Junqiang Wang

Bio: Junqiang Wang is an academic researcher from University of Electronic Science and Technology of China. The author has contributed to research in topics: Mesoporous material & Nanorod. The author has an hindex of 10, co-authored 12 publications receiving 539 citations.

Room-Temperature High-Performance H2S Sensor Based on Porous CuO Nanosheets Prepared by Hydrothermal Method

Abstract: Porous CuO nanosheets were prepared on alumina tubes using a facile hydrothermal method, and their morphology, microstructure, and gas-sensing properties were investigated. The monoclinic CuO nanosheets had an average thickness of 62.5 nm and were embedded with numerous holes with diameters ranging from 5 to 17 nm. The porous CuO nanosheets were used to fabricate gas sensors to detect hydrogen sulfide (H2S) operating at room temperature. The sensor showed a good response sensitivity of 1.25 with respond/recovery times of 234 and 76 s, respectively, when tested with the H2S concentrations as low as 10 ppb. It also showed a remarkably high selectivity to the H2S, but only minor responses to other gases such as SO2, NO, NO2, H2, CO, and C2H5OH. The working principle of the porous CuO nanosheet based sensor to detect the H2S was identified to be the phase transition from semiconducting CuO to a metallic conducting CuS.

Enhanced NH 3 gas-sensing performance of silica modified CeO 2 nanostructure based sensors

Abstract: The silica modified CeO2 gas sensing nanomaterials are synthesized using a sol-hydrothermal route. The 8%silica-CeO2 has larger specific surface areas of 83.75 m2/g and smaller crystalline size of 11.5 nm than pure CeO2, respectively. Compared to pure CeO2, the 8%silica-CeO2 based gas sensor exhibits significant enhancement NH3 gas-sensing performance. At room temperature, it shows much better gas response of 3244% to 80 ppm of NH3 gas and lower detection limit (0.5 ppm) towards NH3 gas. It is also found that the gas response of the NH3 gas sensors increases linearly with the increase of NH3 gas concentration. Moreover, the NH3 gas sensor have good reversibility, stability and selectivity. The reason of enhanced NH3 gas-sensing performance is not only because of the increased specific surface areas, but also due to the electrolytic conductivity of NH4+ and OH− on the surface.

High precision NH3 sensing using network nano-sheet Co3O4 arrays based sensor at room temperature

Abstract: Network nano-sheet arrays of Co3O4 for high precision NH3 sensing application were prepared on alumina tube using a facile hydrothermal process without template or surfactant, and their morphology, nanostructures and NH3 gas sensing performance were investigated. The prepared nano-sheet Co3O4 arrays showed a network structure with an average sheet thickness of 39.5 nm. Detailed structural analysis confirmed that the synthesized Co3O4 nano-sheets were consisted of nanoparticles with an average diameter of 20.0 nm. NH3 gas sensor based on these network Co3O4 nano-sheet arrays showed a low detection limit (0.2 ppm), rapid response/recovery time (9 s/134 s for 0.2 ppm NH3), good reproducibility and long-term stability for NH3 detection at room temperature.

Two-Dimensional Nanostructured Materials for Gas Sensing

Abstract: Two-dimensional (2D) nanostructures are highly attractive for fabricating nanodevices due to their high surface-to-volume ratio and good compatibility with device design. In recent years 2D nanostructures of various materials including metal oxides, graphene, metal dichalcogenides, phosphorene, BN and MXenes, have demonstrated significant potential for gas sensors. This review aims to provide the most recent advancements in utilization of various 2D nanomaterials for gas sensing. The common methods for the preparation of 2D nanostructures are briefly summarized first. The focus is then placed on the sensing performances provided by devices integrating 2D nanostructures. Strategies for optimizing the sensing features are also discussed. By combining both the experimental results and the theoretical studies available, structure-properties correlations are discussed. The conclusion gives some perspectives on the open challenges and future prospects for engineering advanced 2D nanostructures for high-performance gas sensors devices.

