scispace - formally typeset
Search or ask a question
Author

Jussi Huikari

Bio: Jussi Huikari is an academic researcher from University of Jyväskylä. The author has contributed to research in topics: Neutron & Spectroscopy. The author has an hindex of 22, co-authored 93 publications receiving 1931 citations.
Topics: Neutron, Spectroscopy, Ion beam, Decay scheme, Ion


Papers
More filters
Journal ArticleDOI
13 Jan 2005-Nature
TL;DR: In this paper, the authors reported a measurement of the inverse process, where a C-12 nucleus decays to three alpha-particles, and calculated the triple-a rate for temperatures from 10(7) K to 10(10) K and found significant deviations from the standard rates, implying that the critical amounts of carbon that catalysed hydrogen burning in the first stars are produced twice as fast as previously believed.
Abstract: In the centres of stars where the temperature is high enough, three alpha-particles (helium nuclei) are able to combine to form C-12 because of a resonant reaction leading to a nuclear excited state(1). (Stars with masses greater than similar to0.5 times that of the Sun will at some point in their lives have a central temperature high enough for this reaction to proceed.) Although the reaction rate is of critical significance for determining elemental abundances in the Universe(1), and for determining the size of the iron core of a star just before it goes supernova(2), it has hitherto been insufficiently determined(2). Here we report a measurement of the inverse process, where a C-12 nucleus decays to three alpha-particles. We find a dominant resonance at an energy of similar to11 MeV, but do not confirm the presence of a resonance at 9.1 MeV (ref. 3). We show that interference between two resonances has important effects on our measured spectrum. Using these data, we calculate the triple-a rate for temperatures from 10(7) K to 10(10) K and find significant deviations from the standard rates(3). Our rate below similar to5 x 10(7) K is higher than the previous standard, implying that the critical amounts of carbon that catalysed hydrogen burning in the first stars are produced twice as fast as previously believed(4). At temperatures above 10(9) K, our rate is much less, which modifies predicted nucleosynthesis in supernovae(5,6).

213 citations

Journal ArticleDOI
TL;DR: An ion beam cooler for mass-separated radioactive ion beams has been developed and tested at the IGISOL-type mass separator facility as mentioned in this paper, where an energy spread below 1 eV and transmission efficiency of 60% were measured.
Abstract: An ion beam cooler for mass-separated radioactive ion beams has been developed and tested at the IGISOL-type mass separator facility Technical description and characteristic properties are presented An energy spread below 1 eV and transmission efficiency of 60% were measured

209 citations

Journal ArticleDOI
TL;DR: In this article, a penning trap has been installed for isobaric beam purification at the IGISOL-facility at the University of Jyvaskyla.
Abstract: A Penning trap has been installed for isobaric beam purification at the IGISOL-facility at the University of Jyvaskyla. In this paper, the technical details of this new device together with results of the first tests are presented. The mass resolving power, depending on the excitation parameters and the ion species, can be as high as 145 000 and the total transmission has been determined to be 17%. In addition, it is shown that with this experimental setup it is possible to measure atomic masses up to A=120 with accuracies of approximately 50 keV .

137 citations

Journal ArticleDOI
TL;DR: In collinear laser measurements the signal-to-noise ratio has been improved by a factor of 2 x 10(4), allowing spectroscopic measurements to be made with ion-beam fluxes of approximately 50 ions s(-1).
Abstract: A new method has been developed for increasing the sensitivity of collinear laser spectroscopy. The method utilizes an ion-trapping technique in which a continuous low-energy ion beam is cooled and accumulated in a linear Paul trap and subsequently released as a short ( $10--20\ensuremath{\mu}\mathrm{s}$) bunch. In collinear laser measurements the signal-to-noise ratio has been improved by a factor of $2\ifmmode\times\else\texttimes\fi{}{10}^{4}$, allowing spectroscopic measurements to be made with ion-beam fluxes of $\ensuremath{\sim}50\mathrm{ions}{\mathrm{s}}^{\ensuremath{-}1}$. The bunching method has been demonstrated in an on-line isotope shift and hyperfine structure measurement on radioactive ${}^{175}\mathrm{Hf}$.

