Jun Luo

Bio: Jun Luo is an academic researcher from Shanghai University. The author has contributed to research in topics: Thermoelectric effect & Thermoelectric materials. The author has an hindex of 31, co-authored 130 publications receiving 3195 citations. Previous affiliations of Jun Luo include Chinese Academy of Sciences & University of Science and Technology Beijing.

All-Dielectric Metasurfaces for Simultaneous Giant Circular Asymmetric Transmission and Wavefront Shaping Based on Asymmetric Photonic Spin–Orbit Interactions

Abstract: The control of polarization and wavefront plays an important role in many optical systems. In this work, a monolayer metasurface is proposed to simultaneously realize circular asymmetric transmission (AT) and wavefront shaping based on asymmetric spin–orbit interactions. Circularly polarized incidence, accompanied with arbitrary wavefront modulation, experiences spin-selected destructive or constructive interference. An extinction ratio of ≈10:1 and an AT parameter of ≈0.69 at 9.6 µm, as well as a full width half-maximum of ≈2.9 µm (≈30% of the peak wavelength), are measured with the designed metasurface. These measured results are more than four times of those achieved with previous monolayer chiral structures. As far as it is known, this is the first report on the realization of simultaneous giant AT and arbitrary wavefront modulation with only one metasurface. Due to its fabrication simplicity and the multifunctionality of the designed metasurface, this work may provide a promising route to replace bulky cascading optical components with only one ultrathin metasurface for chiroptical spectroscopy, chiral imaging, optical communication, and so forth.

Discovery of TaFeSb-based half-Heuslers with high thermoelectric performance

Abstract: Discovery of thermoelectric materials has long been realized by the Edisonian trial and error approach. However, recent progress in theoretical calculations, including the ability to predict structures of unknown phases along with their thermodynamic stability and functional properties, has enabled the so-called inverse design approach. Compared to the traditional materials discovery, the inverse design approach has the potential to substantially reduce the experimental efforts needed to identify promising compounds with target functionalities. By adopting this approach, here we have discovered several unreported half-Heusler compounds. Among them, the p-type TaFeSb-based half-Heusler demonstrates a record high ZT of ~1.52 at 973 K. Additionally, an ultrahigh average ZT of ~0.93 between 300 and 973 K is achieved. Such an extraordinary thermoelectric performance is further verified by the heat-to-electricity conversion efficiency measurement and a high efficiency of ~11.4% is obtained. Our work demonstrates that the TaFeSb-based half-Heuslers are highly promising for thermoelectric power generation. The discovery of thermodynamically stable thermoelectric materials for power generation has relied on empirical methods that were not effective. Here, the authors apply the inverse design approach to identify and experimentally realize TaFeSb-based half Heuslers with high thermoelectric performance.

Synthesis of Single-Crystal Tetragonal α-MnO2 Nanotubes

Abstract: Single-crystal tetragonal α-MnO2 nanotubes have been successfully synthesized by a facile hydrothermal treatment of KMnO4 in the hydrochloric acid solution. The sample has been characterized by X-ray powder diffraction, field emission scanning electron microscopy, transmission electron microscopy, and orientation dependent Raman spectroscopy, which indicates the nanotubes have high-quality crystalline and shape-dependent optical properties. The morphology evolution of the sample reveals that the nanotubes are formed via the solid nanorod by a chemical etching process.

A review of non-contact micro- and nano-printing technologies

Abstract: Printing technologies have undergone signficant development because they are an enabler in science and engineering research; they also have significant practical applications in manufacturing. Micro- and nano-printing techniques have found a number of applications in electronics, biotechnology, and material synthesis/patterning. In this review, we look at the important printing methods, including high precision traditional printing methods as well as recently emerging techniques. We also discuss the materials that are printable by these technologies, the challenges for future development, and the applications of micro- and nano-printing.

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Abstract: Freedom of design, mass customisation, waste minimisation and the ability to manufacture complex structures, as well as fast prototyping, are the main benefits of additive manufacturing (AM) or 3D printing. A comprehensive review of the main 3D printing methods, materials and their development in trending applications was carried out. In particular, the revolutionary applications of AM in biomedical, aerospace, buildings and protective structures were discussed. The current state of materials development, including metal alloys, polymer composites, ceramics and concrete, was presented. In addition, this paper discussed the main processing challenges with void formation, anisotropic behaviour, the limitation of computer design and layer-by-layer appearance. Overall, this paper gives an overview of 3D printing, including a survey on its benefits and drawbacks as a benchmark for future research and development.

