Jung Ho Ahn

Bio: Jung Ho Ahn is an academic researcher from Seoul National University. The author has contributed to research in topics: Dram & Cache. The author has an hindex of 35, co-authored 118 publications receiving 7505 citations. Previous affiliations of Jung Ho Ahn include Hewlett-Packard & Stanford University.

McPAT: an integrated power, area, and timing modeling framework for multicore and manycore architectures

Abstract: This paper introduces McPAT, an integrated power, area, and timing modeling framework that supports comprehensive design space exploration for multicore and manycore processor configurations ranging from 90nm to 22nm and beyond. At the microarchitectural level, McPAT includes models for the fundamental components of a chip multiprocessor, including in-order and out-of-order processor cores, networks-on-chip, shared caches, integrated memory controllers, and multiple-domain clocking. At the circuit and technology levels, McPAT supports critical-path timing modeling, area modeling, and dynamic, short-circuit, and leakage power modeling for each of the device types forecast in the ITRS roadmap including bulk CMOS, SOI, and double-gate transistors. McPAT has a flexible XML interface to facilitate its use with many performance simulators. Combined with a performance simulator, McPAT enables architects to consistently quantify the cost of new ideas and assess tradeoffs of different architectures using new metrics like energy-delay-area2 product (EDA2P) and energy-delay-area product (EDAP). This paper explores the interconnect options of future manycore processors by varying the degree of clustering over generations of process technologies. Clustering will bring interesting tradeoffs between area and performance because the interconnects needed to group cores into clusters incur area overhead, but many applications can make good use of them due to synergies of cache sharing. Combining power, area, and timing results of McPAT with performance simulation of PARSEC benchmarks at the 22nm technology node for both common in-order and out-of-order manycore designs shows that when die cost is not taken into account clustering 8 cores together gives the best energy-delay product, whereas when cost is taken into account configuring clusters with 4 cores gives the best EDA2P and EDAP.

Corona: System Implications of Emerging Nanophotonic Technology

Abstract: We expect that many-core microprocessors will push performance per chip from the 10 gigaflop to the 10 teraflop range in the coming decade. To support this increased performance, memory and inter-core bandwidths will also have to scale by orders of magnitude. Pin limitations, the energy cost of electrical signaling, and the non-scalability of chip-length global wires are significant bandwidth impediments. Recent developments in silicon nanophotonic technology have the potential to meet these off- and on-stack bandwidth requirements at acceptable power levels. Corona is a 3D many-core architecture that uses nanophotonic communication for both inter-core communication and off-stack communication to memory or I/O devices. Its peak floating-point performance is 10 teraflops. Dense wavelength division multiplexed optically connected memory modules provide 10 terabyte per second memory bandwidth. A photonic crossbar fully interconnects its 256 low-power multithreaded cores at 20 terabyte per second bandwidth. We have simulated a 1024 thread Corona system running synthetic benchmarks and scaled versions of the SPLASH-2 benchmark suite. We believe that in comparison with an electrically-connected many-core alternative that uses the same on-stack interconnect power, Corona can provide 2 to 6 times more performance on many memory intensive workloads, while simultaneously reducing power.

Merrimac: Supercomputing with Streams

Abstract: Merrimac uses stream architecture and advanced interconnection networks to give an order of magnitude more performance per unit cost than cluster-based scientific computers built from the same technology. Organizing the computation into streams and exploiting the resulting locality using a register hierarchy enables a stream architecture to reduce the memory bandwidth required by representative applications by an order of magnitude or more. Hence a processing node with a fixed bandwidth (expensive) can support an order of magnitude more arithmetic units (inexpensive). This in turn allows a given level of performance to be achieved with fewer nodes (a 1-PFLOPS machine, for example, with just 8,192 nodes) resulting in greater reliability, and simpler system management. We sketch the design of Merrimac, a streaming scientific computer that can be scaled from a $20K 2 TFLOPS workstation to a $20M 2 PFLOPS supercomputer and present the results of some initial application experiments on this architecture.

Programmable stream processors

Abstract: The demand for flexibility in media processing motivates the use of programmable processors. Stream processing bridges the gap between inflexible special-purpose solutions and current programmable architectures that cannot meet the computational demands of media-processing applications. The central idea behind stream processing is to organize an application into streams and kernels to expose the inherent locality and concurrency in media-processing applications. The performance of the Imagine stream processor on these media application is given.

HyperX: topology, routing, and packaging of efficient large-scale networks

Abstract: In the push to achieve exascale performance, systems will grow to over 100,000 sockets, as growing cores-per-socket and improved single-core performance provide only part of the speedup needed. These systems will need affordable interconnect structures that scale to this level. To meet the need, we consider an extension of the hypercube and flattened butterfly topologies, the HyperX, and give an adaptive routing algorithm, DAL. HyperX takes advantage of high-radix switch components that integrated photonics will make available. Our main contributions include a formal descriptive framework, enabling a search method that finds optimal HyperX configurations; DAL; and a low cost packaging strategy for an exascale HyperX. Simulations show that HyperX can provide performance as good as a folded Clos, with fewer switches. We also describe a HyperX packaging scheme that reduces system cost. Our analysis of efficiency, performance, and packaging demonstrates that the HyperX is a strong competitor for exascale networks.

