The 11th edition of Harrison's Principles of Internal Medicine welcomes Anthony Fauci to its editorial staff, in addition to more than 85 new contributors. While the organization of the book is similar to previous editions, major emphasis has been placed on disorders that affect multiple organ systems. Important advances in genetics, immunology, and oncology are emphasized. Many chapters of the book have been rewritten and describe major advances in internal medicine. Subjects that received only a paragraph or two of attention in previous editions are now covered in entire chapters. Among the chapters that have been extensively revised are the chapters on infections in the compromised host, on skin rashes in infections, on many of the viral infections, including cytomegalovirus and Epstein-Barr virus, on sexually transmitted diseases, on diabetes mellitus, on disorders of bone and mineral metabolism, and on lymphadenopathy and splenomegaly. The major revisions in these chapters and many

Harrison's Principles of Internal Medicine

Preface to the Second Edition. Preface to the First Edition. 1 Introduction. 2 Network Analysis. 2.1 Network Variables. 2.2 Scattering Parameters. 2.3 Short-Circuit Admittance Parameters. 2.4 Open-Circuit Impedance Parameters. 2.5 ABCD Parameters. 2.6 Transmission-Line Networks. 2.7 Network Connections. 2.8 Network Parameter Conversions. 2.9 Symmetrical Network Analysis. 2.10 Multiport Networks. 2.11 Equivalent and Dual Network. 2.12 Multimode Networks. 3 Basic Concepts and Theories of Filters. 3.1 Transfer Functions. 3.2 Lowpass Prototype Filters and Elements. 3.3 Frequency and Element Transformations. 3.4 Immittance Inverters. 3.5 Richards' Transformation and Kuroda Identities. 3.6 Dissipation and Unloaded Quality Factor. 4 Transmission Lines and Components. 4.1 Microstrip Lines. 4.2 Coupled Lines. 4.3 Discontinuities and Components. 4.4 Other Types of Microstrip Lines. 4.5 Coplanar Waveguide (CPW). 4.6 Slotlines. 5 Lowpass and Bandpass Filters. 5.1 Lowpass Filters. 5.2 Bandpass Filters. 6 Highpass and Bandstop Filters. 6.1 Highpass Filters. 6.2 Bandstop Filters. 7 Coupled-Resonator Circuits. 7.1 General Coupling Matrix for Coupled-Resonator Filters. 7.2 General Theory of Couplings. 7.3 General Formulation for Extracting Coupling Coefficient k. 7.4 Formulation for Extracting External Quality Factor Qe. 7.5 Numerical Examples. 7.6 General Coupling Matrix Including Source and Load. 8 CAD for Low-Cost and High-Volume Production. 8.1 Computer-Aided Design (CAD) Tools. 8.2 Computer-Aided Analysis (CAA). 8.3 Filter Synthesis by Optimization. 8.4 CAD Examples. 9 Advanced RF/Microwave Filters. 9.1 Selective Filters with a Single Pair of Transmission Zeros. 9.2 Cascaded Quadruplet (CQ) Filters. 9.3 Trisection and Cascaded Trisection (CT) Filters. 9.4 Advanced Filters with Transmission-Line Inserted Inverters. 9.5 Linear-Phase Filters. 9.6 Extracted Pole Filters. 9.7 Canonical Filters. 9.8 Multiband Filters. 10 Compact Filters and Filter Miniaturization. 10.1 Miniature Open-Loop and Hairpin Resonator Filters. 10.2 Slow-Wave Resonator Filters. 10.3 Miniature Dual-Mode Resonator Filters. 10.4 Lumped-Element Filters. 10.5 Miniature Filters Using High Dielectric-Constant Substrates. 10.6 Multilayer Filters. 11 Superconducting Filters. 11.1 High-Temperature Superconducting (HTS) Materials. 11.2 HTS Filters for Mobile Communications. 11.3 HTS Filters for Satellite Communications. 11.4 HTS Filters for Radio Astronomy and Radar. 11.5 High-Power HTS Filters. 11.6 Cryogenic Package. 12 Ultra-Wideband (UWB) Filters. 12.1 UWB Filters with Short-Circuited Stubs. 12.2 UWB-Coupled Resonator Filters. 12.3 Quasilumped Element UWB Filters. 12.4 UWB Filters Using Cascaded Miniature High- And Lowpass Filters. 12.5 UWB Filters with Notch Band(s). 13 Tunable and Reconfigurable Filters. 13.1 Tunable Combline Filters. 13.2 Tunable Open-Loop Filters without Via-Hole Grounding. 13.3 Reconfigurable Dual-Mode Bandpass Filters. 13.4 Wideband Filters with Reconfigurable Bandwidth. 13.5 Reconfigurable UWB Filters. 13.6 RF MEMS Reconfigurable Filters. 13.7 Piezoelectric Transducer Tunable Filters. 13.8 Ferroelectric Tunable Filters. Appendix: Useful Constants and Data. A.1 Physical Constants. A.2 Conductivity of Metals at 25 C (298K). A.3 Electical Resistivity rho in 10-8 m of Metals. A.4 Properties of Dielectric Substrates. Index.

