K.H. Leong

Bio: K.H. Leong is an academic researcher from Petronas. The author has contributed to research in topics: Ultimate tensile strength & Epoxy. The author has an hindex of 18, co-authored 46 publications receiving 2753 citations. Previous affiliations of K.H. Leong include Cooperative Research Centre.

Review of applications for advanced three-dimensional fibre textile composites

Abstract: Current and future potential applications for three-dimensional (3D) fibre reinforced polymer composites made by the textile processes of weaving, braiding, stitching and knitting are reviewed. 3D textile composites have a vast range of properties that are superior to traditional 2D laminates, however to date these properties have not been exploited for many applications. The scientific, technical and economic issues impeding the more widespread use of 3D textile composites are identified. Structures that have been made to demonstrate the possible uses of 3D composites are described, and these include applications in aircraft, marine craft, automobiles, civil infrastructure and medical prosthesis.

A review of the effect of stitching on the in-plane mechanical properties of fibre-reinforced polymer composites

Abstract: This paper reviews over fifty studies into the effect of through-the-thickness stitching on the in-plane mechanical properties of fibre-reinforced polymer composites. Reviewed are the in-plane tensile, compressive, flexure, interlaminar shear, creep, fracture and fatigue properties, although little work has been undertaken on the last three properties. When comparing studies it is apparent that many contradictions exist: some studies reveal that stitching does not affect or may improve slightly the in-plane properties while others find that the properties are degraded. In reviewing these studies it is demonstrated that predicting the influence of stitching on the in-plane properties is difficult because it is governed by a variety of factors, including the type of composite (eg. type of fibre, resin, lay-up configuration), the stitching conditions (eg. type of thread, stitch pattern, stitch density, stitch tension, thread diameter), and the loading condition. The implications of these findings for the use of stitching in lightweight engineering structures are discussed.

The potential of knitting for engineering composites—a review

Abstract: Current literature on knitted composites tends to address the aspects of manufacture and characterisation separately. This paper aims to bring together these two sets of literature to provide the reader with a comprehensive understanding of the subject of knitted composites. Consequently, this paper contains a detailed outline of the current state of knitting technology for manufacturing advanced composite reinforcements. Selected mechanical properties of knitted composites, and some of the predictive models available for determining them are also reviewed. To conclude, a number of current and potential applications of knitting for engineering composites are highlighted. With a comprehensive review of the subject, it is believed that textile engineers would be able to better understand the requirements of advanced composites for knitting, and, by the same token, composites engineers can have a better appreciation of the capability and limitations of knitting for composite reinforcement. This should lead to more efficient usage and expanded application of knitted composites.

Tensile properties and failure mechanisms of 3D woven GRP composites

Abstract: Tensile tests were performed on glass reinforced polymer (GRP) composites with three-dimensional (3D) orthogonal, normal layered interlock, and offset layered interlock woven fibre architectures. The mechanical properties and failure mechanisms under tensile loading were similar for the three composites. Cracks formed at low strains within the resin-rich channels between the fibre tows and around the through-thickness binder yarns in the composites, although this damage did not alter the tensile properties. At higher applied tensile stresses the elastic modulus was reduced by 20–30% due to inelastic tow straightening and cracking around the most heavily crimped in-plane tows. Further softening occurred at higher strains by inelastic straightening of all the tows. Composite failure occurred within a localised region and the discrete tow rupture events that have caused tow lock-up and pullout mechanisms in other 3D woven composites were not observed.

Sustainable Conversion of Carbon Dioxide: An Integrated Review of Catalysis and Life Cycle Assessment

Abstract: CO2 conversion covers a wide range of possible application areas from fuels to bulk and commodity chemicals and even to specialty products with biological activity such as pharmaceuticals. In the present review, we discuss selected examples in these areas in a combined analysis of the state-of-the-art of synthetic methodologies and processes with their life cycle assessment. Thereby, we attempted to assess the potential to reduce the environmental footprint in these application fields relative to the current petrochemical value chain. This analysis and discussion differs significantly from a viewpoint on CO2 utilization as a measure for global CO2 mitigation. Whereas the latter focuses on reducing the end-of-pipe problem “CO2 emissions” from todays’ industries, the approach taken here tries to identify opportunities by exploiting a novel feedstock that avoids the utilization of fossil resource in transition toward more sustainable future production. Thus, the motivation to develop CO2-based chemistry does...

Degradation Rates of Plastics in the Environment

Abstract: Plastic waste is currently generated at a rate approaching 400 Mt year–1. The amount of plastics accumulating in the environment is growing rapidly, yet our understanding of its persistence is very...

Review of applications for advanced three-dimensional fibre textile composites

Abstract: Current and future potential applications for three-dimensional (3D) fibre reinforced polymer composites made by the textile processes of weaving, braiding, stitching and knitting are reviewed. 3D textile composites have a vast range of properties that are superior to traditional 2D laminates, however to date these properties have not been exploited for many applications. The scientific, technical and economic issues impeding the more widespread use of 3D textile composites are identified. Structures that have been made to demonstrate the possible uses of 3D composites are described, and these include applications in aircraft, marine craft, automobiles, civil infrastructure and medical prosthesis.

A review on basalt fibre and its composites

Abstract: In recent years, both industrial and academic world are focussing their attention toward the development of sustainable composites, reinforced with natural fibres. In particular, among the natural fibres (i.e. animal, vegetable or mineral) that can be used as reinforcement, the basalt ones represent the most interesting for their properties. The aim of this review is to illustrate the results of research on this topical subject. In the introduction, mechanical, thermal and chemical properties of basalt fibre have been reviewed. Moreover, its main manufacturing technologies have been described. Then, the effect of using this mineral fibre as reinforcement of different matrices as polymer (both thermoplastic and thermoset), metal and concrete has been presented. Furthermore, an overview on the application of this fibre in biodegradable matrix composites and in hybrid composites has been provided. Finally, the studies on the industrial applications of basalt fibre reinforced composites have been reviewed.

Metre-long cell-laden microfibres exhibit tissue morphologies and functions

Abstract: Artificial reconstruction of fibre-shaped cellular constructs could greatly contribute to tissue assembly in vitro. Here we show that, by using a microfluidic device with double-coaxial laminar flow, metre-long core-shell hydrogel microfibres encapsulating ECM proteins and differentiated cells or somatic stem cells can be fabricated, and that the microfibres reconstitute intrinsic morphologies and functions of living tissues. We also show that these functional fibres can be assembled, by weaving and reeling, into macroscopic cellular structures with various spatial patterns. Moreover, fibres encapsulating primary pancreatic islet cells and transplanted through a microcatheter into the subrenal capsular space of diabetic mice normalized blood glucose concentrations for about two weeks. These microfibres may find use as templates for the reconstruction of fibre-shaped functional tissues that mimic muscle fibres, blood vessels or nerve networks in vivo.