The gem5 simulator

Abstract: The gem5 simulation infrastructure is the merger of the best aspects of the M5 [4] and GEMS [9] simulators. M5 provides a highly configurable simulation framework, multiple ISAs, and diverse CPU models. GEMS complements these features with a detailed and exible memory system, including support for multiple cache coherence protocols and interconnect models. Currently, gem5 supports most commercial ISAs (ARM, ALPHA, MIPS, Power, SPARC, and x86), including booting Linux on three of them (ARM, ALPHA, and x86).The project is the result of the combined efforts of many academic and industrial institutions, including AMD, ARM, HP, MIPS, Princeton, MIT, and the Universities of Michigan, Texas, and Wisconsin. Over the past ten years, M5 and GEMS have been used in hundreds of publications and have been downloaded tens of thousands of times. The high level of collaboration on the gem5 project, combined with the previous success of the component parts and a liberal BSD-like license, make gem5 a valuable full-system simulation tool.

McPAT: an integrated power, area, and timing modeling framework for multicore and manycore architectures

Abstract: This paper introduces McPAT, an integrated power, area, and timing modeling framework that supports comprehensive design space exploration for multicore and manycore processor configurations ranging from 90nm to 22nm and beyond. At the microarchitectural level, McPAT includes models for the fundamental components of a chip multiprocessor, including in-order and out-of-order processor cores, networks-on-chip, shared caches, integrated memory controllers, and multiple-domain clocking. At the circuit and technology levels, McPAT supports critical-path timing modeling, area modeling, and dynamic, short-circuit, and leakage power modeling for each of the device types forecast in the ITRS roadmap including bulk CMOS, SOI, and double-gate transistors. McPAT has a flexible XML interface to facilitate its use with many performance simulators. Combined with a performance simulator, McPAT enables architects to consistently quantify the cost of new ideas and assess tradeoffs of different architectures using new metrics like energy-delay-area2 product (EDA2P) and energy-delay-area product (EDAP). This paper explores the interconnect options of future manycore processors by varying the degree of clustering over generations of process technologies. Clustering will bring interesting tradeoffs between area and performance because the interconnects needed to group cores into clusters incur area overhead, but many applications can make good use of them due to synergies of cache sharing. Combining power, area, and timing results of McPAT with performance simulation of PARSEC benchmarks at the 22nm technology node for both common in-order and out-of-order manycore designs shows that when die cost is not taken into account clustering 8 cores together gives the best energy-delay product, whereas when cost is taken into account configuring clusters with 4 cores gives the best EDA2P and EDAP.

DianNao: a small-footprint high-throughput accelerator for ubiquitous machine-learning

Abstract: Machine-Learning tasks are becoming pervasive in a broad range of domains, and in a broad range of systems (from embedded systems to data centers). At the same time, a small set of machine-learning algorithms (especially Convolutional and Deep Neural Networks, i.e., CNNs and DNNs) are proving to be state-of-the-art across many applications. As architectures evolve towards heterogeneous multi-cores composed of a mix of cores and accelerators, a machine-learning accelerator can achieve the rare combination of efficiency (due to the small number of target algorithms) and broad application scope. Until now, most machine-learning accelerator designs have focused on efficiently implementing the computational part of the algorithms. However, recent state-of-the-art CNNs and DNNs are characterized by their large size. In this study, we design an accelerator for large-scale CNNs and DNNs, with a special emphasis on the impact of memory on accelerator design, performance and energy. We show that it is possible to design an accelerator with a high throughput, capable of performing 452 GOP/s (key NN operations such as synaptic weight multiplications and neurons outputs additions) in a small footprint of 3.02 mm2 and 485 mW; compared to a 128-bit 2GHz SIMD processor, the accelerator is 117.87x faster, and it can reduce the total energy by 21.08x. The accelerator characteristics are obtained after layout at 65 nm. Such a high throughput in a small footprint can open up the usage of state-of-the-art machine-learning algorithms in a broad set of systems and for a broad set of applications.

Analyzing CUDA workloads using a detailed GPU simulator

Abstract: Modern Graphic Processing Units (GPUs) provide sufficiently flexible programming models that understanding their performance can provide insight in designing tomorrow's manycore processors, whether those are GPUs or otherwise. The combination of multiple, multithreaded, SIMD cores makes studying these GPUs useful in understanding tradeoffs among memory, data, and thread level parallelism. While modern GPUs offer orders of magnitude more raw computing power than contemporary CPUs, many important applications, even those with abundant data level parallelism, do not achieve peak performance. This paper characterizes several non-graphics applications written in NVIDIA's CUDA programming model by running them on a novel detailed microarchitecture performance simulator that runs NVIDIA's parallel thread execution (PTX) virtual instruction set. For this study, we selected twelve non-trivial CUDA applications demonstrating varying levels of performance improvement on GPU hardware (versus a CPU-only sequential version of the application). We study the performance of these applications on our GPU performance simulator with configurations comparable to contemporary high-end graphics cards. We characterize the performance impact of several microarchitecture design choices including choice of interconnect topology, use of caches, design of memory controller, parallel workload distribution mechanisms, and memory request coalescing hardware. Two observations we make are (1) that for the applications we study, performance is more sensitive to interconnect bisection bandwidth rather than latency, and (2) that, for some applications, running fewer threads concurrently than on-chip resources might otherwise allow can improve performance by reducing contention in the memory system.