Co3O4 Nanowire@MnO2 Ultrathin Nanosheet Core/Shell Arrays: A New Class of High‐Performance Pseudocapacitive Materials

Abstract: With the ever-increasing power and energy needs in applications ranging from next-generation plug-in hybrid electric vehicles (PHEVs) and modern consumer electronics to microand nanoelectromechanical systems, recent research and development has focused on new electrode materials for advanced energy storage devices. [ 1–5 ] Of the various power source devices, supercapacitors, also known as electrochemical capacitors (ECs), have attracted great interest due to a number of desirable properties, including fast charging and discharging, long cycle life, and the ability to deliver up to ten times more power than conventional batteries. [ 6–10 ] In addition, ECs play an important role in complementing fuel cells in future all-electric vehicles based on clean and renewable energy media. [ 11 ] There are three major types of electrode materials reported for ECs: carbonaceous materials, [ 12 ] metal oxides/hydroxides, [ 13 ] and conducting polymers. [ 14 ] Carbon-based materials store charge electrostatically from the reversible adsorption of ions onto their surfaces, leading to high power delivery at the cost of low energy density. By contrast, metal oxides/hydroxides and conducting polymers store charge in a faradic or redox-type process similar to batteries, which enables high energy density but is in general kinetically unfavorable. To bridge the performance gap between these materials, attempts at novel electrode design have been extensively made. Despite a huge number of publications, nearly all of them can be clarifi ed into one general concept, that is, the use of pseudocapacitive material–conductive matrix hybrid nanostructures. [ 15 , 16 ] In this regard, materials presenting high pseudocapacitence (metal oxides) are incorporated directly into highly conductive nanostructured carbons (carbon nanotubes, [ 17–20 ]

A review of the recent research on vibration energy harvesting via bistable systems

Abstract: The investigation of the conversion of vibrational energy into electrical power has become a major field of research. In recent years, bistable energy harvesting devices have attracted significant attention due to some of their unique features. Through a snap-through action, bistable systems transition from one stable state to the other, which could cause large amplitude motion and dramatically increase power generation. Due to their nonlinear characteristics, such devices may be effective across a broad-frequency bandwidth. Consequently, a rapid engagement of research has been undertaken to understand bistable electromechanical dynamics and to utilize the insight for the development of improved designs. This paper reviews, consolidates, and reports on the major efforts and findings documented in the literature. A common analytical framework for bistable electromechanical dynamics is presented, the principal results are provided, the wide variety of bistable energy harvesters are described, and some remaining challenges and proposed solutions are summarized.

Synthesis, Properties, and Applications of Hollow Micro-/Nanostructures

Abstract: In this Review, we aim to provide an updated summary of the research related to hollow micro- and nanostructures, covering both their synthesis and their applications. After a brief introduction to the definition and classification of the hollow micro-/nanostructures, we discuss various synthetic strategies that can be grouped into three major categories, including hard templating, soft templating, and self-templating synthesis. For both hard and soft templating strategies, we focus on how different types of templates are generated and then used for creating hollow structures. At the end of each section, the structural and morphological control over the product is discussed. For the self-templating strategy, we survey a number of unconventional synthetic methods, such as surface-protected etching, Ostwald ripening, the Kirkendall effect, and galvanic replacement. We then discuss the unique properties and niche applications of the hollow structures in diverse fields, including micro-/nanocontainers and rea...

Low-Cost High-Performance Solid-State Asymmetric Supercapacitors Based on MnO2 Nanowires and Fe2O3 Nanotubes

Abstract: A low-cost high-performance solid-state flexible asymmetric supercapacitor (ASC) with α-MnO2 nanowires and amorphous Fe2O3 nanotubes grown on flexible carbon fabric is first designed and fabricated. The assembled novel flexible ASC device with an extended operating voltage window of 1.6 V exhibits excellent performance such as a high energy density of 0.55 mWh/cm3 and good rate capability. The ASC devices can find numerous applications as effective power sources, such as powering color-switchable sun glasses and smart windows.