Jyeshtharaj B. Joshi

Bio: Jyeshtharaj B. Joshi is an academic researcher from Institute of Chemical Technology. The author has contributed to research in topics: Turbulence & Bubble. The author has an hindex of 65, co-authored 577 publications receiving 17852 citations. Previous affiliations of Jyeshtharaj B. Joshi include Bhabha Atomic Research Centre & National Chemical Laboratory.

Wet air oxidation

Abstract: Wet air oxidation (WAO), involving oxidation at high temperature (125--320 C) and pressure (0.5--20 MPa) conditions, is useful for the treatment of hazardous, toxic, and nonbiodegradable waste streams. The process becomes self-sustaining when the feed chemical oxygen demand (COD) is about 20,000 mg/l and can be a net energy producer at sufficient higher feed COD's. All the published information on WAO has been analyzed and presented in a coherent manner. Wet air oxidation studies on pure compounds have been critically reviewed. Mechanism, kinetics, and structure-oxidizability correlation for WAO of carboxylic acids, phenols, cyanides, and nitriles have been described. The industrial applications discussed include municipal sewage sludge treatment, distillery waste treatment, black liquor treatment, cyanide and nitrile wastewater treatment, spent carbon regeneration, and energy and resource regeneration. Waste streams from other sources and some miscellaneous applications of WAO have also been included. Special emphasis is given to WAO under supercritical conditions (above the critical temperature of water) and oxydesulfurization of coal. In addition to the industrial applications, some other aspects (like various catalysts and oxidizing agents) of WAO have also been discussed. Recommendations and suggestions for further investigations have been made. 560 refs.

Bubble Formation and Bubble Rise Velocity in Gas−Liquid Systems: A Review

Abstract: The formation of gas bubbles and their subsequent rise due to buoyancy are very important fundamental phenomena that contribute significantly to the hydrodynamics in gas−liquid reactors. The rise o...

Catalytic carbon dioxide hydrogenation to methanol: A review of recent studies

Abstract: Methanol demand is continuously increasing in the chemical and energy industries. It is commercially produced from synthesis gas (CO + CO 2 + H 2 ) using CuO/ZnO/Al 2 O 3 catalysts. Today, much effort is being put on the development of technologies for its production from carbon dioxide (CO 2 ). In this way, the Greenhouse effect may be mitigated. Over the years, several useful works on CO 2 hydrogenation to methanol have been reported in the literature. In this article, we present a comprehensive overview of all the recent studies published during the past decade. Various aspects on this reaction system (such as thermodynamic considerations, innovations in catalysts, influences of reaction variables, overall catalyst performance, reaction mechanism and kinetics, and recent technological advances) are described in detail. The major challenges confronting methanol production from CO 2 are considered. By now, such a discussion is still missing, and we intend to close this gap in this paper.

Catalytic Properties of Ceria and CeO2-Containing Materials

Abstract: Over the past several years, cerium oxide and CeO2-containing materials have come under intense scrutiny as catalysts and as structural and electronic promoters of heterogeneous catalytic reactions. Recent developments regarding the characterization of ceria and CeO2-containing catalysts are critically reviewed with a special focus towards catalyst interaction with small molecules such as hydrogen, carbon monoxide, oxygen, and nitric oxide. Relevant catalytic and technological applications such as the use of ceria in automotive exhaust emission control and in the formulation of SO x reduction catalysts is described. A survey of the use of CeO2-containing materials as oxidation and reduction catalysts is also presented.

Metal Catalysts for Heterogeneous Catalysis: From Single Atoms to Nanoclusters and Nanoparticles.

Abstract: Metal species with different size (single atoms, nanoclusters, and nanoparticles) show different catalytic behavior for various heterogeneous catalytic reactions. It has been shown in the literature that many factors including the particle size, shape, chemical composition, metal–support interaction, and metal–reactant/solvent interaction can have significant influences on the catalytic properties of metal catalysts. The recent developments of well-controlled synthesis methodologies and advanced characterization tools allow one to correlate the relationships at the molecular level. In this Review, the electronic and geometric structures of single atoms, nanoclusters, and nanoparticles will be discussed. Furthermore, we will summarize the catalytic applications of single atoms, nanoclusters, and nanoparticles for different types of reactions, including CO oxidation, selective oxidation, selective hydrogenation, organic reactions, electrocatalytic, and photocatalytic reactions. We will compare the results o...

Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources

Abstract: Since the time of the industrial revolution, the atmospheric CO(2) concentration has risen by nearly 35 % to its current level of 383 ppm. The increased carbon dioxide concentration in the atmosphere has been suggested to be a leading contributor to global climate change. To slow the increase, reductions in anthropogenic CO(2) emissions are necessary. Large emission point sources, such as fossil-fuel-based power generation facilities, are the first targets for these reductions. A benchmark, mature technology for the separation of dilute CO(2) from gas streams is via absorption with aqueous amines. However, the use of solid adsorbents is now being widely considered as an alternative, potentially less-energy-intensive separation technology. This Review describes the CO(2) adsorption behavior of several different classes of solid carbon dioxide adsorbents, including zeolites, activated carbons, calcium oxides, hydrotalcites, organic-inorganic hybrids, and metal-organic frameworks. These adsorbents are evaluated in terms of their equilibrium CO(2) capacities as well as other important parameters such as adsorption-desorption kinetics, operating windows, stability, and regenerability. The scope of currently available CO(2) adsorbents and their critical properties that will ultimately affect their incorporation into large-scale separation processes is presented.

Carbon capture and storage (CCS): the way forward

Abstract: Carbon capture and storage (CCS) is broadly recognised as having the potential to play a key role in meeting climate change targets, delivering low carbon heat and power, decarbonising industry and, more recently, its ability to facilitate the net removal of CO2 from the atmosphere. However, despite this broad consensus and its technical maturity, CCS has not yet been deployed on a scale commensurate with the ambitions articulated a decade ago. Thus, in this paper we review the current state-of-the-art of CO2 capture, transport, utilisation and storage from a multi-scale perspective, moving from the global to molecular scales. In light of the COP21 commitments to limit warming to less than 2 °C, we extend the remit of this study to include the key negative emissions technologies (NETs) of bioenergy with CCS (BECCS), and direct air capture (DAC). Cognisant of the non-technical barriers to deploying CCS, we reflect on recent experience from the UK's CCS commercialisation programme and consider the commercial and political barriers to the large-scale deployment of CCS. In all areas, we focus on identifying and clearly articulating the key research challenges that could usefully be addressed in the coming decade.