Alginate: properties and biomedical applications

Chitosan-based hydrogels for controlled, localized drug delivery

Utilization of polymers as biomaterials has greatly impacted the advancement of modern medicine. Specifically, polymeric biomaterials that are biodegradable provide the significant advantage of being able to be broken down and removed after they have served their function. Applications are wide ranging with degradable polymers being used clinically as surgical sutures and implants. In order to fit functional demand, materials with desired physical, chemical, biological, biomechanical and degradation properties must be selected. Fortunately, a wide range of natural and synthetic degradable polymers has been investigated for biomedical applications with novel materials constantly being developed to meet new challenges. This review summarizes the most recent advances in the field over the past 4 years, specifically highlighting new and interesting discoveries in tissue engineering and drug delivery applications.

/pdf/biomedical-applications-of-biodegradable-polymers-2db9gcyzxw.pdf

Biomedical Applications of Biodegradable Polymers

Hydrogel Nanoparticles in Drug Delivery

Oil spills and industrial organic pollutants have induced severe water pollution and threatened every species in the ecological system. To deal with oily water, special wettability stimulated materials have been developed over the past decade to separate oil-and-water mixtures. Basically, synergy between the surface chemical composition and surface topography are commonly known as the key factors to realize the opposite wettability to oils and water and dominate the selective wetting or absorption of oils/water. In this review, we mainly focus on the development of materials with either super-lyophobicity or super-lyophilicity properties in oil/water separation applications where they can be classified into four kinds as follows (in terms of the surface wettability of water and oils): (i) superhydrophobic and superoleophilic materials, (ii) superhydrophilic and under water superoleophobic materials, (iii) superhydrophilic and superoleophobic materials, and (iv) smart oil/water separation materials with switchable wettability. These materials have already been applied to the separation of oil-and-water mixtures: from simple oil/water layered mixtures to oil/water emulsions (including oil-in-water emulsions and water-in-oil emulsions), and from non-intelligent materials to intelligent materials. Moreover, they also exhibit high absorption capacity or separation efficiency and selectivity, simple and fast separation/absorption ability, excellent recyclability, economical efficiency and outstanding durability under harsh conditions. Then, related theories are proposed to understand the physical mechanisms that occur during the oil/water separation process. Finally, some challenges and promising breakthroughs in this field are also discussed. It is expected that special wettability stimulated oil/water separation materials can achieve industrial scale production and be put into use for oil spills and industrial oily wastewater treatment in the near future.

Biomimetic super-lyophobic and super-lyophilic materials applied for oil/water separation: a new strategy beyond nature

Superhydrophobic and superoleophilic polyester materials are successfully prepared by one-step growth of silicone nanofilaments onto the textile via chemical vapor deposition of trichloromethylsilane. The successful growth of silicone nanofilaments is confirmed with scanning electron microscopy, energy-dispersive X-ray analysis, and investigation of the wetting behavior of water on the textile. Even microfibers deeply imbedded inside a woven material could be coated very well with the nanofilaments. The coated textile is water repellant and could only be wetted by liquids of low surface tension. The applications of the coated textile as a membrane for oil/water separation and as a bag for selective oil absorption from water are studied in detail. Owing to the superwetting properties and flexibility of the coated textile, excellent reusability, oil/water separation efficiency, and selective oil absorption capacity are observed, which make it very promising material, e.g., for practical oil absorption.

Polyester Materials with Superwetting Silicone Nanofilaments for Oil/Water Separation and Selective Oil Absorption

Magnetic, durable, and superhydrophobic polyurethane (PU) sponges were fabricated by chemical vapor deposition (CVD) of tetraethoxysilane (TEOS) to bind the Fe3O4 nanoparticles tightly on the sponge and then dip-coating in a fluoropolymer (FP) aqueous solution. The sponges were characterized using scanning electron microscopy and other analytical techniques. The effects of CVD time of TEOS and FP concentration on wettability, mechanical properties, oil absorbency, and oil/water selectivity of the sponges were also investigated. The sponges exhibit fast magnetic responsivity and excellent superhydrophobicity/superoleophilicity (CAwater = 157° and CAoil ≈ 0°). The sponges also show very high efficiency in oil/water separation and could, driven by a magnet, quickly absorb floating oils on the water surface and heavy oils under water. Moreover, the PU@Fe3O4@SiO2@FP sponges could be used as membranes for oil/water separation and for continuous separation of large amounts of oil pollutants from the water surfac...

Magnetic, Durable, and Superhydrophobic Polyurethane@Fe3O4@SiO2@Fluoropolymer Sponges for Selective Oil Absorption and Oil/Water Separation

Superoleophobic surfaces were fabricated by using organosilanes. The surfaces feature high contact angles and ultralow sliding angles for various nonpolar liquids, excellent transparency, and chemical and environmental stability. The microstructure and superoleophobicity of the surfaces can be regulated simply by the water concentration in toluene used during the coating procedure. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Superoleophobic coatings with ultralow sliding angles based on silicone nanofilaments.

http://www.emec.licp.cas.cn/kycg/2007/201207/W020110605408583871081.pdf

Junping Zhang

Papers

Polyester Materials with Superwetting Silicone Nanofilaments for Oil/Water Separation and Selective Oil Absorption

Magnetic, Durable, and Superhydrophobic Polyurethane@Fe3O4@SiO2@Fluoropolymer Sponges for Selective Oil Absorption and Oil/Water Separation

Superoleophobic coatings with ultralow sliding angles based on silicone nanofilaments.

Synthesis and characterization of chitosan-g-poly(acrylic acid)/attapulgite superabsorbent composites

Removal of methylene blue from aqueous solution using chitosan-g-poly(acrylic acid)/montmorillonite superadsorbent nanocomposite