Jürgen Stampfl

Bio: Jürgen Stampfl is an academic researcher from Vienna University of Technology. The author has contributed to research in topics: Ceramic & Photopolymer. The author has an hindex of 43, co-authored 160 publications receiving 5981 citations. Previous affiliations of Jürgen Stampfl include Graz University of Technology & University of Vienna.

Polymers for 3D Printing and Customized Additive Manufacturing

Abstract: Additive manufacturing (AM) alias 3D printing translates computer-aided design (CAD) virtual 3D models into physical objects. By digital slicing of CAD, 3D scan, or tomography data, AM builds objects layer by layer without the need for molds or machining. AM enables decentralized fabrication of customized objects on demand by exploiting digital information storage and retrieval via the Internet. The ongoing transition from rapid prototyping to rapid manufacturing prompts new challenges for mechanical engineers and materials scientists alike. Because polymers are by far the most utilized class of materials for AM, this Review focuses on polymer processing and the development of polymers and advanced polymer systems specifically for AM. AM techniques covered include vat photopolymerization (stereolithography), powder bed fusion (SLS), material and binder jetting (inkjet and aerosol 3D printing), sheet lamination (LOM), extrusion (FDM, 3D dispensing, 3D fiber deposition, and 3D plotting), and 3D bioprinting....

Photopolymers with tunable mechanical properties processed by laser-based high-resolution stereolithography

Abstract: Stereolithography (SLA) is a widely used technique for the fabrication of prototypes and small series products. The main advantage of SLA and related solid freeform fabrication (SFF) techniques is their capability to fabricate parts with complex shapes with high resolution. Although the spectrum of available materials has been widened in recent years, there is still a lack of materials which can be processed with SLA on a routine basis. In this work, a micro-SLA (?SLA) system is presented which can shape a number of different photopolymers with resolutions down to 5 ?m in the xy-plane and 10 ?m in the z-direction. The system is capable of processing various specifically tailored photopolymers which are based on acrylate chemistry. The materials processed for this work range from hybrid sol?gel materials (ORMOCER) to photo-crosslinked elastomers and hydrogels. The elastic moduli of these materials can be tuned over several orders of magnitude and range from 0.1 MPa to 8000 MPa. The reactivity of these monomers is sufficient for achieving writing speeds up to 500 mm s?1 which is comparable to commercial SLA resins. Various test structures are presented which show the suitability of the process for fabricating parts required for applications in micro-mechanical systems as well as for applications in biomedical engineering. Using the presented system, internal channels with a diameter of 50 ?m and a length of 1500 ?m could be fabricated. It was also possible to manufacture a micro-mechanical system consisting of a fixed axe and a free spinning turbine wheel.

Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix

Abstract: The natural extracellular matrix (ECM) represents a complex and dynamic environment. It provides numerous spatio-temporal signals mediating many cellular functions including morphogenesis, adhesion, proliferation and differentiation. The cell–ECM interaction is bidirectional. Cells dynamically receive and process information from the ECM and remodel it at the same time. Theses complex interactions are still not fully understood. For better understanding, it is indispensable to deconstruct the ECM up to the point of investigating isolated characteristics and cell responses to physical, chemical and topographical cues. Two-photon polymerization (2PP) allows the exact reconstruction of cell specifi c sites in 3D at micro- and nanometer precision. Processing biocompatible synthetic and naturally-derived hydrogels, the microenvironment of cells can be designed to specifi cally investigate their behavior in respect to key chemical, mechanical and topographical attributes. Moreover, 3D manipulation can be performed in the presence of cells, guiding biological tissue formation in all stages of its development. Here, advances in 2PP microfabrication of synthetic and naturally based hydrogels are reviewed. Key components of photopolymerizable hydrogel precursors, their structure–property relationships and their polymerization mechanisms are presented. Furthermore, it is shown how biocompatible 2PP fabricated constructs can act as biologically relevant matrices to study cell functions and tissue development.

Laser 3D Printing with Sub‐Microscale Resolution of Porous Elastomeric Scaffolds for Supporting Human Bone Stem Cells

Abstract: A reproducible method is needed to fabricate 3D scaffold constructs that results in periodic and uniform structures with precise control at sub-micrometer and micrometer length scales. In this study, fabrication of scaffolds by two-photon polymerization (2PP) of a biodegradable urethane and acrylate-based photoelastomer is demonstrated. This material supports 2PP processing with sub-micrometer spatial resolution. The high photoreactivity of the biophotoelastomer permits 2PP processing at a scanning speed of 1000 mm s(-1), facilitating rapid fabrication of relatively large structures (>5 mm(3)). These structures are custom printed for in vitro assay screening in 96-well plates and are sufficiently flexible to enable facile handling and transplantation. These results indicate that stable scaffolds with porosities of greater than 60% can be produced using 2PP. Human bone marrow stromal cells grown on 3D scaffolds exhibit increased growth and proliferation compared to smooth 2D scaffold controls. 3D scaffolds adsorb larger amounts of protein than smooth 2D scaffolds due to their larger surface area; the scaffolds also allow cells to attach in multiple planes and to completely infiltrate the porous scaffolds. The flexible photoelastomer material is biocompatible in vitro and is associated with facile handling, making it a viable candidate for further study of complex 3D-printed scaffolds.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Abstract: Freedom of design, mass customisation, waste minimisation and the ability to manufacture complex structures, as well as fast prototyping, are the main benefits of additive manufacturing (AM) or 3D printing. A comprehensive review of the main 3D printing methods, materials and their development in trending applications was carried out. In particular, the revolutionary applications of AM in biomedical, aerospace, buildings and protective structures were discussed. The current state of materials development, including metal alloys, polymer composites, ceramics and concrete, was presented. In addition, this paper discussed the main processing challenges with void formation, anisotropic behaviour, the limitation of computer design and layer-by-layer appearance. Overall, this paper gives an overview of 3D printing, including a survey on its benefits and drawbacks as a benchmark for future research and development.

A fracture-resistant high-entropy alloy for cryogenic applications

Abstract: High-entropy alloys are equiatomic, multi-element systems that can crystallize as a single phase, despite containing multiple elements with different crystal structures. A rationale for this is that the configurational entropy contribution to the total free energy in alloys with five or more major elements may stabilize the solid-solution state relative to multiphase microstructures. We examined a five-element high-entropy alloy, CrMnFeCoNi, which forms a single-phase face-centered cubic solid solution, and found it to have exceptional damage tolerance with tensile strengths above 1 GPa and fracture toughness values exceeding 200 MPa·m(1/2). Furthermore, its mechanical properties actually improve at cryogenic temperatures; we attribute this to a transition from planar-slip dislocation activity at room temperature to deformation by mechanical nanotwinning with decreasing temperature, which results in continuous steady strain hardening.

Synthesis of Light-Emitting Conjugated Polymers for Applications in Electroluminescent Devices

Abstract: A review was presented to demonstrate a historical description of the synthesis of light-emitting conjugated polymers for applications in electroluminescent devices. Electroluminescence (EL) was first reported in poly(para-phenylene vinylene) (PPV) in 1990 and researchers continued to make significant efforts to develop conjugated materials as the active units in light-emitting devices (LED) to be used in display applications. Conjugated oligomers were used as luminescent materials and as models for conjugated polymers in the review. Oligomers were used to demonstrate a structure and property relationship to determine a key polymer property or to demonstrate a technique that was to be applied to polymers. The review focused on demonstrating the way polymer structures were made and the way their properties were controlled by intelligent and rational and synthetic design.