A review on chemiresistive room temperature gas sensors based on metal oxide nanostructures, graphene and 2D transition metal dichalcogenides

Abstract: Room-temperature (RT) gas sensing is desirable for battery-powered or self-powered instrumentation that can monitor emissions associated with pollution and industrial processes. This review (with 171 references) discusses recent advances in three types of porous nanostructures that have shown remarkable potential for RT gas sensing. The first group comprises hierarchical oxide nanostructures (mainly oxides of Sn, Ni, Zn, W, In, La, Fe, Co). The second group comprises graphene and its derivatives (graphene, graphene oxides, reduced graphene oxides, and their composites with metal oxides and noble metals). The third group comprises 2D transition metal dichalcogenides (mainly sulfides of Mo, W, Sn, Ni, also in combination with metal oxides). They all have been found to enable RT sensing of gases such as NOx, NH3, H2, SO2, CO, and of vapors such as of acetone, formaldehyde or methanol. Attractive features also include high selectivity and sensitivity, long-term stability and affordable costs. Strengths and limitations of these materials are highlighted, and prospects with respect to the development of new materials to overcome existing limitations are discussed.

Electrically-Transduced Chemical Sensors Based on Two-Dimensional Nanomaterials

Abstract: Electrically–transduced sensors, with their simplicity and compatibility with standard electronic technologies, produce signals that can be efficiently acquired, processed, stored, and analyzed. Two dimensional (2D) nanomaterials, including graphene, phosphorene (BP), transition metal dichalcogenides (TMDCs), and others, have proven to be attractive for the fabrication of high–performance electrically-transduced chemical sensors due to their remarkable electronic and physical properties originating from their 2D structure. This review highlights the advances in electrically-transduced chemical sensing that rely on 2D materials. The structural components of such sensors are described, and the underlying operating principles for different types of architectures are discussed. The structural features, electronic properties, and surface chemistry of 2D nanostructures that dictate their sensing performance are reviewed. Key advances in the application of 2D materials, from both a historical and analytical pers...

Advances in designs and mechanisms of semiconducting metal oxide nanostructures for high-precision gas sensors operated at room temperature

Abstract: High-precision gas sensors operated at room temperature are attractive for various real-time gas monitoring applications, with advantages including low energy consumption, cost effectiveness and device miniaturization/flexibility. Studies on sensing materials, which play a key role in good gas sensing performance, are currently focused extensively on semiconducting metal oxide nanostructures (SMONs) used in the conventional resistance type gas sensors. This topical review highlights the designs and mechanisms of different SMONs with various patterns (e.g. nanoparticles, nanowires, nanosheets, nanorods, nanotubes, nanofilms, etc.) for gas sensors to detect various hazardous gases at room temperature. The key topics include (1) single phase SMONs including both n-type and p-type ones; (2) noble metal nanoparticle and metal ion modified SMONs; (3) composite oxides of SMONs; (4) composites of SMONs with carbon nanomaterials. Enhancement of the sensing performance of SMONs at room temperature can also be realized using a photo-activation effect such as ultraviolet light. SMON based mechanically flexible and wearable room temperature gas sensors are also discussed. Various mechanisms have been discussed for the enhanced sensing performance, which include redox reactions, heterojunction generation, formation of metal sulfides and the spillover effect. Finally, major challenges and prospects for the SMON based room temperature gas sensors are highlighted.

Functional gas sensing nanomaterials: A panoramic view

Abstract: The alarming rise of indoor pollution and the need to combat the associated negative effects have promoted increasing attention in modernizing the chemical sensing technologies by newly designed materials with rich and tunable functionalities at atomic or molecular levels. With the appealing physical, chemical, optical, and electronic properties for various potential applications, the state-of-art gas-sensing nanomaterials and their future perspectives are well-documented and summarized in this paper. Specifically, the key performance attributes are addressed in detail such as the sensitivity, selectivity, reversibility, operating temperature, response time, and detection limit. As such, this review provides both critical insights in exploring and understanding various gas sensing nanomaterials and points out limitations and opportunities for further developments, such as morphology control, doping and surface alteration, atomic-scale characterization, and applications in different fields. Finally, the challenges and outlooks are discussed on the basis of the current developments.