Brittle failure of components weakened by cracks or sharp and blunt V-notches is a topic of active and continuous research. It is attractive for all researchers who face the problem of fracture of materials under different loading conditions and deals with a large number of applications in different engineering fields, not only with the mechanical one. This topic is significant in all the cases where intrinsic defects of the material or geometrical discontinuities give rise to localized stress concentration which, in brittle materials, may generate a crack leading to catastrophic failure or to a shortening of the assessed structural life. Whereas cracks are viewed as unpleasant entities in most engineering materials, U- and V-notches of different acuities are sometimes deliberately introduced in design and manufacturing of structural components. Dealing with brittle failure of notched components and summarizing some recent experimental results reported in the literature, the main aim of the present contribution is to present a review of some local approaches applicable near stress raisers both sharp and blunt. The reviewed criteria allowed the present authors to develop a new approach based on the volume strain energy density (SED), which has been recently applied to assess the brittle failure of a large number of materials. The main features of the SED approach are outlined in the paper and its peculiarities and advantages accurately underlined. Some examples of applications are reported, as well. The present review is based on the authors’ experience over more than 15 years and the contents of their personal library. It is not a dispassionate literature survey.

Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches

Thank you for downloading some basic problems of the mathematical theory of elasticity. As you may know, people have search hundreds times for their favorite readings like this some basic problems of the mathematical theory of elasticity, but end up in infectious downloads. Rather than reading a good book with a cup of coffee in the afternoon, instead they cope with some infectious bugs inside their computer.

Some Basic Problems Of The Mathematical Theory Of Elasticity

In contrast to animal and fungal cells, green plant cells contain one or multiple chloroplasts, the organelle(s) in which photosynthetic reactions take place. Chloroplasts are believed to have originated from an endosymbiotic event and contain DNA that codes for some of their proteins. Most chloroplast proteins are encoded by the nuclear genome and imported with the help of sorting signals that are intrinsic parts of the polypeptides. Here, we show that a chloroplast-located protein in higher plants takes an alternative route through the secretory pathway, and becomes N-glycosylated before entering the chloroplast.

Evidence for a protein transported through the secretory pathway en route to the higher plant chloroplast.

A control studio object system is disclosed which allows a process control environment to be easily and quickly configured or modified. The control studio object system includes a stencil portion having stencil items conforming to algorithms and a diagram portion to which the stencil items may be copied via a drag and drop operation. Because the stencil items are objects which contain all of the information required by a diagram portion to create an object that contains all of the information necessary to program the process control environment, the completed diagram portion reflects the actual configuration of the process control environment. Additionally, providing the stencil items as objects allows the diagrammed environment to be installed directly to nodes without requiring the diagram to be compiled or rewritten in a language conforming to the node.

System for configuring a process control environment

Quality-guided phase unwrapping is a widely used technique with different quality definitions and guiding strategies reported. It is thus necessary to do a detailed comparison of these approaches to choose the optimal quality map and guiding strategy. For quality maps, in the presence of noise, transform-based methods are found to be the best choice. However in the presence of discontinuities, phase unwrapping is itself unresolved and hence quality-guided phase unwrapping is not sufficient. For guiding strategies, classical, two-section, and stack-chain guiding strategies are chosen for comparison. If accuracy is the foremost criterion then the classical guiding strategy with a data structure of indexed interwoven linked list is best. If speed is of essence then the stack-chain guiding strategy is the one to use.

Quality-guided phase unwrapping technique: comparison of quality maps and guiding strategies

Classification of crack-tip isochromatics in orthotropic composites

The Failure Assessment Diagram (FAD) is a simplified and robust flaw assessment methodology which simultaneously connects two dominant failure criteria: Linear Elastic Fracture mechanics (LEFM) on one end and Plastic collapse on other end. This interaction is the realm of Elastic Plastic Fracture Mechanics (EPFM.) It is popularly known as the R6 approach which graphically characterizes the impact of plasticity on crack driving force. In the recent years, there has been continuous interest in using Failure Assessment Diagrams (FAD) to assess the failure of cracked structures subjected to biaxial loadings. Biaxiality is defined as the ratio of stress applied parallel and normal to the crack. Some aircraft components operate under negative biaxial ratios up to −0.5. In this paper, a detailed study on FAD was conducted using FEA computed J-integral methods to investigate the effect of biaxial loading using different FAD approaches for geometries with notches. Geometries with a crack that emanates at a fillet region were simulated with various biaxial loading ratios from −0.5 to +0.5 using 2014-T6 material. FAD curves were numerically generated for cracks at notched regions subjected to various biaxial loadings using J-integral values from finite element analyses and validated its practical application. Comparison studies were made between uniaxial and biaxial loading cases with FAD curves created using standard approaches for four different crack sizes. Under small scale yielding, this study clearly shows that FAD curves are not influenced by negative biaxial loading at low load (up to 40% of yield strength). It was clearly confirmed that the majority of previously developed analytical FAD curves do not effectively account for notch and plasticity effects due to negative biaxilaity. Based on this study, tension normal to the crack and compression parallel to the crack is the worst combination and it has a very pronounced effect on FAD curve shapes. The standard analytical FAD curves are non-conservative compared to the approach recommended here, particularly under the worst case condition. The proposed method is expected to predict lower failure loads relative to currently accepted analytical methods.Copyright © 2008 by ASME

Effects of Negative Biaxial Loadings and Notch on Failure Assessment Diagrams

This study focuses on the failure of blades which is one of the critical parts of the compressor and turbine. Experiments are performed on the aero-engine compressor blade model of dovetail joint using the technique of photoelasticity. First, the high-stress concentration zone is found. This is along the contact surface of the blade and disc. Two different configurations of cracks located in this zone are studied further. The stress intensity factors for mixed mode loading are evaluated using over-deterministic nonlinear least squares approach.

Evaluation of Fracture Parameters of Cracks in Compressor Blade Root Using Digital Photoelasticity

The application of digital image processing (DIP) techniques to photoelasticity has greatly simplified data reduction and analysis. The softwares reported so far are hardware dependent and hence not portable. A simple PC based device independent software for collection of photoelastic data from digitised fringe patterns is presented. The software is validated by evaluating the near crack tip stress field parameters for a crack subjected to mode I and mode II loadings.

K. Ramesh

Papers

Classification of crack-tip isochromatics in orthotropic composites

Effects of Negative Biaxial Loadings and Notch on Failure Assessment Diagrams

Evaluation of Fracture Parameters of Cracks in Compressor Blade Root Using Digital Photoelasticity

Towards a device independent digital image processing software for photoelastic analysis

Experimental Stress Analysis