Jun-rak Choi

Bio: Jun-rak Choi is an academic researcher from Samsung Electro-Mechanics. The author has contributed to research in topics: Particle & Nanoparticle. The author has an hindex of 2, co-authored 2 publications receiving 548 citations.

Large-scale synthesis of copper nanoparticles by chemically controlled reduction for applications of inkjet-printed electronics.

Abstract: Copper nanoparticles are being given considerable attention as of late due to their interesting properties and potential applications in many areas of industry. One such exploitable use is as the major constituent of conductive inks and pastes used for printing various electronic components. In this study, copper nanoparticles were synthesized through a relatively large-scale (5 l), high-throughput (0.2 M) process. This facile method occurs through the chemical reduction of copper sulfate with sodium hypophosphite in ethylene glycol within the presence of a polymer surfactant (PVP), which was included to prevent aggregation and give dispersion stability to the resulting colloidal nanoparticles. Reaction yields were determined to be quantitative while particle dispersion yields were between 68 and 73%. The size of the copper nanoparticles could be controlled between 30 and 65 nm by varying the reaction time, reaction temperature, and relative ratio of copper sulfate to the surfactant. Field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) images of the particles revealed a spherical shape within the reported size regime, and x-ray analysis confirmed the formation of face-centered cubic (FCC) metallic copper. Furthermore, inkjet printing nanocopper inks prepared from the polymer-stabilized copper nanoparticles onto polyimide substrates resulted in metallic copper traces with low electrical resistivities (≥3.6 µΩ cm, or ≥2.2 times the resistivity of bulk copper) after a relatively low-temperature sintering process (200 °C for up to 60 min).

Environmentally friendly synthesis of organic-soluble silver nanoparticles for printed electronics

Abstract: In this study, we attempted to synthesize organic-soluble silver nanoparticles in the concentrated organic phase with an environmentally friendly method. The fully organic phase system contains silver acetate as a silver precursor, oleic acid as both a medium and a capping molecule, and tin acetate as a reducing agent. Monodisperse silver nanoparticles with average diameters of ca. 5 nm can be easily synthesized at large scale. Only a small usage of tin acetate ( 90%). Also, it was investigated that the residual tin atom does not exist in the synthesized silver nanoparticles. This implied that tin acetate acts as a reducing catalyst.

Conductive Nanomaterials for Printed Electronics

Abstract: This is a review on recent developments in the field of conductive nanomaterials and their application in printed electronics, with particular emphasis on inkjet printing of ink formulations based on metal nanoparticles, carbon nanotubes, and graphene sheets. The review describes the basic properties of conductive nanomaterials suitable for printed electronics (metal nanoparticles, carbon nanotubes, and graphene), their stabilization in dispersions, formulations of conductive inks, and obtaining conductive patterns by using various sintering methods. Applications of conductive nanomaterials for electronic devices (transparent electrodes, metallization of solar cells, RFID antennas, TFTs, and light emitting devices) are also briefly reviewed.

Green synthesis of highly stabilized nanocrystalline silver particles by a non-pathogenic and agriculturally important fungus T. asperellum.

Abstract: A controlled and up-scalable biosynthetic route to nanocrystalline silver particles with well-defined morphology using cell-free aqueous filtrate of a non-pathogenic and commercially viable biocontrol agent Trichoderma asperellum is being reported for the first time. A transparent solution of the cell-free filtrate of Trichoderma asperellum containing 1 mM AgNO3 turns progressively dark brown within 5 d of incubation at 25 °C. The kinetics of the reaction was studied using UV–vis spectroscopy. An intense surface plasmon resonance band at ~410 nm in the UV–vis spectrum clearly reveals the formation of silver nanoparticles. The size of the silver particles using TEM and XRD studies is found to be in the range 13–18 nm. These nanoparticles are found to be highly stable and even after prolonged storage for over 6 months they do not show significant aggregation. A plausible mechanism behind the formation of silver nanoparticles and their stabilization via capping has been investigated using FTIR and surface-enhanced resonance Raman spectroscopy.

Metal-based Inkjet Inks for Printed Electronics

Abstract: A review on applications of metal-based inkjet inks for printed electronics with a particular focus on inks con- taining metal nanoparticles, complexes and metallo-organic compounds. The review describes the preparation of such inks and obtaining conductive patterns by using various sintering methods: thermal, photonic, microwave, plasma, electri- cal, and chemically triggered. Various applications of metal-based inkjet inks (metallization of solar cell, RFID antennas, OLEDs, thin film transistors, electroluminescence devices) are reviewed.

Inorganic nanomaterials for printed electronics: a review

Abstract: Owing to their capability of bypassing conventional high-priced and inflexible silicon based electronics to manufacture a variety of devices on flexible substrates by using large-scale and high-volume printing techniques, printed electronics (PE) have attracted increasing attention in the field of manufacturing industry for electronic devices This simple and cost-effective approach could enhance current methods of constructing a patterned surface for nanomaterials and offer opportunities for developing fully-printed functional devices, especially offering the possibility of ubiquitous low-cost and flexible devices This review presents a summary of work to date on the inorganic nanomaterials involved in PE applications, focused on the utilization of inorganic nanomaterials-based inks in the successful preparation of printed conductive patterns, electrodes, sensors, thin film transistors (TFTs) and other micro-/nanoscale devices The printing techniques, sintering methods and printability of functional inks with their associated challenges are discussed, and we look forward so you can glimpse the future of PE applications