Microstrip filters for RF/microwave applications

In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the same frequency band. This tutorial paper reviews the main concepts of IBFD wireless. One of the biggest practical impediments to IBFD operation is the presence of self-interference, i.e., the interference that the modem's transmitter causes to its own receiver. This tutorial surveys a wide range of IBFD self-interference mitigation techniques. Also discussed are numerous other research challenges and opportunities in the design and analysis of IBFD wireless systems.

/pdf/in-band-full-duplex-wireless-challenges-and-opportunities-djlyhtrciu.pdf

In-Band Full-Duplex Wireless: Challenges and Opportunities

In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the same frequency band. This tutorial paper reviews the main concepts of IBFD wireless. Because one the biggest practical impediments to IBFD operation is the presence of self-interference, i.e., the interference caused by an IBFD node's own transmissions to its desired receptions, this tutorial surveys a wide range of IBFD self-interference mitigation techniques. Also discussed are numerous other research challenges and opportunities in the design and analysis of IBFD wireless systems.

A new defected ground structure (DGS) for the microstrip line is proposed in this paper. The proposed DGS unit structure can provide the bandgap characteristic in some frequency bands with only one or more unit lattices. The equivalent circuit for the proposed defected ground unit structure is derived by means of three-dimensional field analysis methods. The equivalent-circuit parameters are extracted by using a simple circuit analysis method. By employing the extracted parameters and circuit analysis theory, the bandgap effect for the provided defected ground unit structure can be explained. By using the derived and extracted equivalent circuit and parameters, the low-pass filters are designed and implemented. The experimental results show excellent agreement with theoretical results and the validity of the modeling method for the proposed defected ground unit structure.

A design of the low-pass filter using the novel microstrip defected ground structure

A new one-dimensional (1-D) defected ground unit lattice is proposed in order to improve the effective inductance. Increasing the effective inductance makes it easy to control the cutoff frequency characteristics. The proposed periodic defected ground structure (DGS) provides the excellent cutoff and stopband characteristics. In order to show the improved the effective inductance, three DGS circuits were fabricated with identical periodic and different dimensions. Measurements on the fabricated DGS circuits show that the cutoff and stopband center frequency characteristics depend on the physical dimension of the proposed DGS unit lattice,.

A novel 1-D periodic defected ground structure for planar circuits

In this paper, a novel three-pole coupled-line bandpass filter with a microstrip configuration is presented. Presented bandpass filters use defected ground structure (DGS) sections to simultaneously realize a resonator and an inverter. The proposed coupled-line bandpass filter provides compact size with low insertion-loss characteristic. Furthermore, a DGS shape for a microstrip line is newly proposed. The proposed DGS unit structure has a resonance characteristic in some frequency band. The proposed coupled-line filter can provide attenuation poles for wide stopband characteristic due to resonance characteristic of DGS. The equivalent circuit for the proposed DGS unit section is described. The equivalent-circuit parameters for DGS are extracted by using a three-dimensional finite-element-method calculation and simple circuit analysis method. A design method for the proposed coupled-line filter is derived based on coupled-line filter theory and the equivalent circuit of the DGS. The experimental results show excellent agreements with theoretical simulation results.

A design of the novel coupled-line bandpass filter using defected ground structure with wide stopband performance

This letter presents a new technique to reduce the size of microwave amplifiers using a defected ground structure (DGS). The DGS on the ground plane of a microstrip line provides an additional effective inductive component, which enables a microstrip line with very high impedance to be realized and shows slow-wave characteristics. The resultant electrical length of the microstrip line with DGS is longer than that of a conventional line for the same physical length. Therefore, the microstrip line with DGS can be shortened in order to maintain the same electrical length, matching, and performances of the basic (original) amplifier. To confirm the validity of this idea, two amplifiers, one of which is designed using a conventional microstrip line and the other is reduced using DGS, are fabricated, measured, and compared. The performance of the reduced amplifier with DGS is quite similar to that of the basic amplifier, even though the series microstrip lines with DGS are much smaller than those of the basic amplifier by 53.8% and 55.6% at input and output matching networks, respectively.

/pdf/application-of-defected-ground-structure-in-reducing-the-5582hcb2uy.pdf

Application of defected ground structure in reducing the size of amplifiers

A new photonic bandgap unit structure for microstrip line is proposed. The equivalent circuit for the proposed photonic bandgap unit structure is derived by means of three dimensional field analysis methods. The equivalent circuit parameters are extracted by using the circuit analysis method. By employing the extracted parameters, the wide-band harmonic rejection low-pass filter is designed. The experimental results show the excellent agreements with theoretical results.

Jun-Seok Park

Papers

A design of the low-pass filter using the novel microstrip defected ground structure

A novel 1-D periodic defected ground structure for planar circuits

A design of the novel coupled-line bandpass filter using defected ground structure with wide stopband performance

Application of defected ground structure in reducing the size of amplifiers

Modeling of a photonic bandgap and its application for the low-pass filter design