130 citations

Journal ArticleDOI
TL;DR: The first on-line laser spectroscopy of cooled fission fragments is reported, and the mean-square charge radii are found to be almost identical to those of the Sr isotones and previously offered modeling of the radial changes is critically reviewed.
Abstract: The first on-line laser spectroscopy of cooled fission fragments is reported. The $^{\mathrm{96}\mathrm{--}\mathrm{102}}\mathrm{Z}\mathrm{r}$ ions, produced in uranium fission, were extracted and separated using an ion guide isotope separator. The ions were cooled and bunched for collinear laser spectroscopy by a gas-filled linear Paul trap. New results for nuclear mean-square charge radii, dipole, and quadrupole moments are reported across the $N=60$ shape change. The mean-square charge radii are found to be almost identical to those of the Sr isotones and previously offered modeling of the radial changes is critically reviewed.

104 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: Modules for Experiments in Stellar Astrophysics (MESA) as mentioned in this paper is a suite of open source, robust, efficient, thread-safe libraries for a wide range of applications in computational stellar astrophysics.
Abstract: Stellar physics and evolution calculations enable a broad range of research in astrophysics. Modules for Experiments in Stellar Astrophysics (MESA) is a suite of open source, robust, efficient, thread-safe libraries for a wide range of applications in computational stellar astrophysics. A one-dimensional stellar evolution module, MESAstar, combines many of the numerical and physics modules for simulations of a wide range of stellar evolution scenarios ranging from very low mass to massive stars, including advanced evolutionary phases. MESAstar solves the fully coupled structure and composition equations simultaneously. It uses adaptive mesh refinement and sophisticated timestep controls, and supports shared memory parallelism based on OpenMP. State-of-the-art modules provide equation of state, opacity, nuclear reaction rates, element diffusion data, and atmosphere boundary conditions. Each module is constructed as a separate Fortran 95 library with its own explicitly defined public interface to facilitate independent development. Several detailed examples indicate the extensive verification and testing that is continuously performed and demonstrate the wide range of capabilities that MESA possesses. These examples include evolutionary tracks of very low mass stars, brown dwarfs, and gas giant planets to very old ages; the complete evolutionary track of a 1 M ☉ star from the pre-main sequence (PMS) to a cooling white dwarf; the solar sound speed profile; the evolution of intermediate-mass stars through the He-core burning phase and thermal pulses on the He-shell burning asymptotic giant branch phase; the interior structure of slowly pulsating B Stars and Beta Cepheids; the complete evolutionary tracks of massive stars from the PMS to the onset of core collapse; mass transfer from stars undergoing Roche lobe overflow; and the evolution of helium accretion onto a neutron star. MESA can be downloaded from the project Web site (http://mesa.sourceforge.net/).

3,474 citations

Journal ArticleDOI
TL;DR: In this article, the authors present an updated version of the AESOPUS code used to compute stellar evolutionary tracks in Padova, which is the result of a thorough revision of put physics, together with the inclusion of the pre-main sequence phase.
Abstract: We present the updated version of the code used to compute stellar evolutionary tracks in Padova. It is the result of a thorough revision of the major in put physics, together with the inclusion of the pre‐main sequence phase, not present in our previous releases of stellar models. Another innovative aspect is the possibility of prompt ly generating accurate opacity tables fully consistent with any selected initial chemical composition, by coupling the OPAL opacity data at high temperatures to the molecular opacities computed with our AESOPUS code (Marigo & Aringer 2009). In this work we present extended sets of stellar evolutionary models for various initial chemical compositions, while other set s with different metallicities and/or different distributions of heavy elements are being computed. For the present release of models we adopt the solar distribution of heavy elements from the recent revision by Caffau et al. (2011), corresponding to a Sun’s metallicity Z≃ 0.0152. From all computed sets of stellar tracks, we also derive isochrones in several photometric systems. The aim is to provide the community with the basic tools to model star clusters and galaxies by means of population synthesis techniques.

3,392 citations

Journal ArticleDOI
TL;DR: In this work, extended sets of stellar evolutionary models for various initial chemical compositions are presented, while other set s with different metallicities and/or different distributions of heavy elements are being computed.
Abstract: We present the updated version of the code used to compute stellar evolutionary tracks in Padova. It is the result of a thorough revision of the major input physics, together with the inclusion of the pre-main sequence phase, not present in our previous releases of stellar models. Another innovative aspect is the possibility of promptly generating accurate opacity tables fully consistent with any selected initial chemical composition, by coupling the OPAL opacity data at high temperatures to the molecular opacities computed with our AESOPUS code (Marigo & Aringer 2009). In this work we present extended sets of stellar evolutionary models for various initial chemical compositions, while other sets with different metallicities and/or different distributions of heavy elements are being computed. For the present release of models we adopt the solar distribution of heavy elements from the recent revision by Caffau et al. (2011), corresponding to a Sun's metallicity Z=0.0152. From all computed sets of stellar tracks, we also derive isochrones in several photometric systems. The aim is to provide the community with the basic tools to model star clusters and galaxies by means of population synthesis techniques.

