Jung Ho Je

Bio: Jung Ho Je is an academic researcher from Pohang University of Science and Technology. The author has contributed to research in topics: Thin film & Nucleation. The author has an hindex of 40, co-authored 328 publications receiving 6264 citations. Previous affiliations of Jung Ho Je include Academia Sinica & Adama University.

Effects of strain energy on the preferred orientation of TiN thin films

Abstract: The effects of strain energy on the preferred orientation of TiN thin films were investigated. In the TiN film deposited by plasma‐enhanced chemical‐vapor deposition with a power of 50 W, the overall energy of the film mainly depended on the surface energy because its strain energy was relatively small. The preferred orientation of the film corresponded to the plane with the lowest surface energy, i.e., (200). However, in the TiN film deposited by rf sputtering with a power of 200 W, the overall energy of the film was largely controlled by strain energy due to its large strain energy, and its growth orientation corresponded to the plane with the lowest strain energy, i.e., (111). Furthermore, the preferred orientation of the TiN film was changed from (200) to (111) with the film thickness. It is considered that this phenomenon is due to the increase of strain energy with its thickness.

Patterning droplets with durotaxis

Abstract: Numerous cell types have shown a remarkable ability to detect and move along gradients in stiffness of an underlying substrate—a process known as durotaxis The mechanisms underlying durotaxis are still unresolved, but generally believed to involve active sensing and locomotion Here, we show that simple liquid droplets also undergo durotaxis By modulating substrate stiffness, we obtain fine control of droplet position on soft, flat substrates Unlike other control mechanisms, droplet durotaxis works without imposing chemical, thermal, electrical, or topographical gradients We show that droplet durotaxis can be used to create large-scale droplet patterns and is potentially useful for many applications, such as microfluidics, thermal control, and microfabrication

Hard x-ray microscopy with Fresnel zone plates reaches 40 nm Rayleigh resolution.

Abstract: Substantial improvements in the nanofabrication and characteristics of gold Fresnel zone plates yielded unprecedented resolution levels in hard-x-ray microscopy. Tests performed on a variety of specimens with 8–10keV photons demonstrated a first-order lateral resolution below 40nm based on the Rayleigh criterion. Combined with the use of a phase contrast technique, this makes it possible to view features in the 30nm range; good-quality images can be obtained at video rate, down to 50ms∕frame. The important repercussions on materials science, nanotechnology, and the life sciences are discussed.

Stretchable electronics: materials, architectures and integrations

Abstract: Stretchable electronics, ie elastic electronics that can be bent and stretched, is a new, emerging class of electronics, based on building electronic circuits or devices on stretchable substrates The potential applications range from fully conformable, stretchable, skin sensors for robotic devices, wearable electronic devices, to flesh-like biodevices One of the challenges in the development of stretchable electronics is to retain full functionality under high external strains in stretching In this paper, we review a few approaches recently developed for stretchable electronics and highlight recent research efforts on multi-directional writing for stretchable, three-dimensional structures (Some figures may appear in colour only in the online journal)

Capillary force repels coffee-ring effect.

Abstract: When a coffee drop dries on a solid surface, it leaves a ringlike deposit along the edge and this is known as the "coffee-ring effect." We find a different motion of particles repelling the coffee-ring effect in drying droplets; the motion of particles that is initially toward the edge by the coffee-ring effect is reversed toward the center by a capillary force. The reversal takes place when the capillary force prevails over the outward coffee-ring flow. We discuss the geometric constraints for the capillary force and the reverse motion. Our findings of reversal phenomena would be important in many scenarios of drying colloidal fluids.

A comprehensive review of zno materials and devices

Abstract: The semiconductor ZnO has gained substantial interest in the research community in part because of its large exciton binding energy (60meV) which could lead to lasing action based on exciton recombination even above room temperature. Even though research focusing on ZnO goes back many decades, the renewed interest is fueled by availability of high-quality substrates and reports of p-type conduction and ferromagnetic behavior when doped with transitions metals, both of which remain controversial. It is this renewed interest in ZnO which forms the basis of this review. As mentioned already, ZnO is not new to the semiconductor field, with studies of its lattice parameter dating back to 1935 by Bunn [Proc. Phys. Soc. London 47, 836 (1935)], studies of its vibrational properties with Raman scattering in 1966 by Damen et al. [Phys. Rev. 142, 570 (1966)], detailed optical studies in 1954 by Mollwo [Z. Angew. Phys. 6, 257 (1954)], and its growth by chemical-vapor transport in 1970 by Galli and Coker [Appl. Phys. ...

Recent advances in the liquid-phase syntheses of inorganic nanoparticles.

Abstract: The development of novel materials is a fundamental focal point of chemical research; and this interest is mandated by advancements in all areas of industry and technology. A good example of the synergism between scientific discovery and technological development is the electronics industry, where discoveries of new semiconducting materials resulted in the evolution from vacuum tubes to diodes and transistors, and eventually to miniature chips. The progression of this technology led to the development * To whom correspondence should be addressed. B.L.C.: (504) 2801385 (phone); (504) 280-3185 (fax); bcushing@uno.edu (e-mail). C.J.O.: (504)280-6846(phone);(504)280-3185(fax);coconnor@uno.edu (e-mail). 3893 Chem. Rev. 2004, 104, 3893−3946

Suppression of the coffee-ring effect by shape-dependent capillary interactions

Abstract: When a drop of liquid dries on a solid surface, its suspended particulate matter is deposited in ring-like fashion. This phenomenon, known as the coffee-ring effect, is familiar to anyone who has observed a drop of coffee dry. During the drying process, drop edges become pinned to the substrate, and capillary flow outward from the centre of the drop brings suspended particles to the edge as evaporation proceeds. After evaporation, suspended particles are left highly concentrated along the original drop edge. The coffee-ring effect is manifested in systems with diverse constituents, ranging from large colloids to nanoparticles and individual molecules. In fact--despite the many practical applications for uniform coatings in printing, biology and complex assembly-the ubiquitous nature of the effect has made it difficult to avoid. Here we show experimentally that the shape of the suspended particles is important and can be used to eliminate the coffee-ring effect: ellipsoidal particles are deposited uniformly during evaporation. The anisotropic shape of the particles significantly deforms interfaces, producing strong interparticle capillary interactions. Thus, after the ellipsoids are carried to the air-water interface by the same outward flow that causes the coffee-ring effect for spheres, strong long-ranged interparticle attractions between ellipsoids lead to the formation of loosely packed or arrested structures on the air-water interface. These structures prevent the suspended particles from reaching the drop edge and ensure uniform deposition. Interestingly, under appropriate conditions, suspensions of spheres mixed with a small number of ellipsoids also produce uniform deposition. Thus, particle shape provides a convenient parameter to control the deposition of particles, without modification of particle or solvent chemistry.