class Representations for Face Presentation Attack Detection Using Multi-Channel Convolutional Neural Networks

Abstract: Face recognition has evolved as a widely used biometric modality. However, its vulnerability against presentation attacks poses a significant security threat. Though presentation attack detection (PAD) methods try to address this issue, they often fail in generalizing to unseen attacks. In this work, we propose a new framework for PAD using a one-class classifier, where the representation used is learned with a Multi-Channel Convolutional Neural Network ( MCCNN ). A novel loss function is introduced, which forces the network to learn a compact embedding for bonafide class while being far from the representation of attacks. A one-class Gaussian Mixture Model is used on top of these embeddings for the PAD task. The proposed framework introduces a novel approach to learn a robust PAD system from bonafide and available (known) attack classes. This is particularly important as collecting bonafide data and simpler attacks are much easier than collecting a wide variety of expensive attacks. The proposed system is evaluated on the publicly available WMCA multi-channel face PAD database, which contains a wide variety of 2D and 3D attacks. Further, we have performed experiments with MLFP and SiW-M datasets using RGB channels only. Superior performance in unseen attack protocols shows the effectiveness of the proposed approach. Software, data, and protocols to reproduce the results are made available publicly.