3,175 citations

Journal ArticleDOI
TL;DR: In this paper, a set of models for solar metallicity, where the effects of rotation are accounted for in a homogeneous way, is presented, and a grid of 48 different stellar evolutionary tracks, both rotating and non-rotating, at Z ǫ = 0.014, spanning a wide mass range from 0.8 to 120 m ⊙.
Abstract: Aims. Many topical astrophysical research areas, such as the properties of planet host stars, the nature of the progenitors of different types of supernovae and gamma ray bursts, and the evolution of galaxies, require complete and homogeneous sets of stellar models at different metallicities in order to be studied during the whole of cosmic history. We present here a first set of models for solar metallicity, where the effects of rotation are accounted for in a homogeneous way.Methods. We computed a grid of 48 different stellar evolutionary tracks, both rotating and non-rotating, at Z = 0.014, spanning a wide mass range from 0.8 to 120 M ⊙ . For each of the stellar masses considered, electronic tables provide data for 400 stages along the evolutionary track and at each stage, a set of 43 physical data are given. These grids thus provide an extensive and detailed data basis for comparisons with the observations. The rotating models start on the zero-age main sequence (ZAMS) with a rotation rate υ ini /υ crit = 0.4. The evolution is computed until the end of the central carbon-burning phase, the early asymptotic giant branch (AGB) phase, or the core helium-flash for, respectively, the massive, intermediate, and both low and very low mass stars. The initial abundances are those deduced by Asplund and collaborators, which best fit the observed abundances of massive stars in the solar neighbourhood. We update both the opacities and nuclear reaction rates, and introduce new prescriptions for the mass-loss rates as stars approach the Eddington and/or the critical velocity. We account for both atomic diffusion and magnetic braking in our low-mass star models.Results. The present rotating models provide a good description of the average evolution of non-interacting stars. In particular, they reproduce the observed main-sequence width, the positions of the red giant and supergiant stars in the Hertzsprung-Russell (HR) diagram, the observed surface compositions and rotational velocities. Very interestingly, the enhancement of the mass loss during the red-supergiant stage, when the luminosity becomes supra-Eddington in some outer layers, help models above 15−20 M ⊙ to lose a significant part of their hydrogen envelope and evolve back into the blue part of the HR diagram. This result has interesting consequences for the blue to red supergiant ratio, the minimum mass for stars to become Wolf-Rayet stars, and the maximum initial mass of stars that explode as type II−P supernovae.

1,654 citations

Journal ArticleDOI
TL;DR: The Modules for Experiments in Stellar Astrophysics (MESA) Isochrones and Stellar Tracks (MIST) project as discussed by the authors provides a set of stellar evolutionary tracks and isochrones computed using MESA, a state-of-the-art 1D stellar evolution package.
Abstract: This is the first of a series of papers presenting the Modules for Experiments in Stellar Astrophysics (MESA) Isochrones and Stellar Tracks (MIST) project, a new comprehensive set of stellar evolutionary tracks and isochrones computed using MESA, a state-of-the-art open-source 1D stellar evolution package. In this work, we present models with solar-scaled abundance ratios covering a wide range of ages ($5 \leq \rm \log(Age)\;[yr] \leq 10.3$), masses ($0.1 \leq M/M_{\odot} \leq 300$), and metallicities ($-2.0 \leq \rm [Z/H] \leq 0.5$). The models are self-consistently and continuously evolved from the pre-main sequence to the end of hydrogen burning, the white dwarf cooling sequence, or the end of carbon burning, depending on the initial mass. We also provide a grid of models evolved from the pre-main sequence to the end of core helium burning for $-4.0 \leq \rm [Z/H] < -2.0$. We showcase extensive comparisons with observational constraints as well as with some of the most widely used existing models in the literature. The evolutionary tracks and isochrones can be downloaded from the project website at this http URL

